PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 990 and 991 Transmitter
- 990-10-XX-01-05 MOD:285269-01
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Vibration measurement transmitter
Bently Nevada 990-10-XX-01-05 MOD:285269-01 is a vibration transmitter. The two-wire transmitter conditions a compatible proximity-probe signal into peak-to-peak vibration amplitude and sends a proportional current output to the machinery-control system. The receiving system provides protection logic; this transmitter does not reproduce a complete diagnostic monitoring system.
Compare the selected measurement range, calibrated probe-system length, mounting hardware and approval suffix with the installed assembly. The probe and extension cable must match the transmitter configuration; unresolved ordering fields require confirmation before replacement or commissioning.
Compare the selected measurement range, calibrated probe-system length, mounting hardware and approval suffix with the installed assembly. The probe and extension cable must match the transmitter configuration; unresolved ordering fields require confirmation before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 990 transmitter
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · AIR COMPRESSORS
Compact compressor monitoring inputs
The manufacturer identifies centrifugal air-compressor OEM applications. The matched proximity chain supplies a peak-to-peak vibration current signal to the machinery control system, where alarms and protective logic are configured. -
02 · PUMPS AND MOTORS
Local machinery-control measurements
The official application scope includes small pumps and motors. Use the transmitter for the specified peak-to-peak vibration measurement with compatible probes, calibrated range and target arrangement; it is not a general electrical motor-protection relay. -
03 · FAN MACHINERY
Simple analog monitoring channels
The manufacturer includes small fans in its OEM application scope. The loop conveys a scaled machinery measurement to the receiving control system; advanced diagnostics require capabilities beyond this simple current-loop output.
Technical specifications for 990-10-XX-01-05 MOD:285269-01
-
Product Model990-10-XX-01-05 MOD:285269-01
-
Spare Model990-10-XX-01-05
-
Product ParametersVibration measurement transmitter
-
In stock4 units
-
ManufacturerBently Nevada
-
Standard transducer inputOne 3300 NSv probe and matching extension cable
-
Signal output4-20 mAdc, two-wire loop
-
Transmitter supply+12 to +35 Vdc at transmitter terminals
-
Maximum loop resistance1000 ohm including cable at 35 Vdc
-
Typical current limiting23 mA
-
Zero and spanNon-interacting external adjustments
-
Not OK outputLess than 3.6 mA within 100 microseconds
-
Not OK recovery2-3 seconds after fault removal
-
Transmitter operating range-35 to +85 deg C
-
Transmitter storage range-52 to +100 deg C
-
Diagnostic lead limit3 m from Proximitor output BNC connector
View all additional
Alternative Names
990-10-XX-01-05 MOD:285269-01 vibration transmitter
Bently Nevada 990-10-XX-01-05 MOD:285269-01
990 10 XX 01 05 MOD:285269 01 transmitter
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
VIBRATION MEASUREMENT TRANSMITTER
Integrating 990-10-XX-01-05 MOD:285269-01
The two-wire transmitter conditions a compatible proximity-probe signal into peak-to-peak vibration amplitude and sends a proportional current output to the machinery-control system. The receiving system provides protection logic; this transmitter does not reproduce a complete diagnostic monitoring system.
The standard configuration accepts a 3300 NSv proximity probe and matched extension cable in a five-metre or seven-metre system. The integrated Proximitor Sensor means no separate external conditioner is required. Verify any factory modification before changing probe families.
Confirm loop supply, load resistance, polarity, mounting and the complete probe/cable length. Set the probe gap using the installation manual; do not substitute an assumed gap from a different probe family. Follow the applicable hazardous-area drawing and delivered approval conditions.
Features:
- Match measurement range, matched probe chain, loop wiring, mounting and approvals
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 990-10-XX-01-05 MOD:285269-01 vibration transmitter requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 990-10-XX-01-05 MOD:285269-01 requires comparing measurement range, matched probe chain, loop wiring, mounting and approvals. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
990 measures vibration amplitude; 991 measures axial position. A shared current-loop interface does not make them interchangeable. The standard configuration accepts a 3300 NSv proximity probe and matched extension cable in a five-metre or seven-metre system. The integrated Proximitor Sensor means no separate external conditioner is required. Verify any factory modification before changing probe families.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 990-10-XX-01-05 MOD:285269-01 vibration transmitter requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 990-10-XX-01-05 MOD:285269-01 vibration transmitter must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size10x7.5x5.2cm
-
Shipping weight0.44 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 990-10-XX-01-05 MOD:285269-01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does 990-10-XX-01-05 MOD:285269-01 identify?
It is a 990 vibration transmitter. Compare the selected measurement range, calibrated probe-system length, mounting hardware and approval suffix with the installed assembly. The probe and extension cable must match the transmitter configuration; unresolved ordering fields require confirmation before replacement or commissioning. -
What does its 4-20 mA output represent?
The two-wire transmitter conditions a compatible proximity-probe signal into peak-to-peak vibration amplitude and sends a proportional current output to the machinery-control system. The receiving system provides protection logic; this transmitter does not reproduce a complete diagnostic monitoring system. -
Which probe and extension cable are compatible?
The standard configuration accepts a 3300 NSv proximity probe and matched extension cable in a five-metre or seven-metre system. The integrated Proximitor Sensor means no separate external conditioner is required. Verify any factory modification before changing probe families. -
Which machinery applications are documented?
The manufacturer includes small fans in its OEM application scope. The loop conveys a scaled machinery measurement to the receiving control system; advanced diagnostics require capabilities beyond this simple current-loop output. -
What must be checked during installation?
Confirm loop supply, load resistance, polarity, mounting and the complete probe/cable length. Set the probe gap using the installation manual; do not substitute an assumed gap from a different probe family. Follow the applicable hazardous-area drawing and delivered approval conditions. -
Can an oscilloscope be connected directly to PROX OUT?
PROX OUT is not isolated from the current loop. Use the documented 122115-01 test adapter with grounded, AC-powered test equipment; the manufacturer strongly recommends the adapter to maintain isolation and machinery-protection integrity. -
What happens when a probe fault produces a Not OK condition?
The current output falls below 3.6 mA within 100 microseconds. It is restored within 2-3 seconds after the fault is removed. Power-up also holds the output below 3.6 mA for 2-3 seconds.
READY TO VERIFY YOUR PART?
Get a 990-10-XX-01-05 MOD:285269-01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
990-10-XX-01-05 MOD:285269-01Vibration measurement transmitterManufacturer: Bently NevadaView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
