PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Proximity assembly upgrade kit
Bently Nevada 178850-00 is a proximity assembly upgrade kit. The kit provides the components for a PROXPAC XL upgrade arrangement. It includes a housing lid, a one-metre Proximitor sensor and its support table. The kit does not by itself confirm a complete probe assembly or suitability for a hazardous-area installation.
The manufacturer lists 178850-00 as the non-approved upgrade kit. The separate 178850-05 option is listed for multiple approvals. Preserve the exact kit identity and check the original housing, probe and measuring-chain arrangement before selecting an upgrade.
The manufacturer lists 178850-00 as the non-approved upgrade kit. The separate 178850-05 option is listed for multiple approvals. Preserve the exact kit identity and check the original housing, probe and measuring-chain arrangement before selecting an upgrade.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 178850-00 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. -
02 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations. -
03 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production.
Technical specifications for 178850-00
-
Product Model178850-00
-
Product ParametersProximity assembly upgrade kit
-
In stock5 units
-
ManufacturerBently Nevada
-
Kit rolePROXPAC XL upgrade kit
-
Approval selectionNon-approved
-
Included componentsHousing lid, 1-metre Proximitor sensor and support table
-
Related operation manual178761
View all additional
Alternative Names
178850 00
178850-00 proximity assembly upgrade kit
Bently Nevada 178850-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
PROXIMITY ASSEMBLY UPGRADE KIT
Integrating 178850-00
The kit provides the components for a PROXPAC XL upgrade arrangement. It includes a housing lid, a one-metre Proximitor sensor and its support table. The kit does not by itself confirm a complete probe assembly or suitability for a hazardous-area installation.
Use the kit only within the documented PROXPAC XL upgrade arrangement. The original housing and installed probe system must be checked. A kit listing is not evidence that every original housing configuration or approval can be retained unchanged.
Follow operation manual 178761 and verify the existing assembly before replacing the lid and sensor-support components. Match the complete probe system and required environmental approval. Do not present the non-approved kit as the multi-approval version.
Features:
- Match monitor generation, matched front and rear assemblies, wiring and software
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 178850-00 proximity assembly upgrade kit requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 178850-00 requires comparing monitor generation, matched front and rear assemblies, wiring and software. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the kit only within the documented PROXPAC XL upgrade arrangement. The original housing and installed probe system must be checked. A kit listing is not evidence that every original housing configuration or approval can be retained unchanged.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 178850-00 proximity assembly upgrade kit requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 178850-00 proximity assembly upgrade kit must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.5x2.5x7.2cm
-
Shipping weight0.16 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 178850-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 178850-00 identified?
The manufacturer lists 178850-00 as the non-approved upgrade kit. The separate 178850-05 option is listed for multiple approvals. Preserve the exact kit identity and check the original housing, probe and measuring-chain arrangement before selecting an upgrade. -
What is the function of this component?
The kit provides the components for a PROXPAC XL upgrade arrangement. It includes a housing lid, a one-metre Proximitor sensor and its support table. The kit does not by itself confirm a complete probe assembly or suitability for a hazardous-area installation. -
Which installed equipment must be matched?
Use the kit only within the documented PROXPAC XL upgrade arrangement. The original housing and installed probe system must be checked. A kit listing is not evidence that every original housing configuration or approval can be retained unchanged. -
Where is this component used?
The kit supplies a housing lid, Proximitor sensor and support table for the specified upgrade arrangement. Confirm the installed PROXPAC assembly before use. -
What must be checked during installation?
Follow operation manual 178761 and verify the existing assembly before replacing the lid and sensor-support components. Match the complete probe system and required environmental approval. Do not present the non-approved kit as the multi-approval version. -
Does this kit include a complete replacement probe assembly?
The listed contents are the housing lid, 1-metre Proximitor sensor and support table. A complete probe assembly is not established by that contents list. -
Is 178850-00 the multiple-approval kit?
No. The manufacturer identifies 178850-00 as non-approved and separately lists 178850-05 as the multiple-approval kit.
READY TO VERIFY YOUR PART?
Get a 178850-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
