PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Epro
- PR6423/003-110
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
PR6423/003-110 8 mm eddy-current sensor
PR6423/003-110 is an 8 mm eddy-current sensor for non-contact shaft displacement and vibration measurement with an applicable CON021 converter. The model identity, electrical limits and compatible system must be confirmed before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete 8 mm eddy-current sensor
ACTUAL APPLICATIONS
Application context for PR6423/003-110
The applications below show typical industry settings, application scenarios, application areas and equipment for PR6423/003-110. Confirm the exact product configuration before use.
-
01 · POWER GENERATION
Shaft displacement and vibration measurement
Plant areas servedTurbine shaft journalsGenerator thrust positions -
02 · OIL & GAS
Compressor rotor position monitoring
Process unitsCompressor radial bearingsAxial thrust collars -
03 · CHEMICAL PROCESSING
Non-contact shaft movement measurement
Process unitsProcess pump shaftsHigh-speed blower rotors
Technical specifications for PR6423/003-110
-
Product ModelPR6423/003-110
-
Product Parameters8 mm eddy-current sensor
-
In stock1 unit
-
ManufacturerEpro
-
Probe diameter8 mm
-
Mounting styleStandard threaded mount
-
Linear measuring range2 mm
-
Initial air gap0.5 mm
-
Sensitivity8 V/mm ±5%
-
Linearity deviation±0.025 mm
-
Minimum shaft diameter25 mm
-
Reference target42CrMo4 steel
-
Ingress protectionIP66
-
Sensor temperature-35 to +180 °C
-
Cable temperature-35 to +150 °C
-
Tip materialPEEK
-
Housing materialStainless steel
-
Cable materialPTFE
View all additional
Alternative Names
PR6423/003 110
PR6423 eddy-current sensors 8 mm eddy-current sensor
Emerson 8 mm eddy-current sensor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match PR6423/003-110 to the installed PR6423 eddy-current sensors
Emerson PR6423/003-110 is a 8 mm eddy-current sensor for the PR6423 eddy-current sensors. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare initial air gap (0.5 mm), sensitivity (8 V/mm ±5%) and linearity deviation (±0.025 mm) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: PR6423/003-110
- Product class: 8 mm eddy-current sensor
- Family: PR6423 eddy-current sensors
The Emerson PR6423/003-110 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete PR6423/003-110 identity before exchange
Replace PR6423/003-110 only after matching the complete article code, 8 mm eddy-current sensor, installed PR6423 eddy-current sensors role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: PR6423/003-110
- Product class: 8 mm eddy-current sensor
- Family check: PR6423 eddy-current sensors
The Emerson PR6423/003-110 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for PR6423/003-110
- Emerson PR6423 eddy-current sensors references reviewed
- Exact Emerson identity required before service
Documentation for Emerson PR6423/003-110 must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size25 × 8 × 8 cm
-
Shipping weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about PR6423/003-110
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
PR6423/003-110 probe diameter for panel retrofit?
For PR6423/003-110 during retrofit planning, a panel builder should match probe diameter (8 mm) and mounting style (Standard threaded mount) to the installed PR6423 eddy-current sensors design. A mismatch can prevent correct integration even when the hardware appears similar. -
PR6423/003-110 at Standard threaded mount: panel retrofit concern?
For retrofit planning, identify PR6423/003-110 by the combined specification: mounting style is Standard threaded mount, while linear measuring range is 2 mm. A panel builder should confirm both values rather than relying on the family name or enclosure. -
How panel retrofit teams check PR6423/003-110 linear measuring range?
Before wiring or mounting PR6423/003-110, a panel builder should verify the installation supports linear measuring range of 2 mm and preserves the documented initial air gap of 0.5 mm. Record this check in the retrofit planning work pack. -
Can PR6423/003-110 deliver 0.5 mm in panel retrofit?
During retrofit planning, a panel builder should commission PR6423/003-110 under a controlled load or signal and confirm initial air gap reaches 0.5 mm. Cross-check sensitivity against 8 V/mm ±5%, then save the measured result for engineering acceptance. -
Is PR6423/003-110 the right panel retrofit spare?
During retrofit planning, a panel builder should isolate the circuit, compare the actual sensitivity with the PR6423/003-110 specification of 8 V/mm ±5%, and inspect the related linearity deviation requirement (±0.025 mm). This separates a module fault from a supply, wiring, or configuration issue. -
Is ±0.025 mm suitable for PR6423/003-110 in panel retrofit?
For retrofit planning, the PR6423/003-110 service record should state linearity deviation as ±0.025 mm and retain minimum shaft diameter at 25 mm. These values give a panel builder a repeatable baseline for later replacement and fault diagnosis. -
Which PR6423/003-110 minimum shaft diameter matters in distributor panel retrofit?
For a panel builder's retrofit planning request, the quotation should identify the complete PR6423/003-110 code and confirm minimum shaft diameter (25 mm) together with reference target (42CrMo4 steel). The distributor should flag any revision or substitute that changes either requirement. -
42CrMo4 steel on PR6423/003-110: what should MRO panel retrofit confirm?
For a panel builder's retrofit planning requirement, check the delivered PR6423/003-110 label and order code, then verify reference target is 42CrMo4 steel and probe diameter is 8 mm. Photograph the label and connectors before acceptance so purchasing and maintenance share the same identity record.
READY TO VERIFY YOUR PART?
Get a PR6423/003-110 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
