PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE Mark VIe
- DS200FSAAG1ABA
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
DS200FSAAG1ABA Mark V field supply gate amplifier board
General Electric DS200FSAAG1ABA is an FSAA field supply gate amplifier board for the Speedtronic Mark V control platform. It is identified as a G1 hardware assembly with normal PCB coating and the ABA revision sequence, providing a complete board-level ordering identity for maintenance and replacement.
The board includes five configuration jumpers, one 10-pin FPL connector and two fast-acting fuses rated 600 V and 30 A. For replacement, compare the full model suffix, jumper positions, connector orientation and fuse markings with the installed board, and use clear nameplate and board-face photographs to confirm the supplied revision.
The board includes five configuration jumpers, one 10-pin FPL connector and two fast-acting fuses rated 600 V and 30 A. For replacement, compare the full model suffix, jumper positions, connector orientation and fuse markings with the installed board, and use clear nameplate and board-face photographs to confirm the supplied revision.
BEFORE YOU BUY
Confirm the complete DS200FSAAG1ABA identity
ACTUAL APPLICATIONS
Application fields for DS200FSAAG1ABA
Three broad application areas are expanded below with two concise, related uses for procurement review.
-
01 · POWER GENERATION
Gas and Steam Turbine Power Generation
Gas turbine power generationSteam turbine and combined-cycle generation -
02 · OIL & GAS
Gas Compression and Petroleum Processing
Natural gas compression and transmissionPetroleum refining and process production -
03 · INDUSTRIAL MANUFACTURING
Continuous Production and Industrial Processing
Continuous production and materials processingLarge-scale industrial utility operations
Technical specifications for DS200FSAAG1ABA
-
Product ModelDS200FSAAG1ABA
-
Spare ModelDS200FSAAG1A
-
Product ParametersMark V field supply gate amplifier board
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Product familySpeedtronic Mark V
-
Board typeField supply gate amplifier board
-
Functional acronymFSAA
-
Hardware groupG1
-
PCB coatingNormal coating
-
Revision sequenceABA
-
Configuration jumpers5
-
Main connector1 x 10-pin, FPL
-
Fuses2 fast-acting fuses
-
Fuse rating600 V, 30 A
View all additional
Alternative Names
DS200FSAAG1A
FSAA field supply amplifier board
GE Mark V gate amplifier board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate DS200FSAAG1ABA with the verified installed configuration
Confirm that the installed board is an FSAA G1 assembly with the complete DS200FSAAG1ABA marking. The ABA suffix records two functional revisions and the artwork revision and must remain part of the procurement identity.
Record all five jumper positions, the orientation of the 10-pin FPL connector and both fuse markings before removal. Take clear photographs of the label, front and rear board faces, connector area and installed location.
Use ESD-safe handling and preserve the installed wiring and board orientation. After installation, inspect the 600 V, 30 A fuses and complete the approved Mark V power-up and functional checks.
Features:
- Complete ABA revision identity
- Five jumpers and FPL connector
- Two 600 V, 30 A fuses
DS200FSAAG1ABA must be integrated only after the complete identity, installed configuration and connection record have been confirmed.
INTERCHANGEABILITY
Verify the complete DS200FSAAG1ABA identity before replacement
Do not shorten DS200FSAAG1ABA to DS200FSAAG1 or FSAA when confirming a replacement. The ABA suffix is part of the board revision identity.
Compare the G1 hardware group, normal coating, five jumpers, FPL connector, both fuse positions and board layout with the installed assembly and approved records.
Provide front, rear, label, connector, jumper and fuse photographs before quotation. After installation, inspect seating and complete the approved Mark V energisation and functional checks.
Features:
- Complete DS200FSAAG1ABA suffix
- Board layout and jumper record
- Nameplate and board photographs
DS200FSAAG1ABA requires revision, hardware and supplied-scope verification before substitution is approved.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Exact-model technical data for DS200FSAAG1ABA
- Ordering identity and supplied scope verification
- Directory links by subcategory and brand
Documentation for DS200FSAAG1ABA must be checked against the full nameplate, installed revision and quoted supply before use.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size25.4 x 10.2 x 3.5 cm
-
Net weight0.40 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about DS200FSAAG1ABA
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Why must the complete DS200FSAAG1ABA suffix be retained?
The ABA suffix records the first functional revision, second functional revision and artwork revision. Omitting it can hide a board-level compatibility difference. -
Which photographs are required before replacing DS200FSAAG1ABA?
Provide the full board label, front and rear board faces, connector area, jumper positions, fuse markings and the installed slot or cabinet location. -
Which board details should be compared before ordering DS200FSAAG1ABA?
Compare the FSAA designation, G1 hardware group, normal coating, ABA revision sequence, five jumpers, FPL connector and two fuse positions. -
How should the DS200FSAAG1ABA fuse rating be verified?
Read both installed fuse markings and compare them with the documented 600 V, 30 A rating. Do not infer the rating from physical size alone. -
What is included with a DS200FSAAG1ABA quotation?
The quotation should state whether it is the board only and identify any included fuses, packaging or accessories. Unlisted items are not part of the supply. -
Which documentation is applicable to DS200FSAAG1ABA?
Use documentation that covers the DS200FSAA board family and confirm that its revision scope includes the complete DS200FSAAG1ABA marking. -
How is the lead time for DS200FSAAG1ABA confirmed?
Lead time depends on the verified revision, condition and quantity. Supply the delivery destination and required date for a written confirmation. -
Can DS200FSAAG1A or another revision replace DS200FSAAG1ABA?
Not by abbreviated model alone. Match the complete suffix, coating, jumper positions, connector layout, fuse configuration and approved Mark V hardware records.
READY TO VERIFY YOUR PART?
Get a DS200FSAAG1ABA quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
DS200FSAAG1ABAMark V field supply gate amplifier boardManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
