PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC694MDL758 Positive Logic Digital Output Module
IC694MDL758 is a Positive Logic Digital Output Module in the PACSystems RX3i family. It provides positive-logic transistor outputs for compatible RX3i digital I/O configurations.
Thirty-two outputs are divided into two groups of sixteen, with electronic short-circuit protection per group. The module drives DC field loads and receives logic power from the backplane. A separately selected high-density terminal block carries the field connections.
Thirty-two outputs are divided into two groups of sixteen, with electronic short-circuit protection per group. The module drives DC field loads and receives logic power from the backplane. A separately selected high-density terminal block carries the field connections.
BEFORE YOU BUY
Confirm the complete positive logic digital output module
ACTUAL APPLICATIONS
Application context for IC694MDL758
IC694MDL758 is a Positive Logic Digital Output Module for compatible PACSystems RX3i configurations. It suits water & wastewater, industrial manufacturing, chemical processing. Match the installed revision, interfaces and electrical ratings before use.
-
01 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Municipal Drinking Water TreatmentIndustrial Wastewater Treatment Processes -
02 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Industrial Production and AssemblyManufacturing Process Automation -
03 · CHEMICAL PROCESSING
Chemical Manufacturing and Process Production
Industrial Chemical ProductionChemical Processing and Formulation
Technical specifications for IC694MDL758
-
Product ModelIC694MDL758
-
Product ParametersPositive Logic Digital Output Module
-
In stock7 units
-
ManufacturerGeneral Electric
-
Digital output count32
-
Nominal output voltage12/24 V DC
-
Output current per point0.50 A
-
Output grouping2 groups of 16
-
ON response time0.5 ms
-
OFF response time0.5 ms
-
5 V backplane current250 mA
-
Output switching elementTransistor
-
Output polarityPositive logic
-
Short-circuit protectionElectronic; per 16-point group
-
Backplane slot occupancy1
-
Terminal block optionsIC694TBBx32 or IC694TBSx32; separate
View all additional
Alternative Names
IC694MDL758
PACSystems RX3i Positive Logic Digital Output Module
RX3i 32 digital output count
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC694MDL758 positive logic digital output module
IC694MDL758 belongs to the PACSystems RX3i platform and serves as a Positive Logic Digital Output Module. Match the complete article code and installed hardware revision before using the applicable manufacturer documentation.
The documented digital output count is 32; nominal output voltage is 12/24 V DC. Compare these requirements and the remaining electrical or interface ratings with the existing configuration. Confirm terminal allocation, compatible carriers or backplanes and power budget before connection.
Follow the applicable GE Intelligent Platforms PACSystems RX3i catalog, discrete output modules, page 1.25 instructions for IC694MDL758. Verify configuration, communication or I/O response as appropriate to this positive logic digital output module, and retain the final configuration and acceptance results with the asset record.
Features:
- Digital output count: 32
- Nominal output voltage: 12/24 V DC
- Output current per point: 0.50 A
The IC694MDL758 positive logic digital output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC694MDL758 positive logic digital output module
Replace IC694MDL758 only after matching its full article code, PACSystems RX3i role and documented hardware revision. Similar housings or related catalog numbers do not establish interchangeability; verify the relevant connections, electrical ratings and configuration requirements.
Before removing IC694MDL758, record its label, connector positions, terminal assignments and existing configuration. Photograph adjacent modules, cable routing and grounding, isolate the applicable supplies and preserve any controller configuration needed for this positive logic digital output module.
After fitting the verified IC694MDL758 article, restore the documented connections and configuration. Inspect status indications, check the affected I/O or communication path at a safe operating point and retain the acceptance record for the PACSystems RX3i installation.
Features:
- Digital output count: 32
- Nominal output voltage: 12/24 V DC
- Output current per point: 0.50 A
The IC694MDL758 positive logic digital output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC694MDL758 positive logic digital output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.6 × 13.4 × 13.7cm
-
Shipping weight0.25kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC694MDL758
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which digital output count is specified for IC694MDL758?
For IC694MDL758, digital output count is 32 under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
How is nominal output voltage defined for IC694MDL758?
For IC694MDL758, nominal output voltage is 12/24 V DC under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What value applies to IC694MDL758 for output current per point?
For IC694MDL758, output current per point is 0.50 A under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What does the documentation state about output grouping on IC694MDL758?
For IC694MDL758, output grouping is 2 groups of 16 under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
For IC694MDL758, what is the specified on response time?
For IC694MDL758, on response time is 0.5 ms under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What is the documented off response time for IC694MDL758?
For IC694MDL758, off response time is 0.5 ms under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What purchase information is needed for IC694MDL758 positive logic digital output module?
Specify IC694MDL758 in full, including every revision suffix, and verify the supplied article label, condition, included accessories and quotation. For this PACSystems RX3i item, related base numbers are not automatic substitutes. -
What should be documented when replacing IC694MDL758 positive logic digital output module?
For IC694MDL758, retain the label photographs, connection assignments, installed hardware revision and applicable PACSystems RX3i configuration. Restore these records and perform the documented functional checks after replacement.
READY TO VERIFY YOUR PART?
Get a IC694MDL758 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
