AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL NSV Proximity Transducer
- 129715-138-40-05-05
Require for Quote:
Need more help? You may also find the answer in our FAQ section
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 129715-138-40-05-05
-
Product Model129715-138-40-05-05
-
Product Parameters3300 XL PROBE ASSEMBLY
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size1.2x1x117cm
-
ManufacturerBently Nevada
-
Weight0.05 kg
-
Usable Range Window0.25 mm to 2.3 mm
-
Scale Factor (ISF)7.87 V/mm (200 mV/mil) ± 5%
-
Nominal Probe DC Resistance7.45 Ω ± 0.50
-
Extension Cable Capacitance69.9 pF/m typical
-
Recommended Gap Setting-9 Vdc at 1.27 mm (50 mils)
-
Frequency Response0 to 10 kHz, +0, -3 dB
Description
129715138400505
PROBE ASSEMBLY
3300 XL
FLEX
ARMORED
138 CASE LENGTH
0.5 M TOTAL LENGTH
PROBE ASSEMBLY
3300 XL
FLEX
ARMORED
138 CASE LENGTH
0.5 M TOTAL LENGTH
Information
Overview
Manuals
Technical notes
Product Applications
Sensor Gap Adjustment
Features:
- 2 mm Linear Range with 7.87 V/mm (200 mV/mil) Sensitivity
- Complete Component Interchangeability & Backward Compatibility
- Wide 0–10 kHz Frequency Response with 305 m Cable Capability
- Rugged PPS Tip & AISI 304 Stainless Steel Case
The 129715-138-40-05-05 Bently Nevada 3300 XL 8mm Proximity Probe may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 129715-138-40-05-05 3300 XL 8mm Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 129715-138-40-05-05 part number decodes as follows: 129715 designates a 3300 XL 8 mm probe with 3/8-24 UNF thread; 138 indicates a case length of 138 mm (5.43 in); 40 specifies a 4.0 meter (13.1 ft) total cable length; the first 05 identifies a miniature coaxial ClickLoc connector with connector protector and standard FEP cable; and the second 05 confirms multiple hazardous area approvals (CSA, ATEX, IECEx). This configuration is typical for installations requiring a moderately long integral cable with robust connector protection and full global regulatory compliance.
- Steam & Gas Turbines:Thermal growth & rotor vibration
- Centrifugal & Process Compressors:Shaft stability in high-pressure oil/gas & chemical
- Large Industrial Pumps:Boiler feed & water pumps: bearing friction/misalignment
- Generators & Alternators:Protects from electrical faults causing rotor imbalance
- Large Fans & Blowers:Cooling tower & induced-draft fans
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
De-energize the Loop: Disconnect all field wiring before inserting the probe into its mounting bracket.
Position the Shaft: Verify the target shaft is in its mechanical center or normal running state.
Connect a Voltmeter: Attach a digital multimeter between the OUT and COM terminals of the Proximitor sensor.Thread the Probe: Thread the probe closer to the target shaft while continuously reading the DC voltage.
FAQs
-
What is the 129715-138-040-05-05 ？
+The Bently Nevada 129715-138-040-05-05 is a specific configuration of the 3300 XL Proximitor Sensor, designed for eddy current proximity probe systems. -
What does this sensor measure?
+It measures the proximity of the probe tip to a conductive target (usually a steel shaft) using eddy currents, providing accurate data on radial vibration and axial (thrust) position. -
Can I use it with any probe?
+No, you must use a compatible Bently Nevada 3300 XL probe and extension cable system to avoid "Frankenstein" systems, which can lead to faulty data, even if they appear to work when the machine is stopped. -
What is the recommended target gap voltage for calibration?
+The quiescent gap voltage should be calibrated to -10 VDC. This places the operation inside its optimal linear output range of -2 VDC to -18 VDC.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
-
-
-
330881-28-06-155-03-02PROXPAC XL Proximity Transducer,MetricManufacturer: Bently NevadaView Details -
Product
Product Browsing History
-
-
-
-
330881-28-00-061-03-02PROXPAC XL Proximity Transducer,MetricManufacturer: Bently NevadaView Details
-
21000-16-05-00-027-04-02Aluminum body with 304 stainless steel sleeveManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN