PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
FC-MCAR-02 FSC mounting carrier
Honeywell FC-MCAR-02 is a FSC mounting carrier in the Honeywell Fail Safe Controller hardware. It is used to perform the documented FSC mounting carrier function in the installed automation equipment.
Its documented configuration includes model number of FC-MCAR-02, carrier length of 36 inch class, supply voltage of 24 V DC -15% / +30%, and supply rail current of 40 A maximum. During operation, the FSC mounting carrier performs its assigned FSC mounting carrier function through the documented power, signal and communication interfaces.
Its documented configuration includes model number of FC-MCAR-02, carrier length of 36 inch class, supply voltage of 24 V DC -15% / +30%, and supply rail current of 40 A maximum. During operation, the FSC mounting carrier performs its assigned FSC mounting carrier function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete FSC mounting carrier
ACTUAL APPLICATIONS
Where FC-MCAR-02 Fits Across Major Industry Sectors
Uses span gas, power and pharmaceuticals, subject to verified compatibility, operating conditions and project requirements.
- 01 · OIL & GAS
Petroleum Refining and Commercial Natural Gas Processing
Petroleum refining for commercial fuel and petrochemical material production.Natural gas liquefaction and processing for commercial energy supply. - 02 · POWER GENERATION
Electricity Generation and Industrial Energy Production Operations
Fossil fuel power generation for regional electricity supply markets.Industrial electricity production for continuous manufacturing and processing operations. - 03 · PHARMACEUTICAL MANUFACTURING
Pharmaceutical Production and Commercial Life Science Manufacturing
Pharmaceutical material processing and formulation for commercial medicine production.Life science product manufacturing for healthcare and pharmaceutical markets.
Technical specifications for FC-MCAR-02
-
Product ModelFC-MCAR-02
-
Product ParametersFSC mounting carrier
-
In stock1 unit
-
ManufacturerHoneywell
-
Model NumberFC-MCAR-02
-
Carrier Length36 inch class
-
Supply Voltage24 V DC -15% / +30%
-
Supply Rail Current40 A maximum
-
Module Supply CurrentNone passive carrier
-
Operating Temperature-40 to +70 °C
-
Storage Temperature-40 to +85 °C
-
Relative Humidity10 to 95% noncondensing
-
Mounting TypeFSC cabinet carrier
-
Module InterfaceFSC backplane connectors
-
Power DistributionDual 24 V DC rails
-
GroundingCarrier protective-earth point
-
Connector KeyingSlot-specific keying
-
Installed RoleFSC module support
-
Redundancy SupportController-dependent configuration
View all additional
Alternative Names
FC MCAR 02
Honeywell Fail Safe Controller hardware FSC mounting carrier
Honeywell FSC mounting carrier
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match FC-MCAR-02 to the installed Honeywell Fail Safe Controller hardware
Honeywell FC-MCAR-02 is a FSC mounting carrier used in the Honeywell Fail Safe Controller hardware. Use FC-MCAR-02 as the FSC mounting carrier in the Honeywell Fail Safe Controller hardware. Confirm supply voltage 24 V DC -15% / +30% and the exact installed arrangement before connection.
Record the product label, mounting type (FSC cabinet carrier), cable identification, grounding and adjacent hardware before removing the installed unit. Confirm none passive carrier, -40 to +70 °c, the exact mechanical position and the approved system configuration before connection.
After installation, verify installed role (FSC module support), check diagnostics and test the affected function before returning the equipment to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: FC-MCAR-02
- Product class: FSC mounting carrier
- Family: Honeywell Fail Safe Controller hardware
The Honeywell FC-MCAR-02 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete FC-MCAR-02 identity before exchange
Replace FC-MCAR-02 only after matching the full article identity, FSC mounting carrier, installed 10 to 95% noncondensing and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, fsc backplane connectors, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete controller-dependent configuration. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: FC-MCAR-02
- Connection: FSC backplane connectors
- Test: Controller-dependent configuration
The Honeywell FC-MCAR-02 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for FC-MCAR-02
- Installation checks matched to Honeywell Fail Safe Controller hardware
- Exact Honeywell identity required before service
Documentation for Honeywell FC-MCAR-02 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about FC-MCAR-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which supply voltage must engineering verify for FC-MCAR-02?
For FC-MCAR-02, verify the documented supply voltage is 24 V DC -15% / +30% and confirm the remaining nameplate limits before connection. -
How should maintenance document the mounting type before removing FC-MCAR-02?
Photograph the mounting type, which is FSC cabinet carrier, plus terminal labels, cable routing, shields and adjacent hardware for FC-MCAR-02. -
What does the carrier length value mean when sourcing FC-MCAR-02?
The exact documented value for FC-MCAR-02 is 36 inch class; use it with the full article code when checking the supplied configuration. -
Which module supply current limit applies during commissioning of FC-MCAR-02?
Apply None passive carrier for module supply current on FC-MCAR-02; also confirm protection, polarity and the approved startup procedure. -
Can a distributor quote FC-MCAR-02 from a shortened code?
No. Quote the complete identity FC-MCAR-02, manufacturer, quantity, destination, product photos and required documentation scope. -
What receiving inspection is appropriate for the FSC mounting carrier FC-MCAR-02?
Inspect FC-MCAR-02 for the full label, connector condition, revision markings, shipping damage and consistency with Honeywell Fail Safe Controller hardware. -
Which system record should be retained after replacing FC-MCAR-02?
Retain the incoming inspection, original connection record, configuration backup, measured results and service approval for FC-MCAR-02. -
How is the restored FSC mounting carrier function tested for FC-MCAR-02?
Check status indications, diagnostics and the affected FSC mounting carrier response, then record the final result against FC-MCAR-02.
READY TO VERIFY YOUR PART?
Get a FC-MCAR-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
