ControlEdge RTU

ControlEdge Builder R174 Media Kit

ControlEdge Builder R174 Media Kit 
Media and documentation. 
Delivered as DVD with software anddocumentation

ControlEdge Builder R174 Media Kit

ControlEdge Builder R174 Media Kit 
Media and documentation. 
Delivered as DVD with software anddocumentation

ControlEdge Builder R172 Media Kit

ControlEdge Builder R172,
Media and documentation. 
Delivered as DVD with software anddocumentation

ControlEdge Builder R172 Media Kit

ControlEdge Builder R172,
Media and documentation. 
Delivered as DVD with software anddocumentation

ControlEdge Builder R171 Media Kit

ControlEdge Builder R171
Software Media Kit (Physical/USB)
Complete engineering environment
OS v4.3 for controllers/RTUs
HTML5/WebGL operator interfaces
Industry 4.0 connectivity

ControlEdge Builder R171 Media Kit

ControlEdge Builder R171
Software Media Kit (Physical/USB)
Complete engineering environment
OS v4.3 for controllers/RTUs
HTML5/WebGL operator interfaces
Industry 4.0 connectivity

ControlEdge Builder R170

ControlEdge Builder R170
IEC 61131-3 programming suite
OS updates for controllers/RTUs
ISA-101 compliant operator interfaces
IIoT connectivity management

ControlEdge Builder R170

ControlEdge Builder R170
IEC 61131-3 programming suite
OS updates for controllers/RTUs
ISA-101 compliant operator interfaces
IIoT connectivity management

HART Protocol Enabler License

HART Protocol Enabler License 
HART enabler license required for each I/O module
Additional runs require extra licenses
Requires SP-AIV01 add-on
Manual reconfiguration required
Not included (use SP-FCSIL)

Meter Run License, one

Metering Calculation Library 
Controller Resident
HART enabler license required for each I/O module
Additional runs require extra licenses
Requires SP-AIV01 add-on
Manual reconfiguration required
Not included (use SP-FCSIL)

ControlEdge Builder, client license

Configuration Tool Resident
ControlEdge Builder, client license
ControlEdge Builder 
Modbus, DNP3, IEC 61850, OPC UA, BACnet
Offline testing without hardware

EXPANSION END PLATE LEFT

Left End Plate
ControlEdge 2020
EXPANSION END PLATE LEFT 

Expansion End Plate

Expansion End Plate
Right
ControlEdge 2020 Platform
CPM and IOTA

Mixed I/O Module

Mixed 1/0 Module
28 channels 
Modbus RTU, DNP3, Ethernet/IP
24 VDC with configurable pull-up/pull-down
Configurable for 0-10 VDC or 4-20 mA
Surge and ESD protection on inputs/outputs

Redundant Controller

Minimum PowerConsumption 
where thereare no expansion IOMs
Power is supplied to the controller 
I/O modules through the power input terminals
the controller IOTA and the left endplate, (when used)
The relevant specifications at each 
power input terminals are detailed below

Non-redundant Controller

Minimum PowerConsumption 
where thereare no expansion IOMs
Power is supplied to the controller 
I/O modules through the power input terminals
the controller IOTA and the left endplate, (when used)
The relevant specifications at each 
power input terminals are detailed below.

SMART PRESSURE TRANSMITTER

ST3000
Accuracy = +/-0.0375%
Stability = +/-0.01% per year
Reliability = 470 years MTBF
Rangeability = 400 to 1

HTD Regulator

HTD Regulator
Miscellaneous Modules
Wide Range of Equipment

Redundant Controller

FTA I/O Cable

POWER CABLE
5 METER
FTA I/O Cable

EPNI Card

NETWORK INTERFACE MODULE
EPNI
TDC-3000
Max Nodes:64 nodes per LCN
Power Supply:+5V DC, ±12V DC
Power Consumption:15W typical
Operating Voltage:120/240V AC, 50/60Hz