PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Honeywell
- DC1010CR-101000-E
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
DC1010CR-101000-E digital temperature controller
Honeywell DC1010CR-101000-E is a digital temperature controller documented for Honeywell DC1000 Series. It performs its assigned input, processing, operator-interface, control or cooling function through the manufacturer-specified electrical and mechanical interfaces. Verify the complete article identity and installed system configuration before replacement or commissioning.
BEFORE YOU BUY
Confirm the complete digital temperature controller
ACTUAL APPLICATIONS
Application context for DC1010CR-101000-E
Official manufacturer documentation supports these system uses when the complete Honeywell DC1000 Series configuration is verified.
-
01 · FOOD & BEVERAGE
Oven and dryer temperature panels
Temperature Control SystemsHeating zone regulationProcess temperature alarms -
02 · PLASTICS PROCESSING
Extruder barrel control panels
Heater Control SystemsBarrel temperature loopsCooling output control -
03 · MACHINE BUILDING
Thermal process equipment panels
Machine Temperature SystemsRTD process measurementRelay heater switching
Technical specifications for DC1010CR-101000-E
-
Product ModelDC1010CR-101000-E
-
Product Parametersdigital temperature controller
-
In stock1 unit
-
ManufacturerHoneywell
-
Power Supply100 to 240 V AC, 50/60 Hz
-
Maximum Consumption8 VA
-
Input TypeRTD
-
Input Points1
-
Sampling Cycle250 ms
-
Indication Accuracy±0.2% FS ±1 digit
-
Control Output 1SPDT relay, 3 A at 240 V AC
-
Alarm Output1 relay
-
PID Proportional Band0.0 to 200.0%
-
Manual LanguageEnglish
View all additional
Alternative Names
DC1010CR 101000 E
Honeywell digital temperature controller
Honeywell DC1000 Series digital temperature controller
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match DC1010CR-101000-E to the installed Honeywell DC1000 Series
Honeywell DC1010CR-101000-E is a digital temperature controller for the Honeywell DC1000 Series. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare input points (1), sampling cycle (250 ms) and indication accuracy (±0.2% FS ±1 digit) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: DC1010CR-101000-E
- Product class: digital temperature controller
- Family: Honeywell DC1000 Series
The Honeywell DC1010CR-101000-E requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete DC1010CR-101000-E identity before exchange
Replace DC1010CR-101000-E only after matching the complete article code, digital temperature controller, installed Honeywell DC1000 Series role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: DC1010CR-101000-E
- Product class: digital temperature controller
- Family check: Honeywell DC1000 Series
The Honeywell DC1010CR-101000-E requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for DC1010CR-101000-E
- Honeywell Honeywell DC1000 Series references reviewed
- Exact Honeywell identity required before service
Documentation for Honeywell DC1010CR-101000-E must match the installed equipment; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size5.0 × 5.0 × 9.7 cm
-
Shipping weight0.25 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9032899090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about DC1010CR-101000-E
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is the exact DC1010CR-101000-E identity confirmed?
Match the complete DC1010CR-101000-E code, nameplate, digital temperature controller function and installed Honeywell DC1000 Series position. -
What must be checked before connecting DC1010CR-101000-E?
Verify supply, signal type, connector or terminal assignment, companion hardware and configuration. -
Can a related family model replace DC1010CR-101000-E?
Only after the complete article code, ratings, interfaces and system compatibility are verified. -
What should be recorded before removing DC1010CR-101000-E?
Photograph labels, plugs, terminals, shields and adjacent hardware, then save the applicable settings. -
How should DC1010CR-101000-E be inspected on arrival?
Check the exact label, enclosure, connectors, accessories and transport condition. -
What checks follow installation of DC1010CR-101000-E?
Verify supply and wiring, review status indications and test every affected control or communication path. -
What is needed for a DC1010CR-101000-E quotation?
Provide the full model, quantity, nameplate photo, installed system and delivery destination. -
Which service records should be retained for DC1010CR-101000-E?
Retain inspection, connection, configuration, measurement and functional-test records.
READY TO VERIFY YOUR PART?
Get a DC1010CR-101000-E quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
