PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Monitored field switch inputs for the Regent platform
ICS Triplex T3411 is a Regent monitored digital input module that senses sixteen field devices. It regulates the connected field supply to power its input circuits and reports switch states and field-wiring conditions to the controller for program logic.
Suitable monitoring devices at the field switches enable open-circuit and short-circuit detection. Two or three matching modules can operate in parallel for fault-tolerant input sensing, provided the sensor arrangement, field connections and application voting logic follow the manufacturer configuration.
Suitable monitoring devices at the field switches enable open-circuit and short-circuit detection. Two or three matching modules can operate in parallel for fault-tolerant input sensing, provided the sensor arrangement, field connections and application voting logic follow the manufacturer configuration.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where T3411 Fits in Industrial Production Facilities
Use spans process industries and utility facilities, subject to the installed hardware, connections and approved configuration.
-
01 · POWER GENERATION
Power Plant Operations and Electricity Production Facilities
Boiler auxiliary equipment and generation plant fuel handling facilities.Power station utility equipment serving continuous electricity production operations. -
02 · CHEMICAL PROCESSING
Chemical Production Facilities and Material Preparation Equipment
Chemical batch vessels and associated raw material preparation equipment.Continuous chemical production lines with mixing and transfer equipment. -
03 · OIL & GAS
Petroleum Production Sites and Gas Handling Facilities
Upstream production equipment and gas treatment facilities serving pipelines.Refinery processing units and petroleum storage terminal handling equipment.
Technical specifications for T3411
-
Product ModelT3411
-
Product ParametersRegent monitored digital input module
-
In stock1 unit
-
ManufacturerICS Triplex
-
Input channels16, common power return
-
Field power input15-80 V DC; internally regulated to 24 V DC
-
Maximum field power current450 mA
-
Maximum input current5.0 mA
-
Input switching delay10 ms maximum, turn-on and turn-off
-
Safetybus load0.85 load units
-
Heat dissipation8.5 W
-
Field-to-logic isolation2500 V minimum
-
Field power terminal overvoltage100 V DC continuous
-
Input terminal overvoltage27 V DC continuous
-
Input circuit test intervalTypically less than 2 seconds; scan and I/O size dependent
-
Slot keysupper connector 4, lower connector 7
-
Operating temperature0 to +60 degrees C
-
Storage temperature-40 to +85 degrees C
-
Humidity0-95% RH, noncondensing
View all additional
Alternative Names
T3411 Regent monitored digital input module
ICS Triplex T3411 16-point monitored input module
T3411 Regent 24 V digital input unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
REGENT EQUIPMENT
Match T3411 to the documented Regent configuration
This module belongs to Regent, not Trusted. Match its configured I/O chassis slot, field-power arrangement, line-monitor devices and the application input voting method.
Use the approved Regent I/O position and the manufacturer field connection drawing; slot keys: upper connector 4, lower connector 7. The module accepts 15-80 V DC field power and internally regulates it to 24 V DC for the field-input circuits.
Select the exact module type in the WINTERPRET I/O Configuration Editor. Check point tags, thresholds, fault tags and voting logic.
Features:
- Sixteen monitored digital input points
- Automatic input circuit testing
- Open and short field wiring detection
The ICS Triplex T3411 regent monitored digital input module requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record the complete T3411 identity and compare its hardware revision with the installed item. Retain the complete model and any F suffix. T3411 and T3411F use different field input power arrangements and slot keys; shared channel count does not establish substitution.
Use the approved Regent I/O position and the manufacturer field connection drawing; slot keys: upper connector 4, lower connector 7. Select the exact module type in the WINTERPRET I/O Configuration Editor. Check point tags, thresholds, fault tags and voting logic.
Use the controlled manufacturer procedure and the approved maintenance plan. For energize-to-trip safety inputs, retain the manufacturer requirement for field line monitors and configured fault alarms. Use the complete safety instructions.
Features:
- Complete order identity retained
- Companion equipment and configuration checked
- No unconditional substitution claim
The ICS Triplex T3411 regent monitored digital input module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Amikon-authored summaries and manufacturer-hosted manuals are listed here. Check the complete product identity and document scope before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the ICS Triplex T3411 regent monitored digital input module must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about T3411
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is T3411 a Trusted I/O module?
No. Its manufacturer manual identifies ICS Regent. Do not use Trusted chassis, SmartSlot or IMB descriptions for this product. -
How many input devices can be sensed?
Sixteen. Input states and line-status information are reported to the controller. Fault tolerance requires the documented parallel-module and application voting arrangement. -
How is field input power provided?
The module accepts 15-80 V DC field power and internally regulates it to 24 V DC for the field-input circuits. -
Does line monitoring work without field components?
Open and short circuit detection requires the appropriate line-monitor device at the field switch. Component selection depends on field voltage and sensor redundancy. -
Can T3411 and T3411F be exchanged directly?
No unrestricted replacement is established. Their field powering arrangements and upper slot keys differ, even though both have sixteen monitored inputs. Verify the controlled drawings and exact module definition. -
Which configuration tool is described?
The manual uses the WINTERPRET I/O Configuration Editor. Select the exact module type and check the configured points, thresholds, line-fault variables and application voting logic. -
Does hot replacement apply to every installation?
No. The manual describes replacement without interruption in correctly configured fault-tolerant arrangements. Follow the controlled Regent procedure for the actual redundancy and process conditions.
READY TO VERIFY YOUR PART?
Get a T3411 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
