Emerson

Remote I/O Controller Module

I/O Channels: 4–20 mA
Scalability: 8–16 I/O points per module 
Data Transfer Speed: Up to 100 Mbps 
Voltage: 18–32 VDC
Current Draw: <2 A typical 
Operating Temperature: –40°C to +70°C 
Storage Temperature: –50°C to +85°C
Humidity: 5–95% RH (non-condensing)

DeltaV 8-Port Ethernet Switch

Copper Ports: 6 × 10/100/1000Base-T RJ45 
Fiber Ports: 2 × 100/1000Base-X SFP 
Total Ports: 8 ports
Input Voltage: 24 VDC
Power Consumption: Typically <15W
Switching Capacity: 16 Gbps
Packet Forwarding Rate: 11.9 Mpps.
MAC Address Table: 8K entries.
Jumbo Frames: Support up to 9.6 kB

I/O EXPANSION UNIT

CONTROL WAVE
BASE CHASSIS
MICRO PANEL
8 SLOT
2 MA AT 3.3 VDC
RACK MOUNT

Industrial Control Module

Digital Inputs/Outputs: 
Supports discrete I/O for control and status monitoring.
Analog Inputs/Outputs: 
Can include support for continuous analog signals
Operating Temperature: 0°C to 60°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95%, non-condensing

IS module power supply carrier

IS module power supply carrier 8724-CA-PS
Accommodates one 8920 PSU module
DIN rail or panel mounting
printed wiring board
rugged polycarbonate moulding
32- and 64-slot address capable
CARRIER MOUNTING MODULE: 
System Power Supply module: 8920-PS-DC

DC power supply

8920-PS-DC
Power Module-Field Input
24VDC In
5A@12VDC Out
Power for 2/1 (IS) modules
Use2/1 (IS) 
modules power with 
support for load sharing redundancy

CPU MODULE

396657010
CPU MODULE
CONTROL WAVE
12-24 VDC
W/ LOCK KEY

Local I/O Bus Cable

Relay Assembly

RELAY ASSEMBLY
DIRECT AND DOUBLE ACTING
DVC

Control Techniques Unidrive

Control Techniques Unidrive 
SP 5.5kW 
Inverter Drive 13A 380...480V 
AC Three Phase
Servo - Precision

Power Distribution Module

Nominal AC Input Voltage 100 - 240 VAC
AC Input Voltage Range 85 to 264 VAC
DC Input Voltage Range 90 to 375 VDC
Frequency 43 to 67 Hz
Nominal Current 3.2 – 1.0 A
Efficiency > 90% typ. (24 W)
Inrush Current (max) Typ. < 30 A
Power Factor Correction Active power factor correction to better than 0.92
Voltage Phase Type Single phase (AC voltage)

AC SERVO DRIVE

AC SERVO DRIVE
VARIABLE FREQUENCY
3 PHASE
380/480 VAC
50/60 HZ
20 HP
29 AMP
NORMAL DUTY
OPEN LOOP VECTOR CTRL
CLOSED LOOP IND MOTOR CTRL
REGENERATIVE CONTROL

Control Base Assembly

CONTROLLER BASE RACK
4 SLOT
Distributed Control System
supports 8 to 16 I/O
24 VDC
Operating Temperature 0°C to 60°C
Storage Temperature -40°C to 85°C
Humidity 5% to 95% non-condensing

1C31222G01:Relay Output Base - High Power 1C31219G01:Relay Output Logic Module

PLC RELAY OUTPUT
BASE
Current: 2A to 5A
Voltage: Up to 250V AC/DC or 24V DC
AC: Up to 250V AC, 5A 
DC: Up to 30V DC, 5A 
Operating Temperature Range -10°C to 60°C