AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Ships by Tuesday, June 9
Fast Shipping Available
Require for Quote:
Need more help? You may also find the answer in our FAQ section
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 9200-09-01-06
-
Product Model9200-09-01-06
-
Product ParametersSeismoprobe VelocityTransducers
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size10x4x4cm
-
ManufacturerBently Nevada
-
Weight0.44 kg
-
Transducer Mounting Angle0 ±180, 15 Hz (900 cpm)
-
Connector/Cable OptionTop Mount (no cable)
-
Mounting Base OptionIsolated circular 1/4-20 UNC stud
-
Sensitivity20 mV/mm/s (500 mV/in/s) ±5%
-
Frequency Response15 Hz to 1 kHz (900 to 60,000 CPM), +0/-3 dB
-
Dynamic Operating Range2.54 mm (0.100 in) Peak-to-Peak Maximum Displacement
-
Velocity Range25 mm/s (1 in/s) at 100 Hz
-
Coil Resistance1.25 kΩ ±5%
-
Locked Coil Inductance125 mH Typical
Description
Bently Nevada™ Seismoprobe Velocity Transducer Systemsare designed to measure absolute (relative to free space)bearing housing, casing, or structural vibration. The two-wiresystems consist of a transducer and appropriate cable.
The Seismoprobe family of velocity transducers is a two-wiredesign that uses moving-coil technology. It provides avoltage output directly proportional to the transducer'svibration velocity.
Moving-coil transducers are less sensitive to impact orimpulsive excitation than solid-state velocity transducers,which are inherently accelerometers with embeddedintegration electronics.
The Seismoprobe family of velocity transducers is a two-wiredesign that uses moving-coil technology. It provides avoltage output directly proportional to the transducer'svibration velocity.
Moving-coil transducers are less sensitive to impact orimpulsive excitation than solid-state velocity transducers,which are inherently accelerometers with embeddedintegration electronics.
Alternative Names
9200-09-01-06-00
9200-09-01-06-04
9200-09-01-06-01
92OO-O9-O1-O6-OO
9200-09-0I-06-00
92OO-O9-O1-O6-O1
92OO-O9-O1-O6-O4
Information
Overview
Manuals
Application Notes
Product Applications
Coaxial Connection Handling
Features:
- Two-Wire Moving-Coil Technology
- No External Power Required
- Less Sensitive to Impact or Impulsive Excitation
- Integral Hardline Cable Option for Corrosive Environments
- Suitable for Continuous Monitoring or Periodic Measurements
The 9200-09-01-06 features a top-mount connector (no integral cable), allowing flexible field wiring via separate interconnect cables available in various lengths with or without stainless-steel armor. The isolated circular mounting base with a 1/4-20 UNC stud provides electrical isolation from the machine casing, preventing ground-loop interference while ensuring secure mechanical attachment. The 0° ±180° mounting angle / 15 Hz minimum frequency option makes this transducer suitable for general-purpose horizontal or vertical installations where very low-frequency response is not critical.
The 9200-09-01-06 Bently Nevada Two-wire Transducer may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 9200-09-01-06 Two-wire Transducer Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The anodized aluminum A204 case, neoprene gasket, and cadmium-plated connector provide durable environmental sealing against dust and moisture. With an operating temperature range of –29°C to +121°C, the 9200-09-01-06 is suitable for most industrial environments, though it is not rated for high-temperature service (for applications above +121°C, the 74712 high-temperature version is required).
- Steam Turbine Generators:Rotor-casing differential expansion
- Gas Turbines:Axial/structural expansion near heat zones
- Hydroelectric Turbines:Shaft wobble & thrust from hydraulic loads
- Marine Propulsion Systems:Thermal expansion for shafts & gearboxes.
- Steel Rolling Mills:Roll-gap/thrust under cyclic peak loads
- Large Cooling Tower Fans:Alignment & vibration across long couplings
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Hand Tighten Only: Join the connections finger-tight. You will feel and hear a physical "click" when the locking mechanism engages. Do not use pliers, wrenches, or hand tools. Exceeding 0.565 N·m (5 in·lb) of torque will crush the internal coaxial insulation and ruin the frequency response.
Bend Radius Constraints: Ensure the coaxial runs do not bend too sharply. Standard unarmored cables require a minimum bend radius of 25.4 mm (1.0 inch). Armored cables require a minimum bend radius of 38.1 mm (1.5 inches).
Technical notes
The Bently Nevada 9200-09-01-06 is a two-wire Seismoprobe Velocity Transducer designed for measuring absolute vibration (relative to free space) of bearing housings, machine casings, or structural components. It utilizes moving-coil (electrodynamic) technology, generating a voltage output directly proportional to the vibration velocity of the transducer itself. Because it requires no external power supply, it is inherently self-powered and particularly convenient for portable measurement applications or installations where loop power is not available.
FAQs
-
What is the 9200-09-01-06 ？
+The Bently Nevada 9200-09-01-06 is a two-wire Seismoprobe velocity transducer used for measuring absolute bearing housing, casing, and structural vibration. -
What is the sensitivity and frequency response of the transducer?
+The 9200 series offers a sensitivity of 20 mV/mm/s (500 mV/in/s), ± 5% at 100 Hz. Its frequency response ranges from its minimum operating frequency up to 1 kHz (60,000 cpm). -
What are the environmental and temperature limits?
+This standard sensor is qualified for operating and storage temperatures ranging from -29°C to +121°C. It is designed to be dust and moisture resistant, handling up to 95% non-condensing relative humidity -
Can this transducer be mounted in any orientation?
+
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN