PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330105-02-12-90-12-00
In Stock
Fast Shipping Available
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330105-02-12-90-12-00 - Reverse-mount Proximity Probe
Bently Nevada 330105-02-12-90-12-00 is a 3300 XL 8 mm reverse-mount proximity probe with 3/8-24 UNF threads. The exact order selects 9.0 m total probe length and clickloc; fluidloc cable.
The fixed 330105-02-12 prefix identifies the reverse-mount design; it must not be decoded using the forward-mount case-length table. The final 00 specifies approvals not required. Verify the target, electrical system length and matching Proximitor before replacement.
The fixed 330105-02-12 prefix identifies the reverse-mount design; it must not be decoded using the forward-mount case-length table. The final 00 specifies approvals not required. Verify the target, electrical system length and matching Proximitor before replacement.
BEFORE YOU BUY
Check the complete ordered configuration
ACTUAL APPLICATIONS
Where 330105-02-12-90-12-00 supports measurement tasks
Manufacturer literature supports the following measurement arrangements. Confirm the complete installed system and the exact ordered configuration before selecting this component.
-
01 · RADIAL MOTION
Measure shaft vibration without contact
The 3300 XL 8 mm system is intended for dynamic shaft measurements on fluid-film bearing machinery. This reverse-mount proximity probe must fit the mounting arrangement and conductive target. Preserve the selected 9.0 m probe and the matching total electrical system length when connecting it to the Proximitor and vibration monitor. -
02 · STATIC POSITION
Track the conductive target position
Use the probe as part of the documented XL 8 mm transducer chain for static position measurement. The 3/8-24 UNF mechanical interface and selected lead construction must suit the installation. Establish the operating gap, target material calibration and monitor range from the complete equipment instructions, not from case length. -
03 · ROTATION REFERENCE
Supply a Keyphasor timing reference
The manufacturer lists Keyphasor reference and speed measurements among the family applications. Engineer the target feature and full signal path for that purpose. Assess any overspeed-protection use against the specific manufacturer application note and the complete protection design; the probe alone does not provide that function.
Technical specifications for 330105-02-12-90-12-00
-
Product Model330105-02-12-90-12-00
-
Product ParametersReverse-mount Proximity Probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Total length option90: 9.0 m
-
Connector and cable-type option12: ClickLoc; FluidLoc cable
-
Agency approval option00: Not required
-
Case thread3/8-24 UNF
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 303 or 304 stainless steel
-
Recommended case torque7.5 N m, reverse mount
-
Case-to-lead tensile rating330 N maximum
-
Connector materialGold-plated brass or beryllium copper
-
Maximum connector torque0.565 N m
-
Maximum case torque22.6 N m
-
Probe-to-extension tensile rating270 N maximum
View all additional
Alternative Names
330105-02-12-90-12-00
3301050212901200
Bently Nevada 330105-02-12-90-12-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match the installed measurement arrangement
Bently Nevada 330105-02-12-90-12-00 is a 3300 XL 8 mm reverse-mount proximity probe with 3/8-24 UNF threads. The exact order selects 9.0 m total probe length and clickloc; fluidloc cable.
The fixed 330105-02-12 prefix identifies the reverse-mount design; it must not be decoded using the forward-mount case-length table. The final 00 specifies approvals not required. Verify the target, electrical system length and matching Proximitor before replacement.
Treat the probe, extension cable where applicable and Proximitor as one electrical measurement arrangement. Preserve the target calibration, cable routing, connector protection and monitor settings documented for the machine.
Features:
- 3/8-24 UNF case thread
- 9.0 m total probe length
- FluidLoc cable
The 330105-02-12-90-12-00 requires exact configuration and installation checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare the complete ordered configuration with the installed label and drawing. Similar case dimensions do not establish equivalence between thread forms, cable constructions or approval options.
The fixed 330105-02-12 prefix identifies the reverse-mount design; it must not be decoded using the forward-mount case-length table. The final 00 specifies approvals not required. Verify the target, electrical system length and matching Proximitor before replacement.
The downloads comprise a model-specific data summary, identified manufacturer technical-data pages and a limited installation checklist. Obtain the complete transducer instructions before commissioning.
Features:
- 3/8-24 UNF case thread
- FluidLoc cable
- Reverse-mount construction
The 330105-02-12-90-12-00 requires replacement verification of the complete ordered configuration and installed measurement system before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The Manufacturer's Manual download is a manufacturer technical-data extract, not a complete operation manual. The installation guide contains only source-supported checks. Specifications of other configurations shown on source pages must not be applied to this exact order.
Features:
- Sources: Bently Nevada 141194 Rev. AM
- Use complete equipment instructions for installation and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 330105-02-12-90-12-00 is supplied here as a technical-data extract; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.4 × 3.3 cm
-
Shipping weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330105-02-12-90-12-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 02-12 a pair of adjustable length options on this reverse-mount design?
No. The manufacturer lists 330105-02-12 as the fixed reverse-mount prefix with 3/8-24 UNF threads. Its configurable suffix fields are total length, connector/cable type and approval selection; do not decode it using the forward-mount length table. -
Why retain FluidLoc when a reverse-probe sleeve is already present?
The ordered cable option is 12, which specifies FluidLoc. The manufacturer says FluidLoc is unnecessary in most reverse-mount installations because of the sleeve, but that does not authorize changing an existing exact order. Review the actual liquid-migration risk before substitution. -
Does the 90 field describe a ninety-metre lead?
No. It selects a total probe length of 9.0 metres. Keep this distinct from the dimensions of the probe case and the external housing sleeve. -
What tightening value belongs to the reverse-mount probe case?
The datasheet recommends 7.5 N m and lists 22.6 N m as the maximum rated case torque for reverse-mount probes. These values are not connector torque settings; use the controlled mounting instructions. -
Can purchasing describe this 00-approved variant as ATEX-certified?
No. The final 00 selects approvals not required. A certification attached to an optional 05 version or another assembly cannot be transferred to this order. -
Are the connector contacts bare stainless steel?
The documented connector materials are gold-plated brass or gold-plated beryllium copper. Inspect actual connector identity before applying cleaning or mating procedures for another connector family. -
Should a complete nine-metre cable be treated as an independently calibrated instrument?
No. The probe must operate with the compatible Proximitor and the correct total electrical system length. The probe length alone does not establish the monitor scaling or the machine protection configuration. -
Does the selected FluidLoc option make the probe an ETR version?
No. FluidLoc controls fluid migration through the cable interior. Extended Temperature Range is a separately identified probe/cable construction; do not claim ETR temperature ratings from the 12 FluidLoc code.
READY TO VERIFY YOUR PART?
Get a 330105-02-12-90-12-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
