PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE PACSystems RX3i
- IC695PBS301-AA
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695PBS301-AA PROFIBUS DP Slave Module
IC695PBS301-AA is a PROFIBUS DP slave module for GE PACSystems RX3i controllers. It exchanges configured data between an RX3i system and a PROFIBUS network master.
A nine-pin sub-D connector provides the PROFIBUS interface, while the RX3i backplane supplies power and exchanges controller data. The module supports up to 244 input bytes and 244 output bytes, standard PROFIBUS data rates and DP-V1 services. Three status LEDs and a slave status word indicate module and network conditions; it operates as a slave rather than a bus master.
A nine-pin sub-D connector provides the PROFIBUS interface, while the RX3i backplane supplies power and exchanges controller data. The module supports up to 244 input bytes and 244 output bytes, standard PROFIBUS data rates and DP-V1 services. Three status LEDs and a slave status word indicate module and network conditions; it operates as a slave rather than a bus master.
BEFORE YOU BUY
Confirm the complete profibus dp slave module
ACTUAL APPLICATIONS
Application context for IC695PBS301-AA
IC695PBS301-AA exchanges PROFIBUS slave data in compatible RX3i systems for water treatment, chemical processing and industrial manufacturing. The master configuration, assigned data sizes, baud rate and complete module revision must match the installed network.
-
01 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Drinking Water Treatment ProcessesMunicipal Wastewater Treatment Processes -
02 · CHEMICAL PROCESSING
Chemical Manufacturing and Process Production
Industrial Chemical ProductionChemical Processing and Formulation -
03 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Automated Manufacturing and ProductionFactory Production and Assembly
Technical specifications for IC695PBS301-AA
-
Product ModelIC695PBS301-AA
-
Product ParametersPROFIBUS DP Slave Module
-
In stock7 units
-
ManufacturerGeneral Electric
-
PROFIBUS roleDP slave
-
Input data capacity244 bytes maximum
-
Output data capacity244 bytes maximum
-
Acyclic servicesDP-V1 Read, Write and Alarm
-
Network connector1 × 9-pin sub-D
-
3.3 V backplane current440 mA
-
PROFIBUS rates9.6/19.2/93.75/187.5/500 kbps; 1.5/3/6/12 Mbps
-
Status indicators3 PROFIBUS-compliant LEDs
-
Status dataSlave Status Word
-
Backplane interfaceRX3i universal backplane
-
Bus accessSlave responses to master requests; no bus access rights
-
Hot insertionSupported in an RX3i universal backplane
View all additional
Alternative Names
IC695PBS301-AA
PACSystems RX3i PROFIBUS DP Slave Module
RX3i DP slave profibus role
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC695PBS301-AA profibus dp slave module
IC695PBS301-AA is a profibus dp slave module in the PACSystems RX3i platform. Match the exact article and hardware revision to the installed backplane and controller configuration before allocating channels, connections or network resources.
Compare profibus role (DP slave), input data capacity (244 bytes maximum) and output data capacity (244 bytes maximum) with the project requirements. Use the applicable terminal assignments, power budget and grounding requirements from the manufacturer documentation.
Configure the supported operating modes for IC695PBS301-AA, then verify the affected signals or communications in the approved controller project. Record configuration changes, diagnostic results and the completed functional checks with the equipment record.
Features:
- PROFIBUS role: DP slave
- Input data capacity: 244 bytes maximum
- Output data capacity: 244 bytes maximum
The IC695PBS301-AA profibus dp slave module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC695PBS301-AA profibus dp slave module
Replace IC695PBS301-AA after comparing the complete label, hardware revision and PACSystems RX3i role with the installed article. Confirm connector allocation and the supported controller configuration before exchanging the module.
Preserve the controller project and relevant channel or communication settings before removing IC695PBS301-AA. Photograph field connections and grounding, identify connected circuits, and isolate the required power supplies according to the manufacturer procedure.
Restore the approved configuration after fitting IC695PBS301-AA. Check module status indications, the affected I/O or network connections and the required operating responses, then retain the replacement identity and final acceptance results.
Features:
- PROFIBUS role: DP slave
- Input data capacity: 244 bytes maximum
- Output data capacity: 244 bytes maximum
The IC695PBS301-AA profibus dp slave module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC695PBS301-AA profibus dp slave module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.5 × 13.5 × 13.6cm
-
Shipping weight0.16kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695PBS301-AA
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the PBS301 module act as the PROFIBUS bus master?
No. It is a DP slave with no bus access rights and responds to the configured master. -
What is the largest PROFIBUS input data allocation?
The module supports up to 244 input bytes from the network. -
What is the maximum output data sent to the network master?
It supports up to 244 output bytes. -
Which acyclic DP services are available on the slave module?
The documented services are DP-V1 Read, Write and Alarm messages. -
What physical connector is used for the PROFIBUS bus?
A nine-pin sub-D connector is provided for the PROFIBUS cable. -
Where can the controller obtain slave diagnostic status?
The module provides a Slave Status Word and three PROFIBUS-compliant status LEDs. -
Which network-master details should accompany an AA spare order?
Provide the full IC695PBS301-AA article, master configuration, data sizes and requested quantity. -
What PROFIBUS hardware should be checked during incoming inspection?
Compare the AA label, sub-D connector and housing condition with the ordered module and the installed network requirements.
READY TO VERIFY YOUR PART?
Get a IC695PBS301-AA quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
