AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330104-00-10-05-12-05
In Stock
Ships by Thursday, August 20
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330104-00-10-05-12-05
-
Product Model330104-00-10-05-12-05
-
Product Parameters3300 XL 8 mm Probe, M10 x 1 thread,with armor
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size1.8x1.6x124cm
-
ManufacturerBently Nevada
-
Weight0.15 kg
-
Unthreaded Length Option0 mm
-
Overall Case Length Option100 mm
-
Total Length Option0.5 meter (1.6 feet)
-
Connector and Cable-Type OptioMiniature coaxial ClickLocconnector, FluidLoc cable
-
Agency Approval OptionCSA, ATEX, IECEx Approvals
Description
The 330104-00-10-05-12-05 is a 3300XL 8mm Proximity Probe with M10 x 1 thread and armor, as a critical component of the 3300XL 8mm Proximity Transducer System. The 330104-00-10-05-12-05 provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The primary applications of the 330104-00-10-05-12-05 include vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements.
The 330104-00-10-05-12-05 incorporates numerous mechanical improvements over previous designs. The 330104-00-10-05-12-05 features a patented TipLoc molding method that provides a more robust bond between the probe tip and the probe body. As an 8mm probe, the 330104-00-10-05-12-05 provides a thicker encapsulation of the probe coil in the molded PPS plastic probe tip, resulting in a more rugged probe, and the larger diameter of the probe body provides a stronger, more robust case. The 330104-00-10-05-12-05 is configured with an M10 x 1 thread and includes armor for enhanced mechanical protection in demanding industrial environments.
Information
Overview
Manuals
Application Notes
Product Applications
Probe Insertion & Gapping
Features:
- M10 x 1 Metric Thread with Armor Protection
- Patented TipLoc Molding Method
- Patented CableLoc Design with 330 N Pull Strength
- 5.0 Meter Total Length for 5-Meter Proximitor Sensor
- ClickLoc Connector with Connector Protector and Standard Cable
The system provides an output voltage that is directlyproportional to the distance between the probe tip and theobserved conductive surface and can measure both static(position) and dynamic (vibration) values. The system’sprimary applications are vibration and positionmeasurements on fluid-film bearing machines, as well asKeyphasor reference and speed measurements.
The 330104-00-10-05-12-05 is configured with an M10 x 1 thread and includes armor for enhanced mechanical protection in demanding industrial environments.
The 330104-00-10-05-12-05 Bently Nevada 3300 XL 8 mm Probe, M10 x 1 thread,with armor may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-00-10-05-12-05 3300 XL 8 mm Probe, M10 x 1 thread,with armor Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
When combined with a 3300 XL Proximitor Sensor and XL extension cable, the 330104-00-10-05-12-05 provides an output voltage directly proportional to the distance between the probe tip and the observed conductive surface. The system using the 330104-00-10-05-12-05 can measure both static (position) and dynamic (vibration) data. Its primary use is in vibration and position measurement applications on fluid-film bearing machines, as well as Keyphasor and speed measurement applications.
The 330104-00-10-05-12-05 delivers a linear range of 2 mm (80 mils), beginning at approximately 0.25 mm from the target surface. The incremental scale factor of the 330104-00-10-05-12-05 is 7.87 V/mm (200 mV/mil) ±5% typical, including interchangeability error when measured in increments of 0.25 mm over the linear range. The deviation from the best fit straight line is less than ±0.025 mm (±1 mil) typical. Over the probe temperature range of –52°C to +177°C, the incremental scale factor remains within ±10% of 7.87 V/mm, and the deviation from the best fit straight line remains within ±0.076 mm (±3 mils).
- Oil/Gas/Petrochemical: Monitors compressors, gas turbines, and large pump health
- Power Generation: Tracks vibration/shaft position in steam/hydro turbines to prevent failures
- Municipal/Water: Manages heavy-duty pumps and wastewater centrifuges
- Hazardous Environments: CN/ATEX/IECEx approved for explosive/volatile zones
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Nominal Gap: The probe should be gapped so that the DC output voltage is between -9.0 Vdc and -11.0 Vdc when the target shaft is centered.Gap Distance: For standard AISI 4140 steel, this optimal gap usually corresponds to 1.27 mm (50 mils or 0.050 inches).Locknuts: Thread the probe through the mounting bracket until it touches the shaft, back it off to the 1.27 mm (50 mil) distance, and firmly tighten the locknuts to prevent shifting.
Alternative Names
330104-00-10-05-12-O5
330104-00-10-05-I2-05
330104-00-10-05-1Z-05
330104-00-10-O5-12-05
330104-00-1O-05-12-05
330104-00-I0-05-12-05
330104-OO-10-05-12-05
3301O4-00-10-05-12-05
330I04-00-10-05-12-05
33O104-00-10-05-12-05
330104 00 10 05 12 05
330104 00 10 05 12 O5
330104 00 10 05 I2 05
330104 00 10 O5 12 05
330104 00 10 05 1Z 05
330104 00 I0 05 12 05
3301O4 00 10 05 12 05
33O104 00 10 05 12 05
330104-00-10-05-12-00
330104-00-10-05-12-CN
330104-00-10-05-12-BR
Technical notes
The 330104-00-10-05-12-05 operates within a standard temperature range of -52°C to +177°C (-62°F to +350°F) for the probe tip and cable. The 330104-00-10-05-12-05 supports complete interchangeability of probes, extension cables, and Proximitor sensors within the 3300XL 8mm system, eliminating the need to match or bench calibrate individual components. Furthermore, the 330104-00-10-05-12-05 is backward compatible and both electrically and physically interchangeable with non-XL 3300 series 5mm and 8mm transducer system components, providing flexibility for system upgrades and maintenance.
FAQs
-
What is the recommended installation torque?
+When installing the probe into a machine case or bracket, you should apply the recommended torque of 11.2 N·m (100 in·lbf). Do not exceed the maximum allowable torque of 33.9 N·m (300 in·lbf). -
What target materials is this calibrated for?
+Proximitor sensors are factory-calibrated by default to AISI 4140 steel. If you are using a different target material, you will need to request a special calibration from the manufacturer -
What is the primary purpose of this proximity probe?
+The eddy current probe measures static and dynamic distance between the probe tip and a target material (like a rotating shaft). It is ideal for monitoring vibration, thrust position, and speed within fluid-film bearing clearances -
What is the standard calibration of this sensor system?
+Proximitor sensors are calibrated by default to AISI 4140 steel. If your target material is different, you must request special factory calibration.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
-
330104-00-10-05-12-053300 XL 8 mm Probe, M10 x 1 thread,with armorManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
