PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- FGN36AA630NNF FGN306F630NF
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
FGN36AA630NNF FGN306F630NF FGN molded-case circuit breaker
GE FGN36AA630NNF FGN306F630NF is a three-pole molded-case circuit breaker rated at 630 A. It is intended for 50/60 Hz electrical distribution and has a manual toggle operating mechanism.
The breaker uses bolted line and load terminal connections. The complete FGN36AA630NNF and FGN306F630NF markings must be checked against the supplied breaker before its trip characteristics or accessory configuration are specified.
The breaker uses bolted line and load terminal connections. The complete FGN36AA630NNF and FGN306F630NF markings must be checked against the supplied breaker before its trip characteristics or accessory configuration are specified.
BEFORE YOU BUY
Confirm the complete FGN36AA630NNF FGN306F630NF identity
ACTUAL APPLICATIONS
Application fields for FGN36AA630NNF FGN306F630NF
Three model-specific application areas are listed for FGN36AA630NNF FGN306F630NF, with two related application fields under each heading.
-
01 · COMMERCIAL BUILDINGS
Institutional and Commercial Property Infrastructure
Commercial property development and retail infrastructureInstitutional buildings and public infrastructure areas -
02 · INDUSTRIAL MANUFACTURING
Industrial Production and Component Manufacturing
Discrete manufacturing and industrial assembly productionContinuous materials production and component fabrication -
03 · ELECTRIC UTILITIES
Electricity Distribution and Grid Infrastructure
Regional electricity distribution and utility infrastructurePower transmission and public energy distribution
Technical specifications for FGN36AA630NNF FGN306F630NF
-
Product ModelFGN36AA630NNF FGN306F630NF
-
Spare ModelFGN306F630NF
-
Product ParametersFGN molded-case circuit breaker
-
ManufacturerGeneral Electric
-
Pole count3
-
Rated current630 A
-
Device typeMolded-case circuit breaker
-
Frequency class50 / 60 Hz
-
Operating mechanismManual toggle
-
Terminal connectionBolted
View all additional
Alternative Names
FGN36AA630NNF / FGN306F630NF
GE FGN industrial circuit protection FGN molded-case circuit breaker
GE FGN molded-case circuit breaker
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate FGN36AA630NNF FGN306F630NF with the documented configuration
Match the complete FGN36AA630NNF and FGN306F630NF identity, three-pole construction and 630 A current rating. The FGN36AA630NNF FGN306F630NF is a three-pole, 630 A molded-case breaker.
Confirm panel mounting, terminal orientation, conductor size, upstream coordination and available fault current before installation. Confirm its 50/60 Hz service, manual toggle and bolted terminal configuration against the installed unit.
Verify clearance, insulation, operating mechanism and protection settings through the approved commissioning procedure.
Features:
- Exact FGN36AA630NNF FGN306F630NF identity
- 630 A three-pole circuit protection
- bolted line and load terminals
Use the complete FGN36AA630NNF FGN306F630NF identity and its documented electrical and interface values when integrating the FGN molded-case circuit breaker. Verify the installed configuration before commissioning.
INTERCHANGEABILITY
Verify FGN36AA630NNF FGN306F630NF before replacement
Photograph the full breaker label, trip designation, terminal arrangement, handle orientation and installed accessories. The FGN36AA630NNF FGN306F630NF is a three-pole, 630 A molded-case breaker.
A visually similar FGN breaker is not automatically interchangeable; compare current rating, poles, frame and interrupting class. Confirm its 50/60 Hz service, manual toggle and bolted terminal configuration against the installed unit.
After replacement, torque terminals, perform insulation and mechanical checks, then test coordinated protection before energizing the feeder.
Features:
- Complete label and revision
- Recorded wiring and configuration
- Controlled post-installation functional test
Match the complete FGN36AA630NNF FGN306F630NF marking and the installed configuration before replacement. Preserve the approved settings and verify the relevant electrical and interface functions after installation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Exact-model technical data for FGN36AA630NNF FGN306F630NF
- Applicable GE documentation
- Directory links by subcategory and brand
Documentation for FGN36AA630NNF FGN306F630NF must be matched to the complete article identity and installed configuration before use.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 21 × 12 cm
-
Shipping weight6.8 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85362000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about FGN36AA630NNF FGN306F630NF
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is this a three-pole breaker?
The documented FGN36 configuration has three poles. Verify all three terminals and the complete frame marking. -
What rated current is shown for this configuration?
630 A is recorded for the referenced breaker. Confirm the supplied-unit nameplate and trip configuration before ordering. -
Are FGN36AA630NNF and FGN306F630NF interchangeable names?
Do not assume so from the shortened code. Request photographs showing both markings and the complete installed breaker identity. -
Which supply frequency applies?
The available technical record identifies 50/60 Hz. Check the actual nameplate and application voltage separately. -
How is the breaker operated?
The identified operating mechanism is a manual toggle. Confirm any installed handle or interlock accessory. -
What terminal style should be matched?
Bolted terminal connections are recorded. Compare lug hardware and cable arrangement before exchange. -
What is outside the basic breaker quote?
Trip units, auxiliary contacts, shunt trips and handle accessories should be listed explicitly if required. -
Which photographs are needed for procurement?
Request front and side nameplates, trip-unit marking, terminal layout and accessory labels.
READY TO VERIFY YOUR PART?
Get a FGN36AA630NNF FGN306F630NF quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
FGN36AA630NNF FGN306F630NFFGN molded-case circuit breakerManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
