PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL Proximity Transducer
- 330876-01-90-00-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Large diameter proximity probe
Bently Nevada 330876-01-90-00-00 is a proximity probe. The probe measures conductive-target movement without contact when connected to its matching extension cable and Proximitor Sensor. The documented system serves turbine expansion measurements. Mechanical mounting, target geometry and calibrated electrical length determine whether the assembly suits the installed machine.
The total probe lead length is 9 m. Match the full ordering code, mounting arrangement and calibrated probe-system length with the installed equipment. Unresolved suffixes or factory modifications must be confirmed before substitution. Probe, cable and sensor temperature ratings are different.
The total probe lead length is 9 m. Match the full ordering code, mounting arrangement and calibrated probe-system length with the installed equipment. Unresolved suffixes or factory modifications must be confirmed before substitution. Probe, cable and sensor temperature ratings are different.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 50 mm transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · TURBINE EXPANSION
Same-side collar measurements
The manufacturer documents two transducers observing the same side of a turbine collar. The matched 3300 XL 50 mm transducer system chain measures collar movement relative to the casing within the specified system range. -
02 · COMPLEMENTARY INPUTS
Opposite-side collar measurements
Two transducers on opposite sides of the collar can extend the differential-expansion measurement range. The complete matching chain and the monitor input configuration must support the complementary arrangement. -
03 · ROTOR EXPANSION
Large turbine rotor movement
The manufacturer identifies rotor expansion of large steam turbine generators as a system application. Select the available target size and expected rotor axial movement before deciding the mounting method.
Technical specifications for 330876-01-90-00-00
-
Product Model330876-01-90-00-00
-
Product ParametersLarge diameter proximity probe
-
In stock8 units
-
ManufacturerBently Nevada
-
Case configuration1/2-20 thread, straight exit
-
Total probe length9 m
-
Armor selectionNo armor
-
Agency approval optionNo approvals requested
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Case materialAISI 304 stainless steel
-
Probe cable construction75 ohm triaxial FluidLoc
-
Cable insulationPerfluoroalkoxyethylene (PFA)
-
Probe continuous temperature range-35 to +200 deg C
-
Probe short-term temperature+250 deg C for less than 24 hours
-
Minimum cable bend radius25.4 mm
-
Maximum rated case torque45 N m
View all additional
Alternative Names
330876-01-90-00-00 proximity probe
Bently Nevada 330876-01-90-00-00
330876 01 90 00 00 proximity probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
LARGE DIAMETER PROXIMITY PROBE
Integrating 330876-01-90-00-00
The probe measures conductive-target movement without contact when connected to its matching extension cable and Proximitor Sensor. The documented system serves turbine expansion measurements. Mechanical mounting, target geometry and calibrated electrical length determine whether the assembly suits the installed machine.
Use the matching 3300 XL 50 mm transducer system probe, extension cable and Proximitor Sensor. Their electrical lengths must form the selected five-metre or nine-metre system. A five-metre probe is designed for the five-metre Proximitor Sensor only.
Select the documented case mounting and position the probe for the actual collar or target. Verify and gap the complete sensing system using the manufacturer procedure. The probe is not pressure-tested before shipment; the installation must safely contain any potential leakage.
Features:
- Match complete ordering options, sensing-chain configuration, mounting and target arrangement
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330876-01-90-00-00 proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330876-01-90-00-00 requires comparing complete ordering options, sensing-chain configuration, mounting and target arrangement. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
An upgrade from 7200 50 mm or 50 mm DE Integral systems requires replacement of the probe, extension cable and Proximitor Sensor with matching 3300 XL 50 mm transducer system components. The documented output scale permits an upgrade without monitor-configuration changes, but this is not a claim that an individual component is interchangeable.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330876-01-90-00-00 proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330876-01-90-00-00 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size22x22x6.5cm
-
Shipping weight0.75 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330876-01-90-00-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is 330876-01-90-00-00 used for?
The probe measures conductive-target movement without contact when connected to its matching extension cable and Proximitor Sensor. The documented system serves turbine expansion measurements. Mechanical mounting, target geometry and calibrated electrical length determine whether the assembly suits the installed machine. -
How should the complete ordering configuration be checked?
The total probe lead length is 9 m. Match the full ordering code, mounting arrangement and calibrated probe-system length with the installed equipment. Unresolved suffixes or factory modifications must be confirmed before substitution. Probe, cable and sensor temperature ratings are different. -
Which probe, cable and conditioner combinations are compatible?
Use the matching 3300 XL 50 mm transducer system probe, extension cable and Proximitor Sensor. Their electrical lengths must form the selected five-metre or nine-metre system. A five-metre probe is designed for the five-metre Proximitor Sensor only. -
What turbine measurement arrangements are documented?
Two transducers on opposite sides of the collar can extend the differential-expansion measurement range. The complete matching chain and the monitor input configuration must support the complementary arrangement. -
Which installation checks are important?
Select the documented case mounting and position the probe for the actual collar or target. Verify and gap the complete sensing system using the manufacturer procedure. The probe is not pressure-tested before shipment; the installation must safely contain any potential leakage. -
Can an older transducer system be upgraded one component at a time?
An upgrade from 7200 50 mm or 50 mm DE Integral systems requires replacement of the probe, extension cable and Proximitor Sensor with matching 3300 XL 50 mm transducer system components. The documented output scale permits an upgrade without monitor-configuration changes, but this is not a claim that an individual component is interchangeable. -
Does the +250 deg C probe allowance apply to the whole system?
No. It is a short-term probe allowance of less than 24 hours. Cable and Proximitor Sensor limits are separate, and the published accuracy limits depend on the temperatures of the individual sensing-chain components.
READY TO VERIFY YOUR PART?
Get a 330876-01-90-00-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
