PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330180-X1-05 MOD:145004-75
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330180-X1-05 MOD:145004-75 3300 XL Proximitor Sensor
Bently Nevada 330180-X1-05 MOD:145004-75 is a 3300 XL Proximitor Sensor in the 3300 XL 8mm Proximity Transducer family. It powers a compatible eddy-current probe chain and converts probe impedance changes into a conditioned voltage signal for the monitoring channel.
The ordered build specifies sensor family of 3300 XL Proximitor Sensor, system length and mounting field of X1 unresolved, approval option of CSA, ATEX and IECEx, modification reference of 145004-75, compatible probe systems of 3300 5 mm and 3300 XL 8 mm, and supply without barriers of -17.5 to -26 V DC. These values define the supplied configuration and should be matched to the installed measurement system.
The ordered build specifies sensor family of 3300 XL Proximitor Sensor, system length and mounting field of X1 unresolved, approval option of CSA, ATEX and IECEx, modification reference of 145004-75, compatible probe systems of 3300 5 mm and 3300 XL 8 mm, and supply without barriers of -17.5 to -26 V DC. These values define the supplied configuration and should be matched to the installed measurement system.
BEFORE YOU BUY
Confirm the complete proximity signal conditioning sensor
ACTUAL APPLICATIONS
Application fields for 330180-X1-05 MOD:145004-75
330180-X1-05 MOD:145004-75 is applicable across the following broad industrial fields, subject to verified project requirements.
-
01 · WATER & WASTEWATER
Municipal Water and Industrial Wastewater Services
Drinking Water TreatmentIndustrial Wastewater Recovery -
02 · RENEWABLE ENERGY
Wind, Solar and Energy Storage Development
Solar Energy DevelopmentBattery Energy Storage -
03 · SEMICONDUCTOR
Semiconductor and Electronic Component Manufacturing
Microelectronic Product ManufacturingElectronic Materials Production
Technical specifications for 330180-X1-05 MOD:145004-75
-
Product Model330180-X1-05 MOD:145004-75
-
Product Parameters3300 XL Proximitor Sensor
-
In stock1 unit
-
ManufacturerBently Nevada
-
Sensor family3300 XL Proximitor Sensor
-
System length and mounting fieldX1 unresolved
-
Approval optionCSA, ATEX and IECEx
-
Modification reference145004-75
-
Compatible probe systems3300 5 mm and 3300 XL 8 mm
-
Supply without barriers-17.5 to -26 V DC
-
Supply with barriers-23 to -26 V DC
-
Maximum current12 mA
-
Output resistance50 ohm
-
Supply sensitivityLess than 2 mV/V
-
Housing materialA308 aluminum
-
Operating temperature-52 to +100 deg C
-
Storage temperature-52 to +105 deg C
-
Terminal typeSpringLoc
-
Mounting configurationsDIN rail or panel, subject to X1 confirmation
View all additional
Alternative Names
330180-X1-05 MOD:145004-75
Bently Nevada 330180-X1-05 MOD:145004-75
3300 XL 8 mm proximity transducer system Proximity signal conditioning sensor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 330180-X1-05 MOD:145004-75 proximity signal conditioning sensor
Integrate 330180-X1-05 MOD:145004-75 only within the compatible 3300 XL 8 mm proximity transducer system. The complete code must agree with the mating sensor chain, mounting arrangement and signal-conditioning hardware.
The decoded build includes a 3300 XL Proximitor Sensor with unresolved X1 length/mounting field. Preserve the documented cable and connector routing and keep the measurement chain matched to the installed monitor.
The remaining order information specifies approval code 05 and modification reference 145004-75. Apply the family electrical and environmental limits without assigning unresolved wildcard fields a value.
Features:
- Complete order-code configuration retained
- Matched sensing-chain compatibility checked
- Documented electrical limits applied
The 330180-X1-05 MOD:145004-75 proximity signal conditioning sensor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 330180-X1-05 MOD:145004-75 proximity signal conditioning sensor
Record the full 330180-X1-05 MOD:145004-75 label before removal. Compare all option positions, mechanical interfaces, connectors and approval markings with the offered replacement.
Inspect the mating connectors, cable condition and mounting hardware while the channel is isolated. Replace damaged ancillary parts only when they are listed in the quotation.
After installation, verify the expected signal, channel status and physical clearances. A matching base number alone does not confirm a compatible complete configuration.
Features:
- Full installed label captured before removal
- Mechanical and connector options compared
- Channel signal verified after installation
The 330180-X1-05 MOD:145004-75 proximity signal conditioning sensor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify the official document identity before installation
- Match every order-code position to the supplied item
- Accessories are included only when listed
Documentation for the 330180-X1-05 MOD:145004-75 proximity signal conditioning sensor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size9.9 × 6.0 × 3.6 cm
-
Net weight0.246 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330180-X1-05 MOD:145004-75
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the complete 330180-X1-05 MOD:145004-75 order identify?
It identifies a Bently Nevada Proximity signal conditioning sensor. Every suffix and any MOD reference must be retained when checking the supplied item. -
Which technical value is most important for 330180-X1-05 MOD:145004-75?
The decoded value is Sensor family: 3300 XL Proximitor Sensor. Check it together with the full order code rather than using the family name alone. -
Can 330180-X1-05 MOD:145004-75 be replaced by a similar base number?
No automatic interchangeability is established. Compare the complete ordering code, connection arrangement, system length and approval option. -
Which documentation applies to 330180-X1-05 MOD:145004-75?
Use the linked Bently Nevada family document and confirm that its ordering table includes the exact product family and option positions. -
What should be recorded before removing 330180-X1-05 MOD:145004-75?
Record the full label, installed connection arrangement, cable routing, mating parts and any hazardous-area markings before removal. -
How should 330180-X1-05 MOD:145004-75 be checked after installation?
Confirm mechanical fit, connector condition, cable routing and the expected monitored signal before returning the channel to service. -
Does the quotation for 330180-X1-05 MOD:145004-75 include accessories?
Only accessories expressly listed in the written quotation are included; request each required bracket, protector, fitting or mating part separately. -
Why must the suffixes on 330180-X1-05 MOD:145004-75 remain unchanged?
They distinguish physical and approval options that may not be visible from the base family number and can affect installation compatibility.
READY TO VERIFY YOUR PART?
Get a 330180-X1-05 MOD:145004-75 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
330180-X1-05 MOD:145004-753300 XL Proximitor SensorManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
