PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
VGA display interface module
Bently Nevada 190214-01 is a VGA display I/O module associated with the 3500/94M display system. The rear I/O supplies the documented video and touch-controller connection for a compatible VGA display module. It is not the display screen itself. Normal and power-only I/O versions serve different mounting and power arrangements.
The official spare table identifies 190214-01 as the normal I/O module for 3500/94M. The part does not include a confirmed touch screen, router box or KVM extension. Verify those separately selected components and the installed rack interface.
The official spare table identifies 190214-01 as the normal I/O module for 3500/94M. The part does not include a confirmed touch screen, router box or KVM extension. Verify those separately selected components and the installed rack interface.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500/94M display system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · LOCAL STATUS
Machine-train data at the rack
System and alarm event lists, channel measurements and status can be organised on configured screens. This provides operator access to existing monitoring data rather than a new measurement input. -
02 · MULTIPLE RACKS
Shared display with an optional router
A supported router box allows selection among up to four racks. Every rack still requires its own VGA module and associated I/O, with the documented cable-distance limit. -
03 · REMOTE DISPLAY
Extended viewing with supported hardware
A suitable fiber KVM extension permits remote viewing beyond standard VGA cable distance. Its components are not automatically approved for hazardous locations and require the stated installation conditions.
Technical specifications for 190214-01
-
Product Model190214-01
-
Product ParametersVGA display interface module
-
In stock5 units
-
ManufacturerBently Nevada
-
Paired front module184826-01, 3500/94M
-
I/O selectionNormal I/O, not power-only I/O
-
Video interfaceVGA analog RGB and synchronization
-
Touch-controller interfaceRS232
-
Rack allocationOne full-height rear slot
-
Separate front-mount power-only alternative190214-02; not the same I/O arrangement
View all additional
Alternative Names
190214 01
190214-01 VGA display I/O module
Bently Nevada 190214-01
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
VGA DISPLAY INTERFACE MODULE
Integrating 190214-01
The rear I/O supplies the documented video and touch-controller connection for a compatible VGA display module. It is not the display screen itself. Normal and power-only I/O versions serve different mounting and power arrangements.
The 3500/94M requires a 3500/22 TDI, firmware 1.71 or newer, and the specified display-module and rack software versions. The source lists supported display models; a VGA connector alone does not establish driver, power or hazardous-area compatibility.
Follow manual 122M3218 and select the correct front or rear cable arrangement. The touch display requires its own power supply. Disconnect only with power removed or the area known to be nonhazardous. KVM transmitter and receiver require a safe area or approved enclosure.
Features:
- Match monitor generation, matched front and rear assemblies, wiring and software
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 190214-01 VGA display I/O module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 190214-01 requires comparing monitor generation, matched front and rear assemblies, wiring and software. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The 3500/94M requires a 3500/22 TDI, firmware 1.71 or newer, and the specified display-module and rack software versions. The source lists supported display models; a VGA connector alone does not establish driver, power or hazardous-area compatibility.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 190214-01 VGA display I/O module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 190214-01 VGA display I/O module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.4x11x24.1cm
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 190214-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 190214-01 identified?
The official spare table identifies 190214-01 as the normal I/O module for 3500/94M. The part does not include a confirmed touch screen, router box or KVM extension. Verify those separately selected components and the installed rack interface. -
What is the function of this component?
The rear I/O supplies the documented video and touch-controller connection for a compatible VGA display module. It is not the display screen itself. Normal and power-only I/O versions serve different mounting and power arrangements. -
Which installed equipment must be matched?
The 3500/94M requires a 3500/22 TDI, firmware 1.71 or newer, and the specified display-module and rack software versions. The source lists supported display models; a VGA connector alone does not establish driver, power or hazardous-area compatibility. -
Where is this component used?
System and alarm event lists, channel measurements and status can be organised on configured screens. This provides operator access to existing monitoring data rather than a new measurement input. -
What must be checked during installation?
Follow manual 122M3218 and select the correct front or rear cable arrangement. The touch display requires its own power supply. Disconnect only with power removed or the area known to be nonhazardous. KVM transmitter and receiver require a safe area or approved enclosure. -
Can a router replace the VGA module in other racks?
No. Each rack requires its own 3500/94M module and I/O. The optional router shares the display, not the rack-side processing hardware. -
Does the 6 m cable limit also define the maximum KVM distance?
No. Standard VGA cables are limited to 6 m. The supported single-mode fiber KVM arrangement can extend the display up to 10 km under its documented installation conditions; it is separately selected hardware.
READY TO VERIFY YOUR PART?
Get a 190214-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
