PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695ALG704 Analog Current/Voltage Output Module
IC695ALG704 is a four-channel analog current/voltage output module for GE PACSystems RX3i controllers. It provides configurable analog signals for compatible process actuators and machine control circuits.
Each channel can be configured for bipolar or unipolar voltage, or for a 0–20 mA or 4–20 mA current signal. The module receives output values through the backplane and converts them into field signals using external DC power. Floating-point and integer data formats, configured output defaults and channel diagnostics support the selected controller configuration.
Each channel can be configured for bipolar or unipolar voltage, or for a 0–20 mA or 4–20 mA current signal. The module receives output values through the backplane and converts them into field signals using external DC power. Floating-point and integer data formats, configured output defaults and channel diagnostics support the selected controller configuration.
BEFORE YOU BUY
Confirm the complete analog current/voltage output module
ACTUAL APPLICATIONS
Application context for IC695ALG704
IC695ALG704 supplies configurable current or voltage outputs within compatible RX3i systems for water treatment, chemical manufacturing and industrial production. Signal range, external field power and the connected load must match the selected channel configuration.
-
01 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Water Purification and TreatmentWastewater Treatment and Processing -
02 · CHEMICAL PROCESSING
Chemical Manufacturing and Process Production
Chemical Production and ProcessingIndustrial Chemical Formulation Processes -
03 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Manufacturing Process AutomationIndustrial Production and Assembly
Technical specifications for IC695ALG704
-
Product ModelIC695ALG704
-
Product ParametersAnalog Current/Voltage Output Module
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Output channels4
-
Voltage ranges±10 V or 0 to 10 V
-
Current ranges0 to 20 mA or 4 to 20 mA
-
External field supply19.2 to 30 V DC
-
External supply current150 mA maximum
-
3.3 V backplane current375 mA
-
Power dissipation4.8 W maximum
-
Data formatIEEE 32-bit floating-point or 16-bit integer in 32-bit field
-
Current output load850 ohm maximum at 20 V field supply
-
Voltage output load2000 ohm minimum
-
Voltage resolution15.9 bit at ±10 V; 14.9 bit at 0 to 10 V
-
Current resolution15.9 bit at 0 to 20 mA; 15.6 bit at 4 to 20 mA
-
Accuracy±0.15% full scale at 25℃; ±0.30% at 60℃
-
Settling time2 ms to 95% of final value
-
Field-to-backplane isolation2550 V DC for 1 second
View all additional
Alternative Names
IC695ALG704
PACSystems RX3i Analog Current/Voltage Output Module
RX3i 4 output channels
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC695ALG704 analog current/voltage output module
IC695ALG704 is an analog current/voltage output module in the PACSystems RX3i platform. Match the exact article and hardware revision to the installed backplane and controller configuration before allocating channels, connections or network resources.
Compare output channels (4), voltage ranges (±10 V or 0 to 10 V) and current ranges (0 to 20 mA or 4 to 20 mA) with the project requirements. Use the applicable terminal assignments, power budget and grounding requirements from the manufacturer documentation.
Configure the supported operating modes for IC695ALG704, then verify the affected signals or communications in the approved controller project. Record configuration changes, diagnostic results and the completed functional checks with the equipment record.
Features:
- Output channels: 4
- Voltage ranges: ±10 V or 0 to 10 V
- Current ranges: 0 to 20 mA or 4 to 20 mA
The IC695ALG704 analog current/voltage output module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC695ALG704 analog current/voltage output module
Replace IC695ALG704 after comparing the complete label, hardware revision and PACSystems RX3i role with the installed article. Confirm connector allocation and the supported controller configuration before exchanging the module.
Preserve the controller project and relevant channel or communication settings before removing IC695ALG704. Photograph field connections and grounding, identify connected circuits, and isolate the required power supplies according to the manufacturer procedure.
Restore the approved configuration after fitting IC695ALG704. Check module status indications, the affected I/O or network connections and the required operating responses, then retain the replacement identity and final acceptance results.
Features:
- Output channels: 4
- Voltage ranges: ±10 V or 0 to 10 V
- Current ranges: 0 to 20 mA or 4 to 20 mA
The IC695ALG704 analog current/voltage output module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC695ALG704 analog current/voltage output module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.4 × 13.5 × 13.7cm
-
Shipping weight0.20kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695ALG704
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can the four analog outputs use different current or voltage ranges?
Yes. Each IC695ALG704 channel is individually configured for a supported voltage or current range. -
Which current loop ranges are available for process signals?
The current ranges are 0 to 20 mA and 4 to 20 mA. -
What external field voltage does the analog output module require?
Use a field supply within 19.2 to 30 V DC, allowing for the documented output load requirements. -
What is the current-output load limit at a 20 V supply?
The maximum current-output load is 850 ohm at a 20 V external supply. -
Does the four-channel model require the eight-channel current derating table?
The cited manual states that IC695ALG704 has no thermal derating; do not apply the IC695ALG708 current-mode table to it. -
How are analog output values represented in the controller?
Use IEEE 32-bit floating-point or a 16-bit integer value in a 32-bit field according to the channel configuration. -
What analog-loop details are needed for an ALG704 purchasing request?
Provide the exact article, quantity, desired ranges, field supply and terminal-block arrangement. -
What should be compared before accepting an analog-output spare?
Check the IC695ALG704 label, connector condition and terminal arrangement against the approved range and configuration requirements.
READY TO VERIFY YOUR PART?
Get a IC695ALG704 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
