PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695PSA140E Multipurpose AC/DC Power Supply
IC695PSA140E is a Multipurpose AC/DC Power Supply in the PACSystems RX3i family. It powers a compatible RX3i universal backplane and supports properly configured load-sharing or redundancy arrangements.
The supply converts AC or DC input into the three backplane voltage rails, with a combined forty-watt limit and temperature-dependent derating. Up to four compatible multipurpose supplies may be used in supported configurations. Wiring polarity, grounding and power budget must match the selected arrangement.
The supply converts AC or DC input into the three backplane voltage rails, with a combined forty-watt limit and temperature-dependent derating. Up to four compatible multipurpose supplies may be used in supported configurations. Wiring polarity, grounding and power budget must match the selected arrangement.
BEFORE YOU BUY
Confirm the complete multipurpose ac/dc power supply
ACTUAL APPLICATIONS
Application context for IC695PSA140E
IC695PSA140E is a Multipurpose AC/DC Power Supply for compatible PACSystems RX3i configurations. It suits water & wastewater, industrial manufacturing, chemical processing. Match the installed revision, interfaces and electrical ratings before use.
-
01 · WATER & WASTEWATER
Water Treatment and Wastewater Processing
Municipal Drinking Water TreatmentIndustrial Wastewater Treatment Processes -
02 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Production Automation
Industrial Production and AssemblyManufacturing Process Automation -
03 · CHEMICAL PROCESSING
Chemical Manufacturing and Process Production
Industrial Chemical ProductionChemical Processing and Formulation
Technical specifications for IC695PSA140E
-
Product ModelIC695PSA140E
-
Product ParametersMultipurpose AC/DC Power Supply
-
In stock6 units
-
ManufacturerGeneral Electric
-
Nominal input voltage120/240 V AC or 125 V DC
-
AC input range85 to 264 V AC
-
DC input range100 to 300 V DC
-
Input power70 W maximum at full load
-
Inrush current4 A; 250 ms maximum
-
Total output power40 W maximum; temperature derating applies
-
5.1 V rail power30 W maximum
-
3.3 V rail power30 W maximum
-
24 V output range19.2 to 28.8 V DC
-
5.1 V output range5.0 to 5.2 V DC
-
3.3 V output range3.1 to 3.5 V DC
-
Rail current limits24 V: 1.6 A; 5.1 V: 6 A; 3.3 V: 9 A
-
Input-to-backplane isolation250 V AC continuous; 1500 V AC for 1 minute
-
Ride-through time20 ms
-
Terminal conductor gauge14 to 22 AWG; one wire per terminal
View all additional
Alternative Names
IC695PSA140E
PACSystems RX3i Multipurpose AC/DC Power Supply
RX3i 120/240 V AC or 125 V DC nominal input voltage
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IC695PSA140E multipurpose ac/dc power supply
IC695PSA140E belongs to the PACSystems RX3i platform and serves as a Multipurpose AC/DC Power Supply. Match the complete article code and installed hardware revision before using the applicable manufacturer documentation.
The documented nominal input voltage is 120/240 V AC or 125 V DC; ac input range is 85 to 264 V AC. Compare these requirements and the remaining electrical or interface ratings with the existing configuration. Confirm terminal allocation, compatible carriers or backplanes and power budget before connection.
Follow the applicable GE Fanuc GFK-2399A, RX3i multipurpose 40-watt AC/DC power supply instructions for IC695PSA140E. Verify configuration, communication or I/O response as appropriate to this multipurpose ac/dc power supply, and retain the final configuration and acceptance results with the asset record.
Features:
- Nominal input voltage: 120/240 V AC or 125 V DC
- AC input range: 85 to 264 V AC
- DC input range: 100 to 300 V DC
The IC695PSA140E multipurpose ac/dc power supply requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IC695PSA140E multipurpose ac/dc power supply
Replace IC695PSA140E only after matching its full article code, PACSystems RX3i role and documented hardware revision. Similar housings or related catalog numbers do not establish interchangeability; verify the relevant connections, electrical ratings and configuration requirements.
Before removing IC695PSA140E, record its label, connector positions, terminal assignments and existing configuration. Photograph adjacent modules, cable routing and grounding, isolate the applicable supplies and preserve any controller configuration needed for this multipurpose ac/dc power supply.
After fitting the verified IC695PSA140E article, restore the documented connections and configuration. Inspect status indications, check the affected I/O or communication path at a safe operating point and retain the acceptance record for the PACSystems RX3i installation.
Features:
- Nominal input voltage: 120/240 V AC or 125 V DC
- AC input range: 85 to 264 V AC
- DC input range: 100 to 300 V DC
The IC695PSA140E multipurpose ac/dc power supply requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IC695PSA140E multipurpose ac/dc power supply must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size7 × 13.4 × 12.9cm
-
Shipping weight0.54kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504409999
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695PSA140E
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the documentation state about nominal input voltage on IC695PSA140E?
For IC695PSA140E, nominal input voltage is 120/240 V AC or 125 V DC under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
For IC695PSA140E, what is the specified ac input range?
For IC695PSA140E, ac input range is 85 to 264 V AC under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What is the documented dc input range for IC695PSA140E?
For IC695PSA140E, dc input range is 100 to 300 V DC under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
Which input power is specified for IC695PSA140E?
For IC695PSA140E, input power is 70 W maximum at full load under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
How is inrush current defined for IC695PSA140E?
For IC695PSA140E, inrush current is 4 A; 250 ms maximum under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What value applies to IC695PSA140E for total output power?
For IC695PSA140E, total output power is 40 W maximum; temperature derating applies under the applicable manufacturer specification. Check the complete hardware revision before applying this value to the installed PACSystems RX3i configuration. -
What should the quotation identify for IC695PSA140E multipurpose ac/dc power supply?
Specify IC695PSA140E in full, including every revision suffix, and verify the supplied article label, condition, included accessories and quotation. For this PACSystems RX3i item, related base numbers are not automatic substitutes. -
Which installed details must be retained for an exchange of IC695PSA140E multipurpose ac/dc power supply?
For IC695PSA140E, retain the label photographs, connection assignments, installed hardware revision and applicable PACSystems RX3i configuration. Restore these records and perform the documented functional checks after replacement.
READY TO VERIFY YOUR PART?
Get a IC695PSA140E quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
