PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Legacy rack communication interface
Bently Nevada 3500/90 is a legacy communication interface. The manufacturer identifies this legacy communication interface when explaining the later gateway. The comparison highlights a change in Modbus register handling. It supports integration planning, but does not establish the older module electrical ratings, supplied ports or a drop-in replacement.
The 3500/92 reference explicitly discusses the original 3500/90 and its primary-value Modbus registers. It describes a different configurable register utility in the later gateway. No exact legacy hardware revision, discontinuation date or unconditional replacement approval is assigned here.
The 3500/92 reference explicitly discusses the original 3500/90 and its primary-value Modbus registers. It describes a different configurable register utility in the later gateway. No exact legacy hardware revision, discontinuation date or unconditional replacement approval is assigned here.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3500 communication system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · LEGACY DATA LINKS
Maintaining an existing rack interface
Retain the documented legacy register expectations when assessing a connected monitoring-data interface. -
02 · HOST MAPPING
Reviewing primary-value register use
Applications relying on the original primary-value Modbus registers require particular review when considering a later gateway. -
03 · GATEWAY MIGRATION
Planning a changed register arrangement
The later utility can provide corresponding mapping functionality. Test the host map and configuration rather than claiming an automatic drop-in replacement.
Technical specifications for 3500/90
-
Product Model3500/90
-
Product ParametersLegacy rack communication interface
-
In stock7 units
-
ManufacturerBently Nevada
-
Documented legacy identityOriginal 3500/90 communication interface
-
Legacy mapping featurePrimary-value Modbus registers
-
Later comparison family3500/92; replacement configuration requires review
-
Later mapping mechanism3500/92 Configurable Modbus Register Utility
View all additional
Alternative Names
3500/90
3500/90 legacy communication interface
Bently Nevada 3500/90
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
LEGACY RACK COMMUNICATION INTERFACE
Integrating 3500/90
The manufacturer identifies 3500/90 as the original communication interface in its 3500/92 comparison.
The later gateway is described as supporting original communication interfaces, protocols and features except the primary-value Modbus registers. This statement is not a verified port or electrical specification for the older item.
Before considering a later gateway, compare the installed register map and connected host application. The manufacturer identifies a configurable Modbus-register utility for equivalent mapping functionality, not an assurance that the original map can remain unchanged.
Features:
- Match legacy module identity, existing host register map and proposed gateway configuration
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 3500/90 legacy communication interface requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 3500/90 requires comparing legacy module identity, existing host register map and proposed gateway configuration. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The 3500/92 reference describes retained communication functionality with a primary-value register exception. Its configurable register utility can provide corresponding functionality. No unconditional mechanical, electrical or software drop-in claim is made.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 3500/90 legacy communication interface requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 3500/90 legacy communication interface must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.6x25.3x24cm
-
Shipping weight0.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3500/90
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is officially confirmed about 3500/90?
The 3500/92 reference explicitly discusses the original 3500/90 and its primary-value Modbus registers. It describes a different configurable register utility in the later gateway. No exact legacy hardware revision, discontinuation date or unconditional replacement approval is assigned here. -
What role does the legacy interface serve?
The manufacturer identifies 3500/90 as the original communication interface in its 3500/92 comparison. -
Is 3500/92 an unconditional drop-in replacement?
The 3500/92 reference describes retained communication functionality with a primary-value register exception. Its configurable register utility can provide corresponding functionality. No unconditional mechanical, electrical or software drop-in claim is made. -
Which application needs special migration attention?
Applications relying on the original primary-value Modbus registers require particular review when considering a later gateway. -
What must be checked before a gateway change?
Before considering a later gateway, compare the installed register map and connected host application. The manufacturer identifies a configurable Modbus-register utility for equivalent mapping functionality, not an assurance that the original map can remain unchanged. -
Can the later 3500/92 port and power specifications be assigned to 3500/90?
No. The cited comparison does not establish the older module physical interfaces or electrical ratings. Use the exact legacy documentation before wiring or replacement.
READY TO VERIFY YOUR PART?
Get a 3500/90 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
