PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
16925-30 Shielded accelerometer cable
Bently Nevada 16925-30 is a Shielded accelerometer cable for the 330400 and 330425 accelerometer system.
Route the flexible 16925-30 cable between the 330400 or 330425 sensor and the monitoring termination without exceeding the documented bend and support practices. Keep the three conductors and shield continuous so the sensor bias and dynamic acceleration signal reach the monitoring channel without avoidable noise pickup. Confirm the exact article, installed interfaces and controlled commissioning record before ordering.
Route the flexible 16925-30 cable between the 330400 or 330425 sensor and the monitoring termination without exceeding the documented bend and support practices. Keep the three conductors and shield continuous so the sensor bias and dynamic acceleration signal reach the monitoring channel without avoidable noise pickup. Confirm the exact article, installed interfaces and controlled commissioning record before ordering.
BEFORE YOU BUY
Confirm the complete Shielded accelerometer cable
ACTUAL APPLICATIONS
Where 16925-30 Fits Across Major Industry Sectors
Uses span power, paper and metals, subject to verified compatibility, operating conditions and project requirements.
- 01 · POWER GENERATION
Electricity Production Across Thermal and Hydroelectric Power Industries
Thermal electricity generation for regional power and utility markets.Hydroelectric energy production supporting renewable electricity supply and distribution. - 02 · PULP & PAPER
Paper Pulp Manufacturing and Commercial Paper Production
Pulp production and fiber processing for paper manufacturing operations.Paper manufacturing for printing, communication and commercial packaging markets. - 03 · METALS & STEEL
Primary Steel Production and Rolled Metal Manufacturing
Primary steel production serving construction and industrial manufacturing markets.Metal rolling and forming for industrial material supply chains.
Technical specifications for 16925-30
-
Product Model16925-30
-
Product ParametersShielded accelerometer cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Cable Part Number16925-30
-
Cable Construction3-conductor shielded 22 AWG cable
-
Conductor Size22 AWG (0.5 mm²)
-
Ordered Length30 ft (9.14 m)
-
Sensor-End Termination3-socket plug
-
Field-End TerminationIndividual terminal lugs
-
Minimum Order Length2 ft (0.6 m)
-
Maximum Order Length99 ft (30 m)
-
Supported Transducers330400 and 330425 accelerometers
-
Sensor Supply Reference-24 ±0.5 V DC
-
Nominal Bias Current2 mA
-
Output Bias Reference-8.5 ±0.5 V DC
-
System Cable Limit305 m (1000 ft)
-
Sensor GroundingCase isolated
-
Commissioning CheckVerify continuity, shield and signal polarity
View all additional
Alternative Names
16925 30
16925-30 3-conductor shielded 22 AWG cable
Bently Nevada Shielded accelerometer cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 16925-30 to the installed 330400 and 330425 accelerometer system
Bently Nevada 16925-30 is a Shielded accelerometer cable documented for the 330400 and 330425 accelerometer system. Route the flexible 16925-30 cable between the 330400 or 330425 sensor and the monitoring termination without exceeding the documented bend and support practices.
Keep the three conductors and shield continuous so the sensor bias and dynamic acceleration signal reach the monitoring channel without avoidable noise pickup. Confirm 30 ft (9.14 m), 3-socket plug, mechanical location and the approved system configuration before connection.
Identify each lug against the controlled drawing, check continuity and insulation, then verify sensor bias and a stable casing-vibration reading before service. Use qualified personnel, retain the official manufacturer instructions at the work location and save the final commissioning results with the equipment record.
Features:
- Exact identity: 16925-30
- Product class: Shielded accelerometer cable
- Family: 330400 and 330425 accelerometer system
The Bently Nevada 16925-30 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 16925-30 configuration before exchange
Replace 16925-30 only after matching the full product identity, 30 ft (9.14 m), 3-socket plug and installed system role. A similar family name or partial article number does not establish direct interchangeability.
Photograph the module label, rack or control-unit position, every connector, cable route, shield, earth point and companion module before removal. Compare the documented electrical and communication limits against the saved project or rack configuration.
After installation, restore the controlled configuration and complete the model-specific checks described in the official manufacturer document. Record status indications, diagnostics, signal or communication results and the final acceptance evidence before release.
Features:
- Match exact 16925-30 identity
- Confirm 3-socket plug
- Record -24 ±0.5 V DC
The Bently Nevada 16925-30 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Technical values prepared for 16925-30
- Bently Nevada manufacturer pages attached
- Exact identity required before installation
Documentation for Bently Nevada 16925-30 must match the installed system and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544429090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 16925-30
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 16925-30 the unarmored 30-foot accelerometer cable?
Yes. It is a 30 ft (9.14 m) 16925 shielded 22 AWG cable with a 3-socket plug at one end and terminal lugs at the other. -
Which Bently Nevada sensors use the 16925 cable family?
The official 330400 and 330425 accelerometer datasheet lists 16925 interconnect cables for those acceleration transducers. -
What should a buyer specify for a 16925-30 quotation?
State 16925-30, 30 ft length, non-armored construction, required quantity, destination, sensor model and whether any mating hardware is needed. -
How should the shield be handled when replacing this cable?
Reproduce the approved termination shown on the site drawing, maintain shield continuity and avoid creating an unintended ground loop in the case-isolated sensor circuit. -
Can a damaged 16925-30 be shortened or spliced during maintenance?
Use a complete documented assembly for a controlled monitoring circuit; any repair or altered length must be approved and revalidated for continuity and signal quality. -
What routing conditions should be checked on the 9.14 m run?
Inspect supports, bends, abrasion points, heat exposure, separation from power wiring and strain at the sensor plug and terminal lugs. -
Which electrical values help confirm a live accelerometer circuit?
For the associated sensor system, check the -24 ±0.5 V DC supply, nominal 2 mA bias current and approximately -8.5 ±0.5 V DC output bias. -
What commissioning record is useful to distributors and maintenance teams?
Retain the exact cable identity, measured continuity, insulation and shield results, terminal schedule, sensor bias and a stable vibration-signal check.
READY TO VERIFY YOUR PART?
Get a 16925-30 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
16925-30Shielded accelerometer cableManufacturer: Bently NevadaView Details
-
16710-25Armored sensor interconnect cableManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
