

























Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
Current Source I/O Block
I/O MODULE
GENIUS BLOCK
CURRENT SOURCE ANALOG
4 INPUT / 2 OUTPUT
24/48 VDC POWER
4-20 MA CURRENT INPUTS AND OUTPUTS
Thermocouple Input Module
ANALOG INPUT MODULE
THERMOCOUPLE
8POINT
INDEPENDENT THERMOCOUPLE OR MULTIVOLT INPUTS
50/60HZ
Bus controller module
Series:Genius Bus I/O
Part Number:IC697BEM731F
Operating Voltage:5.0 Volt DC
Backplane Current:1.3 Amps
Bus Cable:Belden 9182 type cable
Module Width:Single Slot
Description:Genius I/O Bus Controller
Application:IC66 PLC System
Location:IC66 PLC Rack
Connectors:3PL and 1PL Ports
LED Indicators:3 LED Indicators
Average Weight:2.0 Pounds
Sink I/O terminal block
Input voltage range: 10-30V DC
Output voltage: 24V DC typical
Input: Up to 2mA per channel
Output: Rated for up to 2A per channel
Wiring Capability: typically 16-24 AWG
Operating Temperature: -40°C to +60°C
Humidity Tolerance: Up to 95% non-condensing
DC sink I/O terminal block
Series:Genius I/O
Voltage Ratings:12/24 Volts DC
Operating Temperature:0 to 60 degrees Celsius
Storage Temperature:-40 to 100 degrees Celsius
Relative Humidity:5%-95%, Non-condensing
Terminal block
Voltage Rating: Up to 250V AC/DC
Current Capacity: Typically up to 10A
Operating Temperature: -40°C to +70°C
Humidity Tolerance:
Up to 95% non-condensing
Analog I/O Module
Series:Series 90-30
Part Number:IC693ALG442
Product Description:Analog Current/Voltage Combination Module
No of Output Channels:2, single-ended
Update Rate:8 milliseconds
Resolution at 4-20 mA:0.5 microamps
Resolution at 0-20 mA:0.625 microamps
No of Input Channels:4 differential
Input Range:-0-10 Volts, -10 to 10 Volts
Input Impedance:800 K Ohms
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TSD100
Product Type:Terminal assembly
Operating Temperature:32 to 140 degrees Fahrenheit
Number of Circuits per I/O Block:8
Supported Memory:EEPROM
Genius Block I/O module
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660TSD021
Product Type:Terminal assembly
Compatibility:IC660BBD021 I/O Block
Solid-State Sensors:Supported
Relative Humidity:5 to 95%
Input Filter Time:5 to 100 milliseconds
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TSD020
Product type:Terminal assembly
3-Wire Solid-State Sensors:Supported
Operating Temperature:0 to 60 degrees Celsius
Inrush Current:10 Amps
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TSA100
Product Type:Terminal assembly
Operating Temperature:0 to 60 degrees Celsius
Heat Dissipation Rating:6 Watts
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TSA020
Product Type:Terminal assembly
Operating Temperature:0 to 60 degrees Celsius
Wire Gauge:12 AWG Wire
Genius Block I/O module
Brand:GE Fanuc
Series:Genius I-O
Part number:IC660TBR101
Product type:Terminal assembly
Compatibility:IC660BBR101
Relay type:Normally open
Genius Block I/O module
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660TBR100
Product type:Terminal assembly
Compatibility:IC660BBR100
Operating temperature:0 to 60 degrees Celsius
Block Circuit Type:Normally Closed
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TBD120
Block Type:High-speed counter
Operating Voltage:93 to 132 Volts AC / 10 to 30 Volts DC
Frequency/Ripple:47 to 63 Hertz / 10% maximum
Required AC Power:60 milli Amps typical / 250 milli Amps maximum
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TBD110
Block Type:16 circuits, inputs only
Rated Voltage:115 Volts AC Volts
Operating Voltage:93 to 132 Volts AC
Frequency:47 to 63 Hertz
Power Supply Dropout Time:1 cycle
Input to Ground Isolation:1500 Volts
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TBD025
Block Type:DC 32 circuit discrete input and output
Rated Voltage:5/12/24 Volts DC
Operating Voltage:4.9 to 5.3 Volts DC
Ripple:10% maximum (12/24 Volts) / 1% maximum (5 Volts)
Heat Dissipation (Maximum):18 Watts maximum
Block to Block Isolation:850 Volts
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TBD024
Block Type:DC 32 circuit discrete input and output
Rated Voltage:12/24 Volts DC
Operating Voltage:10 to 30 Volts DC
Ripple:10% maximum
Heat Dissipation (Maximum):18 Watts maximum
Block to Block Isolation:850 Volts
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TBD023
Block Type:16 circuit discrete input and output
Rated Voltage:24 Volts DC
Operating Voltage:18 to 30 Volts DC
Ripple:10% maximum
Power Supply Dropout Time:10 milliseconds (DC)
Block to Block Isolation:1500 Volts for 1 minute
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TBD022
Block Type:16 circuit discrete input and output
Rated Voltage:24 Volts DC
Operating Voltage:18 to 30 Volts DC
Ripple:10% maximum
Power Supply Dropout Time:10 milliseconds (DC)
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TBD021
Block Type:16 circuit discrete input and output
Rated Voltage:24 Volts DC
Operating Voltage:18 to 30 Volts DC
Ripple:10% maximum
Power Supply Dropout Time:10 milliseconds (DC)
Block to Block Isolation:1500 Volts for 1 minute
Genius Block I/O module
Series:Genius I-O
Part Number:IC660TBA106
Block Type:Six analog input circuits
Rated Voltage:115 Volts AC / 125 Volts DC
Frequency/Ripple:47 to 63 Hertz / 10% maximum ripple
Power Supply Dropout Time:1 cycle (AC) / 10 milliseconds (DC)
Heat Dissipation (Maximum):12 Watts
Block to Block Isolation:1500 Volts for 1 minute
Group to Group Isolation:1500 Volts RMS
TERMINAL ASSEMBLY
Series:Genius I-O
Part Number:IC660TBA105
Block Type:Six current-source outputs
Rated Voltage:115 Volts AC / 125 Volts DC
Frequency/Ripple:47 to 63 Hertz / 10% maximum ripple
Heat Dissipation (Maximum):12 Watts
Block to Block Isolation:1500 Volts for 1 minute
Power Supply Dropout Time:1 cycle (AC) / 10 milliseconds (DC)
TERMINAL ASSEMBLY
Series:Genius I-O
Part Number:IC660TBA104
Block Type:4 input and 2 output circuits
Rated Voltage:115 Volts AC / 125 Volts DC
Heat Dissipation (Maximum):12 Watts
Block to Block Isolation:1500 Volts for 1 minute
Group to Group Isolation:300 Volts
Power Supply Dropout Time:1 cycle (AC) / 10 milliseconds (DC)
Thermocouple input block
Series:Genius I-O
Part Number:IC660TBA101
Description:Terminal Assembly
Group to group isolation:300 Volts
Temperature:0-60 degrees Celsius
Power supply drop out time:115 Volts AC
Heat dissipation:7 watts
Block update time:400/800/1600 ms
Input circuit:6

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.