PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Epro
- PR6423/014-111 CON031
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
PR6423/014-111 CON031 Eddy current sensor system
Emerson PR6423/014-111 with CON031 is a matched 8 mm eddy-current transducer system used for non-contact shaft-position and vibration measurements. The PR6423 probe is designed for demanding machinery environments, while the CON031 signal converter supplies the conditioned gap-voltage output required by the connected monitoring channel. Correct performance depends on the exact probe option, extension lead, converter version, target material, shield routing and mechanical gap. These items must be documented before replacement and validated during commissioning.
BEFORE YOU BUY
Confirm the complete Eddy current sensor system
ACTUAL APPLICATIONS
Application context for PR6423/014-111 CON031
Manufacturer documentation places the Eddy Current Sensor System in practical generic applications. The three cases below describe different operating tasks in which PR6423/014-111 CON031 performs its documented product-family role with the configured companion equipment.
- 01 · FOOD & BEVERAGE
Align aseptic filling with Eddy Current process control
For the coordinated operation of the fillers and container conveyors, PR6423/014-111 CON031 provides its specified system function as a Eddy Current Sensor System. During line-speed ramp, the system uses this function to keep container flow synchronized with filling demand, helping it move accepted containers toward inspection. - 02 · POWER GENERATION
Monitor turbine auxiliary control with Eddy Current
Inside the lube-oil pumps and turning gear, PR6423/014-111 CON031 provides its specified system function as a Eddy Current Sensor System. During unit run-up, the system uses this function to coordinate permissives and auxiliary equipment states, helping it support a stable transition to rated operation. - 03 · WATER & WASTEWATER
Integrate chemical dosing with Eddy Current process control
For the coordinated operation of the metering pumps and contact tanks, PR6423/014-111 CON031 provides its specified system function as a Eddy Current Sensor System. During dose-setpoint correction, the system uses this function to match reagent flow to the measured process load, helping it keep treatment chemistry inside its operating target.
Technical specifications for PR6423/014-111 CON031
-
Product ModelPR6423/014-111 CON031
-
Product ParametersEddy current sensor system
-
In stock1 unit
-
ManufacturerEpro
-
Probe Diameter8 mm nominal
-
Measurement PrincipleEddy current displacement
-
Probe VariantPR6423/014-111
-
Converter TypeCON031 signal converter
-
Target MaterialFerromagnetic steel
-
Probe Temperature-35 to +180 °C
-
Brief Temperature+200 °C maximum
-
Pressure Rating10000 hPa sensor head
-
Output SignalConditioned gap voltage
-
Connection MethodMatched extension lead
-
ApplicationShaft position monitoring
-
System PairingPR6423 with CON031
-
Cable RoutingShielded low-noise path
-
CalibrationProbe-converter matching
-
CommissioningGap, scale and polarity test
View all additional
Alternative Names
PR6423/014-111 CON031
PR6423/014 111 CON031
Emerson PR6423/014-111 CON031
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match PR6423/014-111 CON031 to the installed PR6423 / CON031
Emerson PR6423/014-111 CON031 is a Eddy current sensor system used in the PR6423 / CON031.
Confirm probe diameter, probe variant, field terminals and the approved system configuration.
Use qualified personnel and follow the applicable Emerson installation and commissioning instructions.
Features:
- Exact identity: PR6423/014-111 CON031
- Product class: Eddy current sensor system
- Family: PR6423 / CON031
The Emerson PR6423/014-111 CON031 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete PR6423/014-111 CON031 identity before exchange
Replace PR6423/014-111 CON031 only after matching its full product identity, system role and electrical interface.
Photograph terminals, cable routing, slot position and companion hardware before removal from the PR6423 / CON031 installation.
Follow the applicable Emerson service procedure and complete gap, scale and polarity test before release.
Features:
- Match exact PR6423/014-111 CON031 identity
- Confirm wiring and companion hardware
- Record the controlled functional test
The Emerson PR6423/014-111 CON031 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for PR6423/014-111 CON031
- Emerson system references reviewed
- Exact hardware identity required before service
Documentation for Emerson PR6423/014-111 CON031 must match the installed system and revision; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size22 × 20 × 2 cm
-
Shipping weight0.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about PR6423/014-111 CON031
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How does probe diameter 8 mm nominal define the correct PR6423/014-111 CON031 installation?
For PR6423/014-111 CON031, compare the installed nameplate and order code; the accepted probe diameter is 8 mm nominal in the documented PR6423 / CON031 configuration. -
Which field check confirms Eddy current displacement for PR6423/014-111 CON031?
For PR6423/014-111 CON031, measure the live field condition safely; the accepted measurement principle is Eddy current displacement in the documented PR6423 / CON031 configuration. -
Why is the documented probe variant critical on PR6423/014-111 CON031?
For PR6423/014-111 CON031, confirm the engineering configuration; the accepted probe variant is PR6423/014-111 in the documented PR6423 / CON031 configuration. -
What wiring decision for PR6423/014-111 CON031 depends on Ferromagnetic steel?
For PR6423/014-111 CON031, inspect the exact terminal and cable route; the accepted target material is Ferromagnetic steel in the documented PR6423 / CON031 configuration. -
How should technicians commission the brief temperature on PR6423/014-111 CON031?
For PR6423/014-111 CON031, run the documented channel test; the accepted brief temperature is +200 °C maximum in the documented PR6423 / CON031 configuration. -
What fault can a mismatch in output signal cause on PR6423/014-111 CON031?
For PR6423/014-111 CON031, review diagnostics before energising; the accepted output signal is Conditioned gap voltage in the documented PR6423 / CON031 configuration. -
Which companion hardware must agree with PR6423 with CON031 on PR6423/014-111 CON031?
For PR6423/014-111 CON031, match the mating assembly and revision; the accepted system pairing is PR6423 with CON031 in the documented PR6423 / CON031 configuration. -
What record proves the commissioning check for PR6423/014-111 CON031 was completed?
For PR6423/014-111 CON031, save the measured commissioning result; the accepted commissioning is Gap, scale and polarity test in the documented PR6423 / CON031 configuration.
READY TO VERIFY YOUR PART?
Get a PR6423/014-111 CON031 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
