PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL NSV Proximity Transducer
- 330904-00-10-50-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 XL NSv standard-mount proximity probe, M8 x 1, with armor
Bently Nevada 330904-00-10-50-02-05 is an armored M8 x 1 NSv proximity probe with a 100 mm case and five-metre total length. The configuration uses standard cable and a miniature ClickLoc connector without the protector supplied under option 01.
This probe belongs to the 3300 XL NSv measurement family for small targets and restricted installation geometry. Match its electrical length to the intended NSv Proximitor, account for armored cable routing, and verify mechanical fit and approval conditions before treating it as a replacement for another sensing assembly.
This probe belongs to the 3300 XL NSv measurement family for small targets and restricted installation geometry. Match its electrical length to the intended NSv Proximitor, account for armored cable routing, and verify mechanical fit and approval conditions before treating it as a replacement for another sensing assembly.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330904-00-10-50-02-05
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · REFRIGERATION COMPRESSORS
Radial vibration in restricted bearing spaces
The NSv family is documented for refrigeration compressors and other tightly packaged machinery. This armored metric probe can form the radial sensing element after target diameter, sideview conditions and the complete electrical length are checked. -
02 · PROCESS GAS MACHINERY
Axial position on small conductive targets
NSv measurements address axial-position applications where the available conductive target is small. The five-metre probe must be paired with a suitable Proximitor configuration while maintaining the published target-gap and clearance requirements. -
03 · CENTRIFUGAL AIR SYSTEMS
Rotational phase reference measurement
In a compatible compressor-monitoring system, the NSv probe family provides phase-reference sensing under constrained geometry. Armor routing and connector protection remain separate installation checks.
Technical specifications for 330904-00-10-50-02-05
-
Product Model330904-00-10-50-02-05
-
Product ParametersArmored NSv proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting threadM8 x 1
-
Unthreaded length0 mm
-
Overall case length100 mm
-
Total probe length5.0 m
-
Cable armorArmored
-
Probe cable construction75-ohm coaxial cable with FEP insulation
-
Connector packageMiniature coaxial ClickLoc; no connector protector included
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 304 stainless steel
-
Probe temperature range-52 to +177 deg C; pressure-seal caveat below -34 deg C
-
Nominal probe DC resistance5.3 +/- 0.7 ohm, center to outer conductor
-
Probe case-to-lead tensile rating220 N maximum rated
-
Minimum cable bend radius25.4 mm
-
Approval ordering optionMultiple-approvals ordering option
View all additional
Alternative Names
330904-00-10-50-02-05 proximity probe
100 mm metric armored sensing probe
3300 XL NSv 5.0 m M8 probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL NSV
3300 XL NSv proximity measurement chain
The 330904-00-10-50-02-05 sensing assembly belongs to the 3300 XL NSv measurement chain, which is documented for restricted sideview and small-target applications. Its 100 mm case and M8 x 1 mounting must be assessed against the actual machine geometry, not another probe family's mounting assumptions.
The selected probe has 5.0 m total length. NSv channels use five- or seven-metre electrical lengths; any probe and extension-cable combination must equal the chosen NSv Proximitor length. Standard 3300 XL 8 mm system-length rules must not be substituted.
Respect the 12 mm thread-engagement limit and 25.4 mm minimum bend radius, and verify target size, probe spacing and counterbore clearance. The 02 termination needs a separate review of connector protection and the supplied approval conditions.
Features:
- Use the documented NSv probe/cable/Proximitor chain
- 12 mm maximum specified engagement
- Small-target and probe-spacing limits remain important
The Bently Nevada 330904-00-10-50-02-05 Noncontact proximity sensing probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the M8 x 1 case, 5.0 m probe length, armored construction and complete 330904-00-10-50-02-05 order before approving a substitute. Similar NSv function does not establish identical mechanical mounting or connector protection.
The manufacturer states that NSv probes and extension cables are compatible with the previous 3300 RAM probe and cable. A documented RAM upgrade may retain those components with an NSv Proximitor, whereas migration from 3000-series or 7000-series 190 equipment requires replacing probe, cable and Proximitor.
These are family-level migration conditions, not an unconditional replacement declaration for this complete ordering code. No exact hardware revision, withdrawal date or nominated successor was confirmed; check the existing channel, target calibration and certification requirements before replacing components.
Features:
- Match NSv mechanical and electrical options
- RAM and 190 upgrades have different requirements
- No exact-order drop-in successor established
The Bently Nevada 330904-00-10-50-02-05 Noncontact proximity sensing probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330904-00-10-50-02-05 Noncontact proximity sensing probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330904-00-10-50-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does 50 indicate fifty centimetres of exposed cable?
No. In the NSv ordering table, 50 specifies a five-metre total probe length. It is not a measurement of exposed lead or a metric case dimension. -
Can a five-metre NSv probe be extended arbitrarily?
No. The combined probe and extension-cable length must equal the selected NSv Proximitor total length. The documented channel lengths are five and seven metres; arbitrary additions are not an approved matching method. -
Is the mounting thread interchangeable with the armored 330910 version?
No. This 330904 base has M8 x 1 thread. The 330910 base is M10 x 1; similar NSv function does not make their mounting geometry interchangeable. -
What is the maximum engagement for the 100 mm case?
The stated M8 x 1 engagement limit is 12 mm. Case length and permissible thread engagement are different mechanical properties. -
What resistance corresponds to the five-metre NSv configuration?
The datasheet lists 5.3 +/- 0.7 ohm from the center to outer conductor for a five-metre NSv probe. This is a length-specific probe value. -
Do the armored lead and 02 termination include a connector protector?
No. The base identifies armor, whereas connector option 02 supplies standard cable and ClickLoc termination without the protector included under 01. These ordering choices are separate. -
Can NSv family suitability alone qualify an overspeed protection channel?
No. The family describes tachometer and zero-speed uses, but a complete protection function cannot be inferred from the probe alone. The target, monitoring system and applicable safety design must be verified.
READY TO VERIFY YOUR PART?
Get a 330904-00-10-50-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
