PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
VE5126 20-amp bulk power supply
Emerson VE5126 is a 20-amp bulk power supply in the DeltaV bulk power systems. It is used to supply the specified operating power to the connected automation hardware.
Its documented configuration includes input supply of 100 to 240 V AC, output supply of 24 V DC, output current of 20 A, and operating temperature of -40 to +70 °C. During operation, the 20-amp bulk power supply converts and distributes the specified supply voltage to the connected hardware.
Its documented configuration includes input supply of 100 to 240 V AC, output supply of 24 V DC, output current of 20 A, and operating temperature of -40 to +70 °C. During operation, the 20-amp bulk power supply converts and distributes the specified supply voltage to the connected hardware.
BEFORE YOU BUY
Confirm the complete 20-amp bulk power supply
ACTUAL APPLICATIONS
Where VE5126 supports industrial control systems
Official documentation supports these system applications when DeltaV bulk power systems are correctly configured.
-
01 · WATER & WASTEWATER
Pumping and filtration 20-Amp Bulk Power Supply applications
Utility Automation SystemsPump station process monitoring for 20-amp bulk power supplyFilter train actuator control for 20-amp bulk power supply -
02 · FOOD & BEVERAGE
Batching and packaging 20-Amp Bulk Power Supply applications
Production Control SystemsBatch vessel loop acquisition for 20-amp bulk power supplyPackaging line status control for 20-amp bulk power supply -
03 · PHARMACEUTICAL
Batch and utility suites 20-Amp Bulk Power Supply applications
Validated Control SystemsClean utility signal monitoring for 20-amp bulk power supplyBatch equipment interlock handling for 20-amp bulk power supply
Technical specifications for VE5126
-
Product ModelVE5126
-
Product Parameters20-amp bulk power supply
-
In stock1 unit
-
ManufacturerEmerson
-
Input Supply100 to 240 V AC
-
Output Supply24 V DC
-
Output Current20 A
-
Operating Temperature-40 to +70 °C
-
Storage Temperature-40 to +85 °C
-
Relative Humidity5 to 95% non-condensing
-
Protection RatingIP20
-
Shock Rating10 g, 11 ms
-
Vibration Rating2.5 g RMS, 10 to 2000 Hz
-
MountingHorizontal DIN rail
-
Airborne ContaminantsISA G3
View all additional
Alternative Names
VE5126
DeltaV bulk power systems 20-amp bulk power supply
DeltaV 20-amp bulk power supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match VE5126 to the installed DeltaV bulk power systems
Emerson VE5126 is a 20-amp bulk power supply for the DeltaV bulk power systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare operating temperature (-40 to +70 °C), storage temperature (-40 to +85 °C) and relative humidity (5 to 95% non-condensing) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: VE5126
- Product class: 20-amp bulk power supply
- Family: DeltaV bulk power systems
The Emerson VE5126 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete VE5126 identity before exchange
Replace VE5126 only after matching the complete article code, 20-amp bulk power supply, installed DeltaV bulk power systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: VE5126
- Product class: 20-amp bulk power supply
- Family check: DeltaV bulk power systems
The Emerson VE5126 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for VE5126
- DeltaV DeltaV bulk power systems references reviewed
- Exact DeltaV identity required before service
Documentation for DeltaV VE5126 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.0 × 13.0 × 10.0 cm
-
Shipping weight1.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504409999
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about VE5126
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which identity checks confirm the exact VE5126?
Match the complete VE5126 nameplate, 20-amp bulk power supply, hardware revision and documented DeltaV bulk power systems position. -
What should engineering verify before connecting VE5126?
Compare the documented supply, signal or network interface, connector keying, addresses and companion equipment for VE5126. -
Can a similar family article directly replace VE5126?
No automatic substitution is established; compare the complete article code, ratings, interface set, firmware and physical arrangement. -
What records should be captured before removing VE5126?
Photograph labels, terminals, plugs, shields, earth conductors and adjacent modules, then back up the applicable configuration. -
How should VE5126 be inspected on arrival?
Check the exact label, housing or board condition, connectors, supplied accessories and transport protection before installation. -
Which commissioning checks apply after fitting VE5126?
Verify supply and wiring, restore the approved configuration, inspect diagnostics and test the affected system function safely. -
What quotation details are required for VE5126?
Provide the complete model, quantity, nameplate photographs, installed system, required interface and destination. -
Which service evidence should be retained for VE5126?
Retain the receiving inspection, connection record, configuration backup, measurements, diagnostic results and acceptance record.
READY TO VERIFY YOUR PART?
Get a VE5126 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
