PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330104-10-15-10-01-05
In Stock
Fast Shipping Available
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330104-10-15-10-01-05 - Armored Proximity Probe
Bently Nevada 330104-10-15-10-01-05 is a 3300 XL 8 mm armored proximity probe with M10 x 1 threads. The exact order selects 1.0 m total probe length and clickloc with protector; standard cable.
The ordered unthreaded section is 100 mm and the overall case length is 150 mm. Approval option 05 selects CSA, ATEX and IECEx approvals, subject to the actual marking and certificate conditions. Verify the target, electrical system length and matching Proximitor before replacement.
The ordered unthreaded section is 100 mm and the overall case length is 150 mm. Approval option 05 selects CSA, ATEX and IECEx approvals, subject to the actual marking and certificate conditions. Verify the target, electrical system length and matching Proximitor before replacement.
BEFORE YOU BUY
Check the complete ordered configuration
ACTUAL APPLICATIONS
Where 330104-10-15-10-01-05 supports measurement tasks
Manufacturer literature supports the following measurement arrangements. Confirm the complete installed system and the exact ordered configuration before selecting this component.
-
01 · RADIAL MOTION
Measure shaft vibration without contact
The 3300 XL 8 mm system is intended for dynamic shaft measurements on fluid-film bearing machinery. This armored proximity probe must fit the mounting arrangement and conductive target. Preserve the selected 1.0 m probe and the matching total electrical system length when connecting it to the Proximitor and vibration monitor. -
02 · STATIC POSITION
Track the conductive target position
Use the probe as part of the documented XL 8 mm transducer chain for static position measurement. The M10 x 1 mechanical interface and selected lead construction must suit the installation. Establish the operating gap, target material calibration and monitor range from the complete equipment instructions, not from case length. -
03 · ROTATION REFERENCE
Supply a Keyphasor timing reference
The manufacturer lists Keyphasor reference and speed measurements among the family applications. Engineer the target feature and full signal path for that purpose. Assess any overspeed-protection use against the specific manufacturer application note and the complete protection design; the probe alone does not provide that function.
Technical specifications for 330104-10-15-10-01-05
-
Product Model330104-10-15-10-01-05
-
Product ParametersArmored Proximity Probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Unthreaded length option10: 100 mm
-
Overall case length option15: 150 mm
-
Total length option10: 1.0 m
-
Connector and cable-type option01: ClickLoc with protector; standard cable
-
Agency approval option05: CSA, ATEX, IECEx
-
Case threadM10 x 1
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 303 or 304 stainless steel
-
Recommended case torque11.2 N m; 7.5 N m for first three threads
-
Case-to-lead tensile rating330 N maximum
-
Connector materialGold-plated brass or beryllium copper
-
Armor constructionAISI 302 or 304 stainless steel; FEP jacket
View all additional
Alternative Names
330104-10-15-10-01-05
3301041015100105
Bently Nevada 330104-10-15-10-01-05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match the installed measurement arrangement
Bently Nevada 330104-10-15-10-01-05 is a 3300 XL 8 mm armored proximity probe with M10 x 1 threads. The exact order selects 1.0 m total probe length and clickloc with protector; standard cable.
The ordered unthreaded section is 100 mm and the overall case length is 150 mm. Approval option 05 selects CSA, ATEX and IECEx approvals, subject to the actual marking and certificate conditions. Verify the target, electrical system length and matching Proximitor before replacement.
Treat the probe, extension cable where applicable and Proximitor as one electrical measurement arrangement. Preserve the target calibration, cable routing, connector protection and monitor settings documented for the machine.
Features:
- M10 x 1 case thread
- 1.0 m total probe length
- Protected standard-cable connector
The 330104-10-15-10-01-05 requires exact configuration and installation checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare the complete ordered configuration with the installed label and drawing. Similar case dimensions do not establish equivalence between thread forms, cable constructions or approval options.
The ordered unthreaded section is 100 mm and the overall case length is 150 mm. Approval option 05 selects CSA, ATEX and IECEx approvals, subject to the actual marking and certificate conditions. Verify the target, electrical system length and matching Proximitor before replacement.
The downloads comprise a model-specific data summary, identified manufacturer technical-data pages and a limited installation checklist. Obtain the complete transducer instructions before commissioning.
Features:
- M10 x 1 case thread
- Protected standard-cable connector
- Armored cable construction
The 330104-10-15-10-01-05 requires replacement verification of the complete ordered configuration and installed measurement system before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The Manufacturer's Manual download is a manufacturer technical-data extract, not a complete operation manual. The installation guide contains only source-supported checks. Specifications of other configurations shown on source pages must not be applied to this exact order.
Features:
- Sources: Bently Nevada 141194 Rev. AM
- Use complete equipment instructions for installation and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 330104-10-15-10-01-05 is supplied here as a technical-data extract; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.4 × 3.3 cm
-
Shipping weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330104-10-15-10-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How much unthreaded case is selected by the leading 10 option?
For the metric 330104 order table, 10 means 100 mm of unthreaded length. It is not the same field as the later 10 total-length option, which selects a 1.0 m probe. -
Does the 150 mm case satisfy the metric length-ordering constraint?
Yes. The 100 mm unthreaded length is 50 mm shorter than the 150 mm overall case length, exceeding the manufacturer minimum difference of 20 mm. This ordering check does not replace a drawing-based fit check. -
What material forms the flexible armor around the cable?
The manufacturer lists flexible AISI 302 or 304 stainless steel with an FEP outer jacket. This is armor construction, not the separate AISI 303 or 304 probe case material. -
Can armor be used to pull the installed connector through a restrictive conduit?
The armor option does not waive cable and connector load limits. Plan the route and protectors before installation; the manufacturer also offers separately fitted protectors for restrictive conduit situations. -
What are the two separate tensile limits relevant to handling?
The datasheet gives 330 N maximum rated strength from probe case to lead and 270 N at the probe-lead to extension-cable connection. Neither value should be treated as a routine installation pulling load. -
Will standard cable carry the PFA insulation claim of an ETR cable?
No. Standard cable is documented as 75-ohm triaxial cable with FEP insulation. PFA insulation is listed for the Extended Temperature Range construction, not this 01 standard-cable order. -
What temperature caution remains below -34 degrees C?
The manufacturer warns that exposure below -34 degrees C may cause premature pressure-seal failure. A broader electrical operating-temperature range does not remove that specific seal limitation. -
Are ISO housing threads implied by the 05 certification suffix?
No. The model family identifies M10 x 1 case threads; the final 05 is the agency approval selection. Keep mechanical connection data separate from certification information.
READY TO VERIFY YOUR PART?
Get a 330104-10-15-10-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
