AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 84510-50
-
Product Model84510-50
-
Product ParametersArmored cable
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size27x27x4cm
-
ManufacturerBently Nevada
-
Weight1 kg
-
Cable Type2-wire shielded armored cable
-
Conductor Size22 AWG (0.5 mm²)
-
Cable Configuration2-wire shielded construction
-
ShieldingOverall shield for EMI/RFI noise protection
-
Voltage RatingUp to 300 V
-
Minimum Cable Length3.0 ft (0.9 m)
-
Maximum Cable Length70 ft (21 m)
-
Operating Temperature Range-40°C to +85°C
Description
2-wire shielded 22 AWG (0.5mm2)
armored cable
with 2-socket female connector at oneend
terminal lugs at the otherend.
Minimum length of 3.0 ft (0.9 m)
maximum length of 70 ft (21 m)
armored cable
with 2-socket female connector at oneend
terminal lugs at the otherend.
Minimum length of 3.0 ft (0.9 m)
maximum length of 70 ft (21 m)
Information
Overview
Manuals
Technical notes
Product Applications
Connection and Mating Mechanics
Features:
- Stainless Steel Armor Option
- Custom Length Capability
- 2-Wire Velocity Transducer Compatible
- Standard Lengths Available
- For Continuous or Portable Monitoring
The 84510-50 Bently Nevada 2-wire shielded 22 AWG (0.5mm2) armored cable may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 84510-50 2-wire shielded 22 AWG (0.5mm2) armored cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The Seismoprobe family is a two-wire design that uses moving-coil technology and provides a voltage output directly proportional to the transducer's vibration velocity. Moving-coil transducers are less sensitive to impact or impulsive excitation than solid-state velocity transducers and, because they don't require external power, are convenient for portable measurement applications. For most installations, Bently Nevada's Velomitor family of solid-state velocity transducers provides improved performance and ruggedness; however, the Seismoprobe remains a good choice for certain applications where moving-coil characteristics are preferred.
- Turbine Vibration Monitoring:Tracks axial, radial & thermal expansion for steam/gas/hydro
- Industrial Compressor Protection:Casing velocity sensors: prevents heavy surges
- Large Industrial Pumps:Fluid-film bearing probes: safety trips for water/chemical plants
- Generator Bearing Tracking:Passes bearing data for grid stabilityy
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Verify Clean Contacts: Wipe the 3-socket female plug and sensor male pins with a residue-free electronic cleaner before connection to eliminate grease or moisture.
Hand-Tighten Interconnects: Thread the 3-socket circular connector firmly onto the sensor base housing by hand until it seats completely. Do not use heavy pliers on the connector threads to prevent stripping.
Isolate from Ground: Ensure the external metallic body of the mid-cable connector does not touch the machine frame.
If the cable does not feature an integrated rubber boot, insulate the raw junction entirely using self-fusing silicone tape.
FAQs
-
What is the 84510-50?+The Bently Nevada 84510-50 is a standard/armored 2-wire shielded, 22 AWG extension cable. It is primarily designed to connect Bently Nevada vibration sensors (like the 9200 and 74712 Seismoprobe Velocity Transducers) to monitoring systems,
-
What is the Bently Nevada 84510-50 used for?+It is used to transmit low-power vibration and proximity signals from industrial sensors to monitoring equipment. It typically features a 2-socket female connector on one end and terminal lugs on the other.
-
Does the cable come with protective armoring?+Yes, the "84510" series designates a cable that features a ruggedized outer shield designed for physical protection against harsh industrial environments, chemicals, and mechanical stress..
-
What sensors are compatible with this cable?+It is most commonly utilized alongside the 9200 and 74712 Seismoprobe Velocity Transducers to measure absolute bearing housing and casing vibration.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
-
-
-
330880-28-15-044-01-02PROXPAC XL Proximity Transducer,EnglishManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN