PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- EBMPAPST
- A4E350-AQ02-11
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
A4E350-AQ02-11 axial cooling fan
EBMPAPST A4E350-AQ02-11 is an axial cooling fan in the ebm-papst A4E industrial ventilation. It is used to provide the documented cooling airflow for the associated equipment.
Its documented configuration includes fan model of A4E350-AQ02-11, fan type of Axial external-rotor fan, nominal voltage of 230 V AC, and supply frequency of 50 Hz. During operation, the axial cooling fan performs its assigned axial cooling fan function through the documented power, signal and communication interfaces.
Its documented configuration includes fan model of A4E350-AQ02-11, fan type of Axial external-rotor fan, nominal voltage of 230 V AC, and supply frequency of 50 Hz. During operation, the axial cooling fan performs its assigned axial cooling fan function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete axial cooling fan
ACTUAL APPLICATIONS
Where A4E350-AQ02-11 Fits Across Major Industry Sectors
Uses span data centers, property and healthcare, subject to verified compatibility, operating conditions and project requirements.
- 01 · DATA CENTERS
Commercial Data Hosting and Digital Service Operations
Commercial data hosting and storage for digital business services.Cloud computing operations supporting enterprise and consumer digital services. - 02 · COMMERCIAL REAL ESTATE
Commercial Property Operations and Business Facility Services
Commercial property operations for office and business accommodation services.Retail property management for commercial shopping and business activities. - 03 · HEALTHCARE
Hospital Service Delivery and Clinical Facility Operations
Hospital facility operations supporting inpatient treatment and healthcare services.Clinical facility management supporting outpatient care and medical services.
Technical specifications for A4E350-AQ02-11
-
Product ModelA4E350-AQ02-11
-
Product Parametersaxial cooling fan
-
In stock1 unit
-
ManufacturerEBMPAPST
-
Fan ModelA4E350-AQ02-11
-
Fan TypeAxial external-rotor fan
-
Nominal Voltage230 V AC
-
Supply Frequency50 Hz
-
Motor PhaseSingle phase
-
Input Power190 W class
-
Nominal Speed1380 r/min class
-
Impeller Diameter350 mm
-
Airflow DirectionIntake over motor
-
Motor ProtectionThermal overload protected
-
Bearing TypeMaintenance-free ball bearings
-
Run CapacitorExternal capacitor connection
-
MountingWall-ring axial assembly
-
RotationCounterclockwise viewed from rotor
-
ApplicationIndustrial cabinet ventilation
View all additional
Alternative Names
A4E350 AQ02 11
ebm-papst A4E industrial ventilation axial cooling fan
EBMPAPST axial cooling fan
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match A4E350-AQ02-11 to the installed ebm-papst A4E industrial ventilation
EBMPAPST A4E350-AQ02-11 is a axial cooling fan used in the ebm-papst A4E industrial ventilation. Use A4E350-AQ02-11 as the axial cooling fan in the ebm-papst A4E industrial ventilation. Confirm nominal voltage 230 V AC and the exact installed arrangement before connection.
Record the product label, airflow direction (Intake over motor), cable identification, grounding and adjacent hardware before removing the installed unit. Confirm single phase, 190 w class, the exact mechanical position and the approved system configuration before connection.
After installation, verify rotation (Counterclockwise viewed from rotor), check diagnostics and test the affected function before returning the equipment to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: A4E350-AQ02-11
- Product class: axial cooling fan
- Family: ebm-papst A4E industrial ventilation
The EBMPAPST A4E350-AQ02-11 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete A4E350-AQ02-11 identity before exchange
Replace A4E350-AQ02-11 only after matching the full article identity, axial cooling fan, installed 350 mm and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, thermal overload protected, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete industrial cabinet ventilation. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: A4E350-AQ02-11
- Connection: Thermal overload protected
- Test: Industrial cabinet ventilation
The EBMPAPST A4E350-AQ02-11 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for A4E350-AQ02-11
- Installation checks matched to ebm-papst A4E industrial ventilation
- Exact EBMPAPST identity required before service
Documentation for EBMPAPST A4E350-AQ02-11 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8414599099
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about A4E350-AQ02-11
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which nominal voltage must engineering verify for A4E350-AQ02-11?
For A4E350-AQ02-11, verify the documented nominal voltage is 230 V AC and confirm the remaining nameplate limits before connection. -
How should maintenance document the airflow direction before removing A4E350-AQ02-11?
Photograph the airflow direction, which is Intake over motor, plus terminal labels, cable routing, shields and adjacent hardware for A4E350-AQ02-11. -
What does the fan type value mean when sourcing A4E350-AQ02-11?
The exact documented value for A4E350-AQ02-11 is Axial external-rotor fan; use it with the full article code when checking the supplied configuration. -
Which motor phase limit applies during commissioning of A4E350-AQ02-11?
Apply Single phase for motor phase on A4E350-AQ02-11; also confirm protection, polarity and the approved startup procedure. -
Can a distributor quote A4E350-AQ02-11 from a shortened code?
No. Quote the complete identity A4E350-AQ02-11, manufacturer, quantity, destination, product photos and required documentation scope. -
What receiving inspection is appropriate for the axial cooling fan A4E350-AQ02-11?
Inspect A4E350-AQ02-11 for the full label, connector condition, revision markings, shipping damage and consistency with ebm-papst A4E industrial ventilation. -
Which system record should be retained after replacing A4E350-AQ02-11?
Retain the incoming inspection, original connection record, configuration backup, measured results and service approval for A4E350-AQ02-11. -
How is the restored axial cooling fan function tested for A4E350-AQ02-11?
Check status indications, diagnostics and the affected axial cooling fan response, then record the final result against A4E350-AQ02-11.
READY TO VERIFY YOUR PART?
Get a A4E350-AQ02-11 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
