AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Saturday, July 18
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 43501-01-04-01
-
Product Model43501-01-04-01
-
Product ParametersLow-pressure Cable Seal
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size28x28x2.5cm
-
ManufacturerBently Nevada
-
Weight0.4 kg
-
High Pressure Side Thread Size1/2-14 NPT
-
Cable Grommet and WasherGrommet will accommodate upto 4 cables. One hole is punchedand three are partially predrilled.
-
Low Pressure Side Thread Size1/2-14 NPT
Description
The 43501 Low Pressure Cable Seal provides ameans to pass through a single hole in amachine case or other barrier one to four 95-ohm transducer cables or one to two 25mm DEand 50mm DE transducer cables. A moldedsilicone rubber grommet provides a seal toprevent leakage of fluids along the outer jacketof the cable(s). The seal mounts in a holetapped with either ½-NPT or ¾-NPT pipe threadsin the machine and has external pipe threadson both ends to mate to the tapped hole and tomating conduit or housings.
The seal is rated to 345 kPa (50 psi) acrossgrommet high pressure to low pressure. Theseal is rated only on the cable outer jacket andseal body itself. It does not seal leaks throughthe cable braid or center conductor due topinholes or cuts in the cable jacket or throughthe probe or connector. The primary intendedusage is to seal lube oil to exit bearing housingsand machine cases.
The seal is rated to 1.0 psi absolute, but islimited in practice by the cable, probe, andconnector as with pressure.
The seal is rated to 345 kPa (50 psi) acrossgrommet high pressure to low pressure. Theseal is rated only on the cable outer jacket andseal body itself. It does not seal leaks throughthe cable braid or center conductor due topinholes or cuts in the cable jacket or throughthe probe or connector. The primary intendedusage is to seal lube oil to exit bearing housingsand machine cases.
The seal is rated to 1.0 psi absolute, but islimited in practice by the cable, probe, andconnector as with pressure.
Alternative Names
43501-01-04-0I
43501-01-04-O1
43501-01-O4-01
43501-0I-04-01
43501-O1-04-01
4350I-01-04-01
435O1-01-04-01
43501 01 04 01
43501 01 04 0I
43501 01 04 O1
43501 01 O4 01
43501 0I 04 01
43501 O1 04 01
4350I 01 04 01
435O1 01 04 01
43501-01-04-02
Information
Overview
Manuals
Application Notes
Product Applications
Cable Insertion Steps
Features:
- Passes One to Four Transducer Cables Through a Single Machine Case Hole
- Molded Silicone Rubber Grommet for Fluid Sealing
- Rated to 345 kPa (50 psi) Across Grommet
- Mounts in 1/2-NPT or 3/4-NPT Tapped Holes with External Pipe Threads on Both Ends
The 43501-01-04-01 incorporates a molded silicone rubber grommet that provides a seal to prevent leakage of fluids along the outer jacket of the cable(s). This grommet design of the 43501-01-04-01 ensures that lubricating oils and other process fluids are contained within the machine case, preventing environmental contamination and maintaining proper equipment lubrication.
The 43501-01-04-01 is rated to 345 kPa (50 psi) across the grommet from high pressure to low pressure. The 43501-01-04-01 is also rated to 1.0 psi absolute, but is limited in practice by the cable, probe, and connector as with all seals. This pressure rating of the 43501-01-04-01 makes it suitable for typical bearing housing and machine case applications where moderate pressure differentials exist.
The 43501-01-04-01 Bently Nevada Low Pressure Cable Seal may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 43501-01-04-01 Low Pressure Cable Seal Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The 43501-01-04-01 features a molded silicone rubber grommet that provides a seal to prevent leakage of fluids along the outer jacket of the cable(s). The seal mounts in a hole tapped with 1/2-14 NPT pipe threads in the machine and has external 1/2-14 NPT pipe threads on both ends to mate to the tapped hole and to mating conduit or housings.
The 43501-01-04-01 is rated to 345 kPa (50 psi) differential pressure from the grommet high-pressure side to the low-pressure side. The seal rating of the 43501-01-04-01 applies only to the cable outer jacket and seal body itself. It does not seal leaks through the cable braid or center conductor due to pinholes or cuts in the cable jacket, or through the probe or connector. The primary intended usage of the 43501-01-04-01 is to seal lube oil to exit bearing housings and machine cases.
- Oil & Gas: Monitors compressors, pumps, and gas turbines
- Power Generation: Tracks vibration in steam and hydroelectric turbines
- Industrial Manufacturing: Protects rotating equipment in paper, mining, and water treatment
- Radial Vibration: Monitors bearings, detects rotor imbalance or shaft misalignment
- Axial Thrust: Measures rotor displacement to determine thrust bearing wear
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Prepare the Seal: Unscrew the low-pressure (back) nut from the cable seal assembly.
Configure the Grommet: The grommet comes with one pre-punched hole and three partially pre-drilled holes. Use an awl or punch to open only the number of holes required for your specific number of cables.
Insert Cables: Thread your transducer cables through the low-pressure nut, followed by the rubber grommet, and finally through the main body of the cable seal. Leave enough slack inside the machine case to make the necessary sensor connections.Positioning: Ensure the grommet is seated correctly in the seal body before tightening.
Technical notes
The primary intended usage of the 43501-01-04-01 is to seal lube oil to exit bearing housings and machine cases. The 43501-01-04-01 is rated only on the cable outer jacket and seal body itself; it does not seal leaks through the cable braid or center conductor due to pinholes or cuts in the cable jacket or through the probe or connector. Users of the 43501-01-04-01 should ensure that cable jackets are intact and free from damage prior to installation.
FAQs
-
What is the 43501-01-04-01?
+The Bently Nevada 43501-01-04-01 is a Low Pressure Cable Seal designed to allow transducer cables to exit machine cases or bearing housings while preventing lube oil and fluid leaks. -
What cables are compatible with this seal?
+It accommodates one to four 75 Ω or 95 Ω (3300 and 7200 series) transducer cables, or one to two 25mm and 50mm DE transducer cables -
Will this prevent all leaks from the machine case?
+It only seals the outer jacket of the cable. It will not stop leaks that travel through the cable's center conductor or braid (e.g., if the cable is cut, pierced, or the connector itself leaks). -
How is the seal mounted?
+The seal mounts into a hole tapped with 1/2-NPT pipe threads in the machine and has external pipe threads on both ends to connect with standard conduits or housings.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
-
330903-17-19-05-02-003300 NSv Probe, M8X1 thread,without armorManufacturer: Bently NevadaView Details -
-
-
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN