PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 7200 Proximity Transducer Systems
- 21504-000-016-10-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Legacy eight millimeter probe
Bently Nevada 21504-000-016-10-02 is a proximity probe. The probe senses conductive-target position using the eddy-current principle. Its integral coaxial lead connects into a matched 7200 measuring chain for shaft vibration or position monitoring. Probe geometry, electrical length and the correct Proximitor must be selected together.
The 21504-000-016-10-02 base identifies a 8 mm standard-mount probe with 3/8-24 threads. The total integral lead is 1 m. Compare the complete supplied code with the historical ordering table; unidentified fields are not assigned nominal dimensions or additional approvals.
The 21504-000-016-10-02 base identifies a 8 mm standard-mount probe with 3/8-24 threads. The total integral lead is 1 m. Compare the complete supplied code with the historical ordering table; unidentified fields are not assigned nominal dimensions or additional approvals.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 7200 5 mm and 8 mm proximity transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · SHAFT VIBRATION
Rotating machinery radial vibration
The historical manufacturer catalogue describes radial-vibration measurements on rotating machinery. The complete compatible sensing chain measures shaft movement relative to the mounted probe. -
02 · AXIAL POSITION
Thrust position measurement
The manufacturer lists axial thrust position as a 7200 system application. Probe mounting, target geometry and the calibrated chain must suit the configured thrust-monitoring channel. -
03 · ROTOR DIAGNOSTICS
Eccentricity and phase-related signals
The documented system supports eccentricity and vibration amplitude/phase measurements. Suitable monitoring or diagnostic equipment is still required to interpret these signals; the component is not a standalone diagnostic instrument.
Technical specifications for 21504-000-016-10-02
-
Product Model21504-000-016-10-02
-
Product ParametersLegacy eight millimeter probe
-
In stock8 units
-
ManufacturerBently Nevada
-
Probe tip diameter8 mm
-
Case thread3/8-24
-
Mounting typeStandard forward mount
-
Lead armorWithout armor
-
Probe tip constructionPolyphenylene sulfide (PPS)
-
Integral cable structure95 ohm coaxial cable
-
Probe operating temperature-34 to +177 deg C
-
Maximum relative humidity95%, noncondensing
-
Total integral lead length1 m
-
Selected connectorMiniature male coaxial
View all additional
Alternative Names
21504 000 016 10 02
21504-000-016-10-02 proximity probe
Bently Nevada 21504-000-016-10-02
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
LEGACY EIGHT MILLIMETER PROBE
Integrating 21504-000-016-10-02
The probe senses conductive-target position using the eddy-current principle. Its integral coaxial lead connects into a matched 7200 measuring chain for shaft vibration or position monitoring. Probe geometry, electrical length and the correct Proximitor must be selected together.
Use the documented 7200 5 mm or 8 mm probe, extension and Proximitor combination. The complete probe-to-Proximitor chain must match its five-metre or nine-metre calibration. The catalogue does not establish interchangeability with a 3300 XL or NSv component.
Use the ordered case thread and mounting arrangement. Set the gap using the applicable transducer procedure and preserve the calibrated probe/cable combination. For standard probes, the catalogue requires at least 0.8 inch or 20 mm between case and unthreaded lengths.
Features:
- Match exact probe geometry, integral lead, extension cable and Proximitor calibration
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 21504-000-016-10-02 proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 21504-000-016-10-02 requires comparing exact probe geometry, integral lead, extension cable and Proximitor calibration. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use the documented 7200 5 mm or 8 mm probe, extension and Proximitor combination. The complete probe-to-Proximitor chain must match its five-metre or nine-metre calibration. The catalogue does not establish interchangeability with a 3300 XL or NSv component.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 21504-000-016-10-02 proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 21504-000-016-10-02 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.4x22.2x3.7cm
-
Shipping weight0.12 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 21504-000-016-10-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does 21504-000-016-10-02 identify?
The 21504-000-016-10-02 base identifies a 8 mm standard-mount probe with 3/8-24 threads. The total integral lead is 1 m. Compare the complete supplied code with the historical ordering table; unidentified fields are not assigned nominal dimensions or additional approvals. -
What is the function of this proximity probe?
The probe senses conductive-target position using the eddy-current principle. Its integral coaxial lead connects into a matched 7200 measuring chain for shaft vibration or position monitoring. Probe geometry, electrical length and the correct Proximitor must be selected together. -
Which sensing components must be compatible?
Use the documented 7200 5 mm or 8 mm probe, extension and Proximitor combination. The complete probe-to-Proximitor chain must match its five-metre or nine-metre calibration. The catalogue does not establish interchangeability with a 3300 XL or NSv component. -
Where is the documented system used?
The historical manufacturer catalogue describes radial-vibration measurements on rotating machinery. The complete compatible sensing chain measures shaft movement relative to the mounted probe. -
What must be checked during installation?
Use the ordered case thread and mounting arrangement. Set the gap using the applicable transducer procedure and preserve the calibrated probe/cable combination. For standard probes, the catalogue requires at least 0.8 inch or 20 mm between case and unthreaded lengths. -
Can a 5 m or 9 m integral probe lead use an additional extension?
The catalogue describes the 8 mm five-metre and nine-metre integral-lead options as configurations without a separate extension cable. Their electrical length must match the appropriate Proximitor. -
Does the catalogue permit every probe to have a long integral lead?
No. It limits the overall lead length of the 5 mm probe versions to one metre. The five-metre and nine-metre integral options belong to the documented 8 mm versions.
READY TO VERIFY YOUR PART?
Get a 21504-000-016-10-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
