PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
84661-34 links vibration sensors to instruments
Bently Nevada 84661-34 is a 34-foot armored interconnect cable for vibration instruments. Its two twisted, shielded 22 AWG conductors connect a moisture-resistant two-socket female connector at one end to terminal lugs at the other.
The suffix 34 specifies length in feet, approximately 10.36 metres. The manufacturer lists the 84661 cable family for monitor or vibration-data-collector connections; match the sensor connector and instrument termination before ordering. Sensor measurement ratings are not cable ratings.
The suffix 34 specifies length in feet, approximately 10.36 metres. The manufacturer lists the 84661 cable family for monitor or vibration-data-collector connections; match the sensor connector and instrument termination before ordering. Sensor measurement ratings are not cable ratings.
BEFORE YOU BUY
Match the complete cable assembly
ACTUAL APPLICATIONS
Where 84661-34 connects vibration measurements
The manufacturer documents monitor and vibration-data-collector connections for the 84661 family. These scenarios distinguish continuous monitoring, periodic diagnosis and an accelerometer interconnect; confirm the actual equipment interfaces.
-
01 · CONTINUOUS MONITORING
Connect a casing-velocity channel
Use the armored interconnect in a compatible Seismoprobe velocity-monitoring arrangement. A continuous channel carries the transducer signal to the selected monitor through the documented female connector and terminal lugs. Confirm that the complete measurement system matches the machine and sensor installation. -
02 · PERIODIC DIAGNOSTICS
Link a diagnostic measurement route
The Seismoprobe documentation supports periodic measurements and lists this cable for vibration data collectors. Check that the diagnostic instrument accepts the terminal-lug connection and that 34 feet suits the route. A collector with a different input socket requires its appropriate connection arrangement. -
03 · ACCELERATION CHANNELS
Interconnect a TP100 or TP500
The TP100/TP500 data sheet lists 84661 as an armored cable with a straight two-pin connection. Use that documented family association when reviewing an accelerometer-to-monitor connection. Match the sensor interface and instrument terminals, and retain the stated exclusion for the 21128 housing.
Technical specifications for 84661-34
-
Product Model84661-34
-
Product ParametersArmored Interconnect Cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Ordered cable length34 ft (approximately 10.36 m)
-
Conductor count2 conductors
-
Wire gauge22 AWG (0.5 mm2 in source 141626 Rev. V)
-
Conductor arrangementTwisted pair
-
Electrical shieldingShielded construction
-
Mechanical protectionArmored cable
-
Sensor-end connectionTwo-socket moisture-resistant female connector
-
Instrument-end terminationTerminal lugs
-
Cable operating temperature-50 to +120 deg C (141626 Rev. V)
-
Connector orientationStraight (161M1037 Rev. -)
View all additional
Alternative Names
84661-34
84661 armored interconnect cable
34 ft vibration instrument cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
VIBRATION INSTRUMENT INTERCONNECTION
Check both cable ends and the installed route
Bently Nevada 84661-34 is a 34-foot armored interconnect cable for vibration instruments. Its two twisted, shielded 22 AWG conductors connect a moisture-resistant two-socket female connector at one end to terminal lugs at the other.
The two-socket female end and terminal-lug end serve different interfaces. Verify the selected transducer connection and the receiving instrument termination against their equipment documentation; no BNC plug is specified for this assembly.
The order is 34 feet long. Review the actual cable route against the cable-specific temperature limit in 141626 Rev. V, and distinguish cable construction from the connected sensor specifications. The TP100/TP500 document excludes the 21128 housing.
Features:
- Identify the receiving instrument terminals
- Match the straight female sensor connector
- Review the 34-foot route and environment
The 84661-34 needs both endpoint interfaces and the cable route checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare the installed cable label with 84661-34, then confirm the 34-foot length, armor, shielding, twisted conductors and both terminations. An assembly with the same conductor gauge alone is not an established equivalent.
Document the original sensor and instrument connection before replacement. Use the equipment wiring instructions for terminal assignments and commissioning. The cable data sheets do not provide a complete site-specific installation procedure.
Separate sensor limits from cable limits when reviewing the operating environment. The manufacturer technical-data download retains relevant family pages, while the installation guide is only a source-supported checklist, not a complete operation manual.
Features:
- Identify the full cable number and length
- Check the connector and lug terminations
- Retain equipment-specific wiring instructions
The 84661-34 requires replacement verification of cable construction, route, termination and instrument compatibility before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The Manufacturer's Manual file is a manufacturer technical-data extract, not a complete operation manual. The installation guide is limited to supported connection checks. Other cable families and sensor ratings shown on source pages do not automatically apply to 84661-34.
Features:
- Sources: Bently Nevada 141626 Rev. V and 161M1037 Rev. -
- Use equipment-specific instructions for terminal assignments and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 84661-34 is a technical-data extract rather than a complete operation manual; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.4 × 3.3 cm
-
Shipping weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8544422100
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 84661-34
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the 34 suffix mean a 34-metre assembly?
No. The manufacturer specifies NN as cable length in feet. This order is 34 ft, equivalent to 10.3632 m, normally expressed as approximately 10.36 m. -
What termination will the receiving instrument need?
The instrument end has terminal lugs, not a second two-socket connector. Check the actual monitor or data-collector terminal arrangement; the female connector is at the sensor end. -
Can this assembly plug straight into a BNC input?
A BNC plug is not part of the documented 84661 construction. The manufacturer separately describes a cable for BNC-input instruments. Do not assume the terminal-lug end can mate directly with a BNC socket. -
Does the armor make this cable suitable for a 21128 housing?
No. The 84661 entry in data sheet 161M1037 explicitly excludes use with the 21128 Velocity Transducer Housing. Mechanical armor does not remove that compatibility restriction. -
May the cable run at the 74712 sensor temperature limit?
No. Source 141626 Rev. V lists a cable operating limit of +120 degrees C for 84661, while the 74712 sensor has a different limit. Assess the cable route separately; a sensor rating does not extend the cable rating. -
Is ordinary two-core 22 AWG wire a like-for-like replacement?
Wire gauge alone does not identify this assembly. Its twisted and shielded construction, armor, female connector and terminal-lug termination must also be matched. Unspecified bulk wire is not established as an equivalent finished cable. -
Why is 34 ft absent from the standard-length table?
The manufacturer also allows custom cable lengths in one-foot increments and encodes the requested feet as NN. A 34-foot order falls within the published length ranges in both cited sources. -
Can the 9200 weight in the family document be used for this cable?
No. The 300 g figure in 141626 describes the 9200 transducer, not the 84661-34 cable or its shipping package. Sensor physical data must not be transferred to this cable listing.
READY TO VERIFY YOUR PART?
Get a 84661-34 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
