PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE Mark VIe
- IS200TBAIH1CED
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IS200TBAIH1CED Analog I/O Terminal Board
GE IS200TBAIH1CED is an analog I/O terminal board in the Mark VIe TBAIH1C family. It connects configured analog field circuits to compatible PAIC I/O packs in the documented control arrangement.
The family documentation specifies ten analog inputs, two outputs and three DC-37 processor connections, with two twenty-four-position field terminal blocks. Jumpers select the supported input and output arrangements. The complete CED board execution, PAIC compatibility and transmitter loading must be checked against the installed hardware.
The family documentation specifies ten analog inputs, two outputs and three DC-37 processor connections, with two twenty-four-position field terminal blocks. Jumpers select the supported input and output arrangements. The complete CED board execution, PAIC compatibility and transmitter loading must be checked against the installed hardware.
BEFORE YOU BUY
Confirm the complete analog i/o terminal board
ACTUAL APPLICATIONS
Application context for IS200TBAIH1CED
IS200TBAIH1CED is a analog i/o terminal board associated with Mark VIe TBAIH1C. Relevant industry settings include power generation, oil and gas, chemical processing. Compatibility depends on the installed hardware, connected circuits and documented configuration.
-
01 · POWER GENERATION
Electric Power and Industrial Energy Production
Electric Power Generation ControlIndustrial Cogeneration Process Control -
02 · OIL & GAS
Oil and Natural Gas Production
Oil Exploration and ProductionNatural Gas Processing Production -
03 · CHEMICAL PROCESSING
Chemical Manufacturing and Continuous Process Production
Industrial Chemical Process ControlPetrochemical Processing and Production
Technical specifications for IS200TBAIH1CED
-
Product ModelIS200TBAIH1CED
-
Spare ModelIS200TBAIH1C
-
Product ParametersAnalog I/O Terminal Board
-
In stock9 units
-
ManufacturerGeneral Electric
-
Analog input allocation10 channels
-
Analog output allocation2 channels
-
Processor connector allocation3 DC-37 connectors
-
Terminal block allocation2 blocks, 24 terminals each
-
Maximum terminal wire size12 AWG
-
Voltage input ranges±5 V or ±10 V DC
-
Current transmitter range4–20 mA
-
Transmitter supply24 V DC, 21 mA per connection
-
Transmitter cable resistance15 Ω maximum two-way
-
Maximum transmitter cable length300 m
-
Current output selection20 mA or 200 mA on output 1; 20 mA on output 2
-
Output load for TBAIH1C and PAIC800 Ω maximum at 4–20 mA
-
Output load at 200 mA50 Ω maximum
-
Operating ambient temperature−30–65 ℃
-
Input 9/10 current selection1 mA or 20 mA by jumpers
View all additional
Alternative Names
IS200TBAIH1CED
Mark VIe TBAIH1C terminal board
Ten-input two-output analog field termination board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IS200TBAIH1CED analog i/o terminal board
Match IS200TBAIH1CED to the installed Mark VIe TBAIH1C hardware and project. Confirm the connector layout, supplied revision and required companion parts before selecting this analog i/o terminal board.
The family documentation specifies ten analog inputs, two outputs and three DC-37 processor connections, with two twenty-four-position field terminal blocks. Jumpers select the supported input and output arrangements. The complete CED board execution, PAIC compatibility and transmitter loading must be checked against the installed hardware.
Use the applicable controlled documentation and accepted project records for IS200TBAIH1CED. Check the affected connections and validate the configured function before returning the equipment to service.
Features:
- Analog input allocation: 10 channels
- Analog output allocation: 2 channels
- Processor connector allocation: 3 DC-37 connectors
The IS200TBAIH1CED analog i/o terminal board requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IS200TBAIH1CED analog i/o terminal board
Identify the complete IS200TBAIH1CED article before exchange. Compare its label, connector arrangement and installed Mark VIe TBAIH1C role; a similar housing or related part number does not establish interchangeability.
Record the analog i/o terminal board connections and the accepted project settings. Isolate the affected circuits under the site procedure and preserve the associated wiring and configuration records.
After fitting the verified IS200TBAIH1CED, restore the accepted configuration and check the affected functions. Retain the supplied-part identity and final test record for the Mark VIe TBAIH1C equipment.
Features:
- Analog input allocation: 10 channels
- Analog output allocation: 2 channels
- Processor connector allocation: 3 DC-37 connectors
The IS200TBAIH1CED analog i/o terminal board requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IS200TBAIH1CED analog i/o terminal board must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size33 × 10 × 2.5cm
-
Shipping weight0.30kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IS200TBAIH1CED
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many analog inputs are provided by the TBAIH1C terminal board?
The applicable documentation lists 10 channels for analog input allocation. Check this value against the installed IS200TBAIH1CED configuration. -
How many analog outputs are connected through TBAI?
The applicable documentation lists 2 channels for analog output allocation. Check this value against the installed IS200TBAIH1CED configuration. -
Which processor connectors are present on TBAIH1C?
The applicable documentation lists 3 DC-37 connectors for processor connector allocation. Check this value against the installed IS200TBAIH1CED configuration. -
How are the TBAI field terminal blocks allocated?
The applicable documentation lists 2 blocks, 24 terminals each for terminal block allocation. Check this value against the installed IS200TBAIH1CED configuration. -
What largest conductor is accepted by the field terminals?
The applicable documentation lists 12 AWG for maximum terminal wire size. Check this value against the installed IS200TBAIH1CED configuration. -
Which bipolar voltage input ranges are documented for TBAI?
The applicable documentation lists ±5 V or ±10 V DC for voltage input ranges. Check this value against the installed IS200TBAIH1CED configuration. -
Which PAIC arrangement should be recorded before ordering the TBAI spare?
Specify IS200TBAIH1CED, the installed PAIC identities and simplex or TMR configuration. Include jumper and field-terminal photographs. -
Which board-specific incoming checks are needed for TBAIH1CED?
Compare the full CED label, DC-37 connections, field blocks and jumper arrangement with the original terminal board and accepted PAIC configuration.
READY TO VERIFY YOUR PART?
Get a IS200TBAIH1CED quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IS200TBAIH1CEDAnalog I/O Terminal BoardManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
