PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Proximity transducer extension cable
Bently Nevada 330130-060-00-05 is a proximity extension cable. The extension cable connects the compatible proximity probe to its Proximitor Sensor. It forms part of the calibrated sensing-chain length rather than a general field-wire run, so the probe and cable combination must match the selected sensor.
This ordering code specifies a 6 m extension cable. The documented standard cable construction must be selected with its stated connector and environmental limits. Check the complete matched system before installation.
This ordering code specifies a 6 m extension cable. The documented standard cable construction must be selected with its stated connector and environmental limits. Check the complete matched system before installation.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 8 mm proximity transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · SHAFT VIBRATION
Fluid-film bearing vibration channels
The cable connects a compatible shaft probe to the signal conditioner for vibration measurement. This record specifies 6 m of extension cable, not the complete system length. -
02 · STATIC POSITION
Position-monitoring probe connections
The cable completes the calibrated connection used to observe a conductive target and measure static position. This record specifies 6 m of extension cable, not the complete system length. -
03 · PHASE REFERENCE
Keyphasor sensing-chain connections
The documented phase-reference application requires the correctly matched probe and sensor electrical length. This record specifies 6 m of extension cable, not the complete system length.
Technical specifications for 330130-060-00-05
-
Product Model330130-060-00-05
-
Spare Model330130-060-00-05
-
Product ParametersProximity transducer extension cable
-
In stock4 units
-
ManufacturerBently Nevada
-
Cable length6 m
-
Cable selectionStandard cable
-
ArmorWithout armor
-
Cable construction75 ohm triaxial
-
Cable insulationFEP
-
Minimum bend radius25.4 mm
-
Operating and storage range-52 to +177 deg C
-
Connector materialGold-plated brass or beryllium copper
-
Maximum connector torque0.565 N m
-
Connector tighteningFinger tight
-
Nominal center-conductor resistance1.32 +/-0.21 ohm
-
Nominal shield resistance0.39 +/-0.08 ohm
-
Typical capacitance69.9 pF/m
-
Connector protectorNot included
-
Approval optionMultiple approvals; verify delivered marking
View all additional
Alternative Names
330130 060 00 05
330130-060-00-05 proximity extension cable
Bently Nevada 330130-060-00-05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
PROXIMITY TRANSDUCER EXTENSION CABLE
Integrating 330130-060-00-05
The extension cable connects the compatible proximity probe to its Proximitor Sensor. It forms part of the calibrated sensing-chain length rather than a general field-wire run, so the probe and cable combination must match the selected sensor.
Probe and extension cable lengths must add to the configured Proximitor length. Mixed XL and non-XL 5 mm or 8 mm systems are limited to non-XL performance; a one-metre system does not use an extension cable.
Protect the connector from liquids and contamination, avoid sharp bends, and follow the controlled transducer installation instructions. The extension cable rating is separate from the probe rating; do not transfer a short-term probe temperature allowance to the cable.
Features:
- Match cable construction, electrical length, connectors and matching probe
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330130-060-00-05 proximity extension cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330130-060-00-05 requires comparing cable construction, electrical length, connectors and matching probe. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Probe and extension cable lengths must add to the configured Proximitor length. Mixed XL and non-XL 5 mm or 8 mm systems are limited to non-XL performance; a one-metre system does not use an extension cable.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330130-060-00-05 proximity extension cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330130-060-00-05 proximity extension cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544200000
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330130-060-00-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What type of cable is 330130-060-00-05?
This ordering code specifies a 6 m extension cable. The documented standard cable construction must be selected with its stated connector and environmental limits. Check the complete matched system before installation. -
What is the role of this extension cable?
The extension cable connects the compatible proximity probe to its Proximitor Sensor. It forms part of the calibrated sensing-chain length rather than a general field-wire run, so the probe and cable combination must match the selected sensor. -
Can it be selected by connector appearance alone?
Probe and extension cable lengths must add to the configured Proximitor length. Mixed XL and non-XL 5 mm or 8 mm systems are limited to non-XL performance; a one-metre system does not use an extension cable. -
Which monitoring applications can use the cable?
The cable completes the calibrated connection used to observe a conductive target and measure static position. -
What installation precautions apply?
Protect the connector from liquids and contamination, avoid sharp bends, and follow the controlled transducer installation instructions. The extension cable rating is separate from the probe rating; do not transfer a short-term probe temperature allowance to the cable. -
Does 6 m describe the complete transducer system?
No. Add the compatible probe lead length and match the total to the Proximitor Sensor ordering option. Do not shorten or substitute sensing cables as though they were ordinary field wiring. -
Is the cable construction fully confirmed?
The selected option is supported by the current ordering table. Check the exact suffix and delivered approval marking.
READY TO VERIFY YOUR PART?
Get a 330130-060-00-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
