PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
TK-CCR014 Redundant Net Interface Module
Honeywell TK-CCR014 is a conformally coated redundant-media ControlNet interface module for compatible Experion C200 and C200E equipment. It provides the communications interface used to connect the configured controller equipment to ControlNet.
The module occupies one chassis slot and provides two coaxial media channels for the redundant ControlNet arrangement. Documented network communication operates at 5 Mbit/s using the approved RG-6 cable and connection components. Controller release and network configuration determine the supported interface arrangement and connected I/O resources.
The module occupies one chassis slot and provides two coaxial media channels for the redundant ControlNet arrangement. Documented network communication operates at 5 Mbit/s using the approved RG-6 cable and connection components. Controller release and network configuration determine the supported interface arrangement and connected I/O resources.
BEFORE YOU BUY
Confirm the complete redundant net interface module
ACTUAL APPLICATIONS
Application context for TK-CCR014
TK-CCR014 is a redundant-media ControlNet interface for compatible Experion C200 equipment. Relevant platform settings include chemical production, refining and industrial utilities. Suitability depends on controller release, network topology, approved I/O configuration and matching redundant hardware.
-
01 · CHEMICAL PROCESSING
Chemical Manufacturing and Industrial Process Production
Industrial Chemical ManufacturingChemical Batch Process Production -
02 · REFINING
Petroleum Refining and Downstream Processing
Petroleum Refining and ProcessingDownstream Petrochemical Manufacturing -
03 · INDUSTRIAL UTILITIES
Industrial Utility Services and Process Energy Supply
Industrial Water TreatmentIndustrial Steam Energy Supply
Technical specifications for TK-CCR014
-
Product ModelTK-CCR014
-
Product ParametersRedundant Net Interface Module
-
In stock1 unit
-
ManufacturerHoneywell
-
Network ProtocolControlNet
-
Network Transmission Rate5 Mbps
-
Network Cable TypeRG-6 coaxial
-
Media Channel Count2, redundant media
-
Occupied Chassis Slots1
-
C200 Controller Chassis CNI Limit5: 1 uplink + up to 4 downlinks
-
C200E Remote Interfaces per Downlink CNIMaximum 8 uplink CNIs / gateways
-
C200E I/O Units per Downlink CNIMaximum 24, subject to module resource consumption
View all additional
Alternative Names
TK-CCR014
Honewell FSC Redundant Net Interface Module
Redundant Net Interface Module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match TK-CCR014 to the installed Honeywell FSC safety control
Honeywell TK-CCR014 is a redundant net interface module for the Honeywell FSC safety control. Its complete article identity determines the documented interface, operating role and approved host equipment.
Engineering should compare the installed interface, supply requirements, mounting, connected signals and host configuration. Confirm connectors, wiring, addressing and configuration support before connection.
Use the applicable manufacturer documentation for the complete wiring and configuration sequence. Validate communication or signal response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact product identity: TK-CCR014
- Product class: Redundant Net Interface Module
- Model-specific configuration verified
The 151X1202YE03SA04 IS200STAIH2ADC analog I/O terminal board requires appropriate configuration before system integration and commissioning.
REPLACEMENT CONTROL
Verify the complete TK-CCR014 identity before exchange
Replace TK-CCR014 only after matching the complete article code, redundant net interface module role, installed Honeywell FSC safety control equipment and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive, network or instrument configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Match the complete TK-CCR014 identity
- Compare revision, interfaces and mating hardware
- Test diagnostics and field operation before service
The 151X1202YE03SA04 IS200STAIH2ADC analog I/O terminal board requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 151X1202YE03SA04 IS200STAIH2ADC analog I/O terminal board must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size3.5 × 14 × 17.2 cm
-
Shipping weight0.25 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about TK-CCR014
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Where is TK-CCR014 used within Honeywell FSC safety control?
TK-CCR014 is used for its documented redundant net interface module role in compatible Honeywell FSC safety control equipment. Confirm the installed host and complete order identity. -
What should engineers verify before replacing TK-CCR014?
Check the complete label, hardware revision, connectors, mounting, power requirements and approved Honeywell FSC safety control configuration before removal. -
How can distributors identify the correct TK-CCR014 version?
Use the full model string, manufacturer label, suffixes, revision marks and clear nameplate photographs when preparing a quotation. -
Which compatibility details matter for this redundant net interface module?
Compatibility depends on the documented host platform, interfaces, electrical ratings, mating hardware and project configuration rather than appearance alone. -
What records should maintenance keep for TK-CCR014?
Retain terminal labels, connector orientation, wiring photographs, configuration backups, alarm records and the final functional-test result. -
Can a similar Honeywell FSC safety control part replace TK-CCR014 directly?
A similar family designation does not prove interchangeability. Compare the complete article code and applicable manufacturer documentation before substitution. -
What should be inspected when receiving TK-CCR014?
Inspect the model label, packaging, connectors, enclosure or circuit board, mounting points and included accessories for damage or mismatch. -
Which checks are required after installing TK-CCR014?
Verify power, communication or signal paths, diagnostics, alarms and the complete controlled function before returning the equipment to service.
READY TO VERIFY YOUR PART?
Get a TK-CCR014 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
