PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Proximity signal conditioning sensor
Bently Nevada 330180-X0-05 is a Proximitor Sensor. The sensor conditions the signal from a matched proximity probe and cable. Together, the calibrated sensing chain provides a voltage related to conductive-target position for static measurements and dynamic vibration monitoring; probe family and total electrical length must agree.
Match the selected mounting and calibrated length to the installed probe and extension cable. Approval markings and any factory modification require separate confirmation; neither a similar enclosure nor a shared base number establishes interchangeability.
Match the selected mounting and calibrated length to the installed probe and extension cable. Approval markings and any factory modification require separate confirmation; neither a similar enclosure nor a shared base number establishes interchangeability.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 8 mm proximity transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · VIBRATION CHANNELS
Bearing vibration signal conditioning
The sensor conditions the compatible shaft-probe signal for a configured vibration-monitoring channel. Match the probe and extension cable to the calibrated total system length before commissioning. -
02 · POSITION CHANNELS
Static shaft-position measurement
The complete sensing chain produces a voltage related to the conductive-target gap. The sensor interfaces that measurement with the configured position monitor; it is not interchangeable with a different probe-family conditioner. -
03 · PHASE REFERENCE
Keyphasor signal conditioning
A compatible probe and sensor chain provides the manufacturer-documented phase-reference or speed measurement. The monitor configuration and target arrangement must suit the application, with separate guidance for overspeed protection.
Technical specifications for 330180-X0-05
-
Product Model330180-X0-05
-
Product ParametersProximity signal conditioning sensor
-
In stock3 units
-
ManufacturerBently Nevada
-
Agency approval optionCSA, ATEX and IECEx option; verify delivered certificate
-
Compatible probe input3300 5 mm or 3300 XL 8 mm probe and extension cable
-
Supply without barriers-17.5 to -26 Vdc; see controlled installation drawing
-
Supply with barriers-23 to -26 Vdc
-
Maximum current consumption12 mA
-
Output resistance50 ohm
-
Sensitivity to supply changeLess than 2 mV/V
-
Sensor housing materialA308 aluminum
-
Sensor operating temperature-52 to +100 deg C
-
Sensor storage temperature-52 to +105 deg C
-
Field terminalsSpringLoc terminal strips
View all additional
Alternative Names
330180-X0-05 Proximitor Sensor
3300 XL 8 mm proximity transducer system 330180-X0-05
Bently Nevada 330180 X0 05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
PROXIMITY SIGNAL CONDITIONING SENSOR
Integrating 330180-X0-05
The sensor conditions the signal from a matched proximity probe and cable. Together, the calibrated sensing chain provides a voltage related to conductive-target position for static measurements and dynamic vibration monitoring; probe family and total electrical length must agree.
The input accepts the documented 3300 5 mm or 3300 XL 8 mm probe/cable combination. Mixed XL/non-XL systems are limited to non-XL specifications. A one-metre configuration uses a one-metre probe with no extension cable.
Use the correct insulating mounting arrangement and controlled field-wiring instructions. Observe the sensor temperature limits rather than the hotter probe rating. A supply more positive than -23.5 Vdc may reduce the published linear range; barrier installations require their specified supply range.
Features:
- Match complete ordering options, electrical length, mounting and the installed measuring chain
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330180-X0-05 Proximitor Sensor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330180-X0-05 requires comparing complete ordering options, electrical length, mounting and the installed measuring chain. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The input accepts the documented 3300 5 mm or 3300 XL 8 mm probe/cable combination. Mixed XL/non-XL systems are limited to non-XL specifications. A one-metre configuration uses a one-metre probe with no extension cable.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330180-X0-05 Proximitor Sensor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330180-X0-05 Proximitor Sensor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8x6x6.2cm
-
Shipping weight0.22 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330180-X0-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 330180-X0-05 identified?
330180-X0-05 is a Proximitor Sensor. Match the selected mounting and calibrated length to the installed probe and extension cable. Approval markings and any factory modification require separate confirmation; neither a similar enclosure nor a shared base number establishes interchangeability. -
What is the function of this Proximitor Sensor?
The sensor conditions the signal from a matched proximity probe and cable. Together, the calibrated sensing chain provides a voltage related to conductive-target position for static measurements and dynamic vibration monitoring; probe family and total electrical length must agree. -
Which components are compatible with 330180-X0-05?
The input accepts the documented 3300 5 mm or 3300 XL 8 mm probe/cable combination. Mixed XL/non-XL systems are limited to non-XL specifications. A one-metre configuration uses a one-metre probe with no extension cable. -
Where is this product family used?
The complete sensing chain produces a voltage related to the conductive-target gap. The sensor interfaces that measurement with the configured position monitor; it is not interchangeable with a different probe-family conditioner. -
What power-supply and mounting checks are needed for this Proximitor Sensor?
Use the correct insulating mounting arrangement and controlled field-wiring instructions. Observe the sensor temperature limits rather than the hotter probe rating. A supply more positive than -23.5 Vdc may reduce the published linear range; barrier installations require their specified supply range. -
Can the hotter probe temperature rating be used for the sensor?
No. The Proximitor Sensor operating range is -52 to +100 deg C, with storage from -52 to +105 deg C. Probe and cable limits are published separately and must not be substituted for the sensor rating. -
What happens if the supply is more positive than -23.5 Vdc?
The manufacturer warns that this can reduce the linear range. Observe the applicable non-incendive installation drawing and the separate -23 to -26 Vdc supply requirement for barrier installations.
READY TO VERIFY YOUR PART?
Get a 330180-X0-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
