PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL Proximity Transducer
- 330876-02-50-01-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Differential expansion proximity probe
Bently Nevada 330876-02-50-01-00 is a differential-expansion probe. It is the probe element in a matched differential-expansion measuring system. The complete sensing chain observes conductive-target movement relative to the machine casing; probe geometry, total electrical length and signal-conditioner calibration must be selected for the actual turbine installation.
The order selects the stated probe geometry, lead length and cable construction. Confirm the mounting arrangement and target clearance against the supplied assembly. The probe is only one system element and cannot establish measurement range or monitoring compatibility independently.
The order selects the stated probe geometry, lead length and cable construction. Confirm the mounting arrangement and target clearance against the supplied assembly. The probe is only one system element and cannot establish measurement range or monitoring compatibility independently.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 50 mm
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · TURBINE COLLARS
Same-side differential-expansion measurements
Two matched sensing channels can observe the same collar side when target size and expected rotor movement fit the documented range. Preserve the ordered mounting and connection options. -
02 · COMPLEMENTARY CHANNELS
Opposite-side collar measurements
The manufacturer describes complementary transducers observing opposite collar sides to extend the differential-expansion arrangement. Confirm the complete sensor-to-monitor configuration before commissioning. -
03 · ROTOR MOVEMENT
Steam-turbine expansion monitoring
The sensing chain observes rotor movement relative to the machine casing; select the target geometry and monitoring configuration for the expected thermal growth. Check the installation limits rather than selecting by appearance alone.
Technical specifications for 330876-02-50-01-00
-
Product Model330876-02-50-01-00
-
Product ParametersDifferential expansion proximity probe
-
In stock6 units
-
ManufacturerBently Nevada
-
Mounting threadM14 x 1.5
-
Probe lead length5.0 m
-
ArmorWith armor
-
Approval optionNo approvals requested
-
Cable selectionHigh-temperature FluidLoc
-
Probe case materialAISI 304 stainless steel
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Cable construction75 ohm triaxial with PFA insulation
-
Minimum bend radius25.4 mm
-
Maximum case torque45 N m
-
Maximum thread engagement21 mm
-
Operating probe temperature-35 to +200 deg C
-
Short-term probe allowanceUp to +250 deg C for less than 24 hours
View all additional
Alternative Names
330876 02 50 01 00
330876-02-50-01-00 differential-expansion probe
Bently Nevada 330876-02-50-01-00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
DIFFERENTIAL EXPANSION PROXIMITY PROBE
Integrating 330876-02-50-01-00
It is the probe element in a matched differential-expansion measuring system. The complete sensing chain observes conductive-target movement relative to the machine casing; probe geometry, total electrical length and signal-conditioner calibration must be selected for the actual turbine installation.
A replacement or upgrade requires the matching probe, extension cable and Proximitor Sensor family. Published compatibility with a monitor does not permit mixing different sensing families or ignoring the total electrical length.
Protect connectors, preserve cable bend radius and install the target geometry specified for the measurement. Do not apply a short-term probe temperature allowance to the extension cable or remote sensor.
Features:
- Match the complete ordering identity, mounting interface, electrical connections and operating limits
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330876-02-50-01-00 differential-expansion probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330876-02-50-01-00 requires comparing the complete ordering identity, mounting interface, electrical connections and operating limits. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
A replacement or upgrade requires the matching probe, extension cable and Proximitor Sensor family. Published compatibility with a monitor does not permit mixing different sensing families or ignoring the total electrical length.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330876-02-50-01-00 differential-expansion probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330876-02-50-01-00 differential-expansion probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size22x22x6.5cm
-
Shipping weight0.75 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330876-02-50-01-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented identity of 330876-02-50-01-00?
The order selects the stated probe geometry, lead length and cable construction. Confirm the mounting arrangement and target clearance against the supplied assembly. The probe is only one system element and cannot establish measurement range or monitoring compatibility independently. -
What function does this differential-expansion probe perform?
It is the probe element in a matched differential-expansion measuring system. The complete sensing chain observes conductive-target movement relative to the machine casing; probe geometry, total electrical length and signal-conditioner calibration must be selected for the actual turbine installation. -
What must be matched when connecting this 330876?
A replacement or upgrade requires the matching probe, extension cable and Proximitor Sensor family. Published compatibility with a monitor does not permit mixing different sensing families or ignoring the total electrical length. -
Which documented application is relevant to this configuration?
Two matched sensing channels can observe the same collar side when target size and expected rotor movement fit the documented range. -
What must the installer check before commissioning?
Protect connectors, preserve cable bend radius and install the target geometry specified for the measurement. Do not apply a short-term probe temperature allowance to the extension cable or remote sensor. -
What is the specified probe case material?
AISI 304 stainless steel. This value belongs to the documented product or family scope; unresolved ordering fields are not inferred. -
Are all suffixes, revisions and replacements confirmed?
The listed ordering options are supported by the referenced table. Product hardware revisions, discontinuation dates and designated successors require separate manufacturer confirmation; a document revision does not establish a product revision.
READY TO VERIFY YOUR PART?
Get a 330876-02-50-01-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
