PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IC695SPF002B RX3i 100BASE-FX Multimode SFP Transceiver
GE IC695SPF002B is a RX3i 100BASE-FX Multimode SFP Transceiver for GE PACSystems RX3i. According to the applicable product documentation, ethernet standard is 100BASE-FX, data rate is 100 Mbit/s, optical reach is 2 km maximum, and fiber type is Multimode fiber. Confirm the complete article code and installed hardware revision before replacement.
BEFORE YOU BUY
Confirm the complete RX3i 100BASE-FX Multimode SFP Transceiver
ACTUAL APPLICATIONS
Application context for IC695SPF002B
Official manufacturer documentation supports these system uses when the complete GE PACSystems RX3i configuration is verified.
-
01 · WATER & WASTEWATER
Remote station data communications
Industrial Ethernet SystemsPLC and remote I/O nodesFiber or copper network uplinks -
02 · OIL & GAS
Pipeline control network integration
Process Communication SystemsCompressor and metering stationsControl-room network switches -
03 · AUTOMOTIVE
Production cell controller networking
Factory Communication SystemsRobot and PLC controllersHMI and supervisory network links
Technical specifications for IC695SPF002B
-
Product ModelIC695SPF002B
-
Product ParametersRX3i 100BASE-FX Multimode SFP Transceiver
-
In stock1 unit
-
ManufacturerGeneral Electric
-
Ethernet Standard100BASE-FX
-
Data Rate100 Mbit/s
-
Optical Reach2 km maximum
-
Fiber TypeMultimode fiber
-
Optical Wavelength1310 nm nominal
-
Optical ConnectorDuplex LC
-
Form FactorSmall Form-factor Pluggable (SFP)
-
Duplex ModeFull duplex
-
System CompatibilityPACSystems RX3i Ethernet fiber interfaces
View all additional
Alternative Names
IC695SPF002B 100Base-FX SFP
RX3i multimode fiber SFP
GE 2 km optical transceiver
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match IC695SPF002B to the installed GE PACSystems RX3i
GE IC695SPF002B is a 100Base-FX SFP transceiver for the GE PACSystems RX3i. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare fiber type (Multimode fiber), optical wavelength (1310 nm nominal) and optical connector (Duplex LC) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: IC695SPF002B
- Product class: 100Base-FX SFP transceiver
- Family: GE PACSystems RX3i
The GE IC695SPF002B requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete IC695SPF002B identity before exchange
Replace IC695SPF002B only after matching the complete article code, 100Base-FX SFP transceiver, installed GE PACSystems RX3i role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: IC695SPF002B
- Product class: 100Base-FX SFP transceiver
- Family check: GE PACSystems RX3i
The GE IC695SPF002B requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for IC695SPF002B
- GE GE PACSystems RX3i references reviewed
- Exact GE identity required before service
Documentation for GE IC695SPF002B must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size15 × 10 × 5 cm
-
Shipping weight0.20 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85176299
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IC695SPF002B
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which fiber link does IC695SPF002B support?
IC695SPF002B supports 100BASE-FX communication over multimode fiber for links up to 2 km. -
What connector should maintenance prepare for IC695SPF002B?
Prepare a clean duplex LC multimode-fiber patch lead and confirm both transmit and receive fibers are correctly assigned. -
Can IC695SPF002B be used on single-mode fiber?
No. This article is specified for multimode 100BASE-FX service; use the documented single-mode SFP when the installed fiber is single-mode. -
What should be checked when an IC695SPF002B link stays down?
Check the exact SFP code, fiber type, LC connector cleanliness, transmit/receive polarity, remote-port speed and the 2 km distance limit. -
How should IC695SPF002B be handled during replacement?
Use ESD controls, protect the optical face from dust, avoid touching the connector ferrules and keep the port cap fitted until connection. -
What network speed must match IC695SPF002B?
Both ends must support a 100 Mbit/s 100BASE-FX optical link; a gigabit-only optical interface is not an equivalent replacement. -
What should a distributor quote with IC695SPF002B?
Quote the complete IC695SPF002B article code, 100BASE-FX interface, multimode fiber, duplex LC connection and 2 km optical reach. -
How should MRO teams verify delivered IC695SPF002B?
Confirm the IC695SPF002B label, SFP form factor and sealed optical interfaces, then record the package and article code before stocking.
READY TO VERIFY YOUR PART?
Get a IC695SPF002B quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
