PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 990 and 991 Transmitter
- 990-05-50-02-01
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Loop powered vibration transmitter
Bently Nevada 990-05-50-02-01 is a loop powered vibration transmitter configured for a zero to five mil peak-to-peak range and a five meter proximity system. This order specifies bulkhead mounting screws and the CSA Division 2 approval option in the manufacturer ordering table.
The transmitter accepts the documented NSv probe and extension cable and supplies a proportional 4 to 20 mA signal to the machinery control system. Its integrated Proximitor removes the need for a separate conditioner. Preserve diagnostic signal isolation and verify loop scaling, power and approval conditions.
The transmitter accepts the documented NSv probe and extension cable and supplies a proportional 4 to 20 mA signal to the machinery control system. Its integrated Proximitor removes the need for a separate conditioner. Preserve diagnostic signal isolation and verify loop scaling, power and approval conditions.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 990-05-50-02-01 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants. -
02 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
03 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants.
Technical specifications for 990-05-50-02-01
-
Product Model990-05-50-02-01
-
Product ParametersLoop powered vibration transmitter
-
In stock4 units
-
ManufacturerBently Nevada
-
Full-scale range0 to 5 mils peak-to-peak, approximately 125 micrometers
-
System electrical length5.0 m
-
Mounting selection02: bulkhead screws
-
Approval selection01: CSA Division 2
-
Loop signalTwo-wire 4 to 20 mA
-
Input supply+12 to +35 Vdc at transmitter terminals
-
Compatible inputOne 3300 NSv probe and extension cable
-
Maximum loop resistance1000 ohms at 35 Vdc, including cable
-
Not OK signalLess than 3.6 mA
-
Power-up inhibit2 to 3 seconds
-
Transmitter operating temperature-35 to +85 degrees C
-
Diagnostic connectionNon-isolated Prox Out; use documented isolation adapter
View all additional
Alternative Names
990-05-50-02-01 loop powered vibration transmitter
Loop powered vibration transmitter for Bently Nevada 990-05-50-02-01
990 05 50 02 01 Bently Nevada
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
LOOP POWERED VIBRATION TRANSMITTER
Integrating 990-05-50-02-01
Bently Nevada 990-05-50-02-01 is a loop powered vibration transmitter configured for a zero to five mil peak-to-peak range and a five meter proximity system. This order specifies bulkhead mounting screws and the CSA Division 2 approval option in the manufacturer ordering table.
The transmitter accepts the documented NSv probe and extension cable and supplies a proportional 4 to 20 mA signal to the machinery control system. Its integrated Proximitor removes the need for a separate conditioner. Preserve diagnostic signal isolation and verify loop scaling, power and approval conditions.
Check the complete 990-05-50-02-01 identity and the documented mating equipment. No. The 990 integrates the conditioning function for its documented NSv probe and extension cable arrangement.
Features:
- Full-scale range
- System electrical length
- Mounting selection
The 990-05-50-02-01 loop powered vibration transmitter requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Match the complete 990-05-50-02-01 identity, mounting and electrical configuration before replacement. A similar appearance or shared series name is not proof of an interchangeable part.
No. The manufacturer states that this overall vibration signal cannot determine phase and does not replace a complete dynamic diagnostic monitoring system.
The reviewed manufacturer publication does not establish an exact hardware revision, discontinuation date or unconditional successor for this record. Publication revisions are not product hardware revisions.
Features:
- Preserve the complete ordered identity
- Check component and system requirements
- Do not infer a successor from appearance
The 990-05-50-02-01 loop powered vibration transmitter requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 990-05-50-02-01 loop powered vibration transmitter must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size7.3 x 5 x 10 cm
-
Shipping weight0.44 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 990-05-50-02-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What range should the control system use for this order?
Scale the loop for zero to five mils peak-to-peak, approximately zero to 125 micrometers peak-to-peak. It is not an RMS velocity range. -
Is a separate Proximitor required?
No. The 990 integrates the conditioning function for its documented NSv probe and extension cable arrangement. -
Which mounting hardware does option 02 select?
It selects bulkhead screws. DIN clips are separate ordering selections. -
Can grounded test equipment connect directly to Prox Out?
The manufacturer recommends the 990/991 test adapter for isolation. Prox Out is not isolated from the loop, so preserve the documented grounding arrangement. -
What does a signal below 3.6 mA indicate?
The datasheet uses this level for Not OK and power-up inhibit conditions. Check transducer connections and the documented start-up interval. -
Does the 4 to 20 mA signal provide phase diagnostics?
No. The manufacturer states that this overall vibration signal cannot determine phase and does not replace a complete dynamic diagnostic monitoring system.
READY TO VERIFY YOUR PART?
Get a 990-05-50-02-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
