PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Honeywell
- TMG740-3 MOD 43-35
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
TMG740-3 MOD 43-35 burner control unit
Honeywell TMG740-3 MOD 43-35 burner control unit supports forced-draught and dual-fuel burner systems. Its documented hardware combines the specified signal, processing, power and connection circuits for the exact article. During operation, it performs the assigned interface or control task through the configured system path. This arrangement provides repeatable signal handling, diagnostics and operating continuity within the approved system configuration.
BEFORE YOU BUY
Confirm the complete burner control unit
ACTUAL APPLICATIONS
Application context for TMG740-3 MOD 43-35
Applications are organized by industry, operating scenario, system category and the specific equipment served.
-
01 · POWER GENERATION
Industrial Boilers and Steam Generation Burner Trains
Burner Management SystemsForced-draught burner trainsFlame detectors and fuel shutoff valves -
02 · FOOD & BEVERAGE
Direct Air Heaters and Process Drying Lines
Thermal Process Control SystemsDirect-air process heater burnersDryer flame scanners and gas valves -
03 · GLASS & CERAMICS
Kilns and High-Temperature Furnace Burner Systems
Furnace Firing SystemsHigh-temperature kiln burner trainsDual-fuel valves and ignition transformers
Technical specifications for TMG740-3 MOD 43-35
-
Product ModelTMG740-3 MOD 43-35
-
Product Parametersburner control unit
-
In stock1 unit
-
ManufacturerHoneywell
-
Supply Voltage220 / 240 V AC (-15% to +10%)
-
Supply Frequency50 Hz; 40 to 60 Hz operating range
-
Fuse Rating10 A fast or 6 A slow
-
Power ConsumptionApproximately 15 VA
-
Maximum Current per Output4 A
-
Total Output Current6 A
-
Ionisation Input Sensitivity1.6 microampere
-
UV Input Sensitivity70 microampere
-
Minimum Ionisation / IR Signal5 microampere for two LEDs
-
Minimum UV Signal250 microampere for two LEDs
-
Air Proving Switch Rating6 A at 220 V
-
Reset DelayNone
-
Ionisation Cable Length50 m normal; 100 m screened
-
UV Cable Length100 m normal; 200 m screened
-
Protection DegreeIP44
View all additional
Alternative Names
TMG740 3 MOD 43 35
Honeywell burner control unit
forced-draught and dual-fuel burner systems burner control unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match TMG740-3 MOD 43-35 to the installed forced-draught and dual-fuel burner systems
Honeywell TMG740-3 MOD 43-35 is a burner control unit for the forced-draught and dual-fuel burner systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare power consumption approx (15 VA), max. current peroutput terminal (4 A) and ionisation input (1.6 µA) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: TMG740-3 MOD 43-35
- Product class: burner control unit
- Family: forced-draught and dual-fuel burner systems
The Honeywell TMG740-3 MOD 43-35 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete TMG740-3 MOD 43-35 identity before exchange
Replace TMG740-3 MOD 43-35 only after matching the complete article code, burner control unit, installed forced-draught and dual-fuel burner systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: TMG740-3 MOD 43-35
- Product class: burner control unit
- Family check: forced-draught and dual-fuel burner systems
The Honeywell TMG740-3 MOD 43-35 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for TMG740-3 MOD 43-35
- Product family: forced-draught and dual-fuel burner systems
- Exact Honeywell identity required before service
Documentation for Honeywell TMG740-3 MOD 43-35 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size12.7 × 11.2 × 12.7 cm
-
Shipping weight0.86 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about TMG740-3 MOD 43-35
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which incoming-inspection checks apply to TMG740-3 MOD 43-35?
Inspect the TMG740-3 MOD 43-35 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same forced-draught and dual-fuel burner systems family directly replace TMG740-3 MOD 43-35?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing TMG740-3 MOD 43-35?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting TMG740-3 MOD 43-35. -
Which configuration data should be backed up before exchanging TMG740-3 MOD 43-35?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission TMG740-3 MOD 43-35 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected burner control unit function at a safe operating point. -
What service evidence should be retained after work on TMG740-3 MOD 43-35?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for TMG740-3 MOD 43-35. -
Which nameplate details identify the correct TMG740-3 MOD 43-35 for a distributor quotation?
Quote TMG740-3 MOD 43-35 with the complete suffix, burner control unit, forced-draught and dual-fuel burner systems, quantity and clear nameplate photographs. -
What should engineering compare before integrating TMG740-3 MOD 43-35 into the installed system?
Compare the documented forced-draught and dual-fuel burner systems role, supply class, communication or signal interface, firmware or hardware revision and companion equipment.
READY TO VERIFY YOUR PART?
Get a TMG740-3 MOD 43-35 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
