PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
FluidLoc transducer extension cable
Bently Nevada 330854-080-24-05 is a high temperature FluidLoc extension cable with an eight meter nominal length for the 3300 XL 25 mm system. The 24 cable option is unarmored, while suffix 05 selects the manufacturer multiple approvals ordering option.
This cable forms the electrical connection in a configured turbine differential expansion transducer channel. Combine it with the correct probe and sensor length, and maintain the specified connector protection and routing. Cable construction and approvals must be checked independently; they do not establish universal system interchangeability.
This cable forms the electrical connection in a configured turbine differential expansion transducer channel. Combine it with the correct probe and sensor length, and maintain the specified connector protection and routing. Cable construction and approvals must be checked independently; they do not establish universal system interchangeability.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 330854-080-24-05 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
02 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations. -
03 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants.
Technical specifications for 330854-080-24-05
-
Product Model330854-080-24-05
-
Product ParametersFluidLoc transducer extension cable
-
In stock8 units
-
ManufacturerBently Nevada
-
Nominal cable length8.0 m
-
Cable option24: high temperature FluidLoc, without armor
-
Approval order option05: multiple approvals; check markings
-
Cable construction75-ohm triaxial cable, PFA insulated
-
Core DC resistance2.0 ohms +/-0.5 at 8.0 m
-
Jacket DC resistance0.6 ohms +/-0.2 at 8.0 m
-
Typical capacitance69.9 pF/m
-
Operating / storage temperature-35 to +200 degrees C
-
Minimum bend radius25.4 mm
-
Connector tighteningFinger tight; 0.565 N m maximum
-
Connector materialGold-plated brass and gold-plated beryllium copper
-
System length matching8.0 m cable plus compatible 1.0 m probe for 9.0 m system
View all additional
Alternative Names
330854 080 24 05
330854-080-24-05 extension cable
3300 XL 25 mm extension cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
FLUIDLOC TRANSDUCER EXTENSION CABLE
Integrating 330854-080-24-05
Bently Nevada 330854-080-24-05 is a high temperature FluidLoc extension cable with an eight meter nominal length for the 3300 XL 25 mm system. The 24 cable option is unarmored, while suffix 05 selects the manufacturer multiple approvals ordering option.
This cable forms the electrical connection in a configured turbine differential expansion transducer channel. Combine it with the correct probe and sensor length, and maintain the specified connector protection and routing. Cable construction and approvals must be checked independently; they do not establish universal system interchangeability.
For 330854-080-24-05, check the documented 3300 XL 25 mm configuration before connecting it to existing equipment. The selected order is 8.0 m; 24: high temperature FluidLoc, without armor; 05: multiple approvals; check markings. Published family performance applies only under the specified test and installation conditions.
Features:
- Verify the complete order and configuration
- Use the applicable manufacturer installation guidance
- Keep component and complete-system ratings separate
The 330854-080-24-05 extension cable requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare the full 330854-080-24-05 identity with the installed assembly and manufacturer ordering information. Do not treat a different length, mounting arrangement, cable construction or approval option as an equivalent replacement merely because the product belongs to the same family.
For the documented upgrade from earlier systems, replace the probe, extension cable and Proximitor Sensor together with 3300 XL 25 mm components. Similar output scaling can support the stated monitor compatibility, but does not permit mixing unrelated sensing components.
No exact-order hardware revision, discontinuation date or designated successor was established in the reviewed manufacturer materials. Document revision M identifies the publication, not the product hardware. Unverified lifecycle dates and replacement claims are not added.
Features:
- Match the full order before replacement
- Check system and installation conditions
- Do not infer a hardware revision from a document
The 330854-080-24-05 extension cable requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330854-080-24-05 extension cable must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20 x 19 x 2 cm
-
Shipping weight0.3 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330854-080-24-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 330854-080-24-05 armored?
No. Cable option 24 denotes high temperature FluidLoc cable; the separate 25 option is the armored version. Do not infer armor from the product family name. -
Which probe length completes the nine meter configuration?
The eight meter extension cable combines with a compatible one meter 25 mm probe for a nine meter Proximitor Sensor system. The manufacturer requires probe and cable lengths to add up to the sensor total length. -
What temperature limit applies to this cable?
The official extension cable operating and storage range is -35 to +200 degrees C. The short term 250 degree allowance stated for the probe must not be transferred to the extension cable. -
Is the cable specified with a 50 ohm output resistance?
No. It is a 75-ohm triaxial FluidLoc cable. The separate 50-ohm output resistance in the system datasheet belongs to the Proximitor Sensor, not the cable. -
How are the connectors protected during installation?
The official series description supplies connector protectors and an installation tool with each cable. Maintain the stated protection, use finger tight connector engagement, and observe the 25.4 mm minimum cable bend radius. -
Can this cable alone upgrade a 7200 differential expansion system?
No. The documented upgrade to the 3300 XL 25 mm system requires replacement of the probe, extension cable and Proximitor Sensor together. Match the whole chain rather than replacing only the cable.
READY TO VERIFY YOUR PART?
Get a 330854-080-24-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
