PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- General Electric
- GE Mark VIe
- IS220PSCAH1B
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
IS220PSCAH1B Serial Communication I/O Pack
General Electric IS220PSCAH1B is a serial communication i/o pack in the Mark VIe range. It interfaces serial field communication with the Mark VIe controller network. The H1B I/O pack is used with the documented SSCA terminal-board combinations.
The pack provides six configurable serial transceiver channels and two Ethernet network connections. RS-232, RS-422 and half-duplex RS-485 field standards are supported through the configured terminal board. The H1B power limits differ from H1A; verify the terminal board, serial protocol, DC supply and network configuration before commissioning.
The pack provides six configurable serial transceiver channels and two Ethernet network connections. RS-232, RS-422 and half-duplex RS-485 field standards are supported through the configured terminal board. The H1B power limits differ from H1A; verify the terminal board, serial protocol, DC supply and network configuration before commissioning.
BEFORE YOU BUY
Confirm the complete serial communication i/o pack
ACTUAL APPLICATIONS
Application context for IS220PSCAH1B
IS220PSCAH1B is a serial communication i/o pack in the Mark VIe range. It serves oil & gas, chemical processing, power generation. Suitability depends on the selected process, electrical ratings and installed configuration.
-
01 · OIL & GAS
Oil Refining and Natural Gas Production
Petroleum Refining and ProcessingNatural Gas Processing Production -
02 · CHEMICAL PROCESSING
Chemical Manufacturing and Petrochemical Production
Industrial Chemical ManufacturingPetrochemical Processing and Production -
03 · POWER GENERATION
Electric Power Generation and Energy Production
Thermal Power GenerationBiomass Energy and Cogeneration
Technical specifications for IS220PSCAH1B
-
Product ModelIS220PSCAH1B
-
Product ParametersSerial Communication I/O Pack
-
In stock8 units
-
ManufacturerGeneral Electric
-
Supply voltage minimum22.5 V DC
-
Nominal supply selections24 or 28 V DC
-
Supply voltage maximum28.6 V DC
-
Maximum supply current0.36 A
-
Serial transceiver quantity6
-
Serial electrical standardsRS-232, RS-422 or RS-485 half-duplex
-
Ethernet connection count2
-
Supported serial protocolModbus
-
Compatible terminal boardsIS200SSCAH1A or IS200SSCAH2A
-
Ambient temperature rating-30 to +65 ℃
-
Pack health indicationLocal diagnostic LEDs
-
Local service interfaceInfrared serial port
-
External DC power connector3 pins
-
Ethernet communications mediaRJ-45 Ethernet
-
Terminal attachmentDC-37 connection
View all additional
Alternative Names
IS220PSCAH1B
Mark VIe Serial Communication I/O Pack
VIe 22.5 V DC supply voltage minimum
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate IS220PSCAH1B serial communication i/o pack
General Electric IS220PSCAH1B is a serial communication i/o pack in the Mark VIe range. It interfaces serial field communication with the Mark VIe controller network. The H1B I/O pack is used with the documented SSCA terminal-board combinations.
The pack provides six configurable serial transceiver channels and two Ethernet network connections. RS-232, RS-422 and half-duplex RS-485 field standards are supported through the configured terminal board. The H1B power limits differ from H1A; verify the terminal board, serial protocol, DC supply and network configuration before commissioning.
Use the applicable Mark VIe documentation for IS220PSCAH1B. Verify the complete configuration, connection assignments and environmental limits, then record the functional checks before commissioning.
Features:
- Supply voltage minimum: 22.5 V DC
- Nominal supply selections: 24 or 28 V DC
- Supply voltage maximum: 28.6 V DC
The IS220PSCAH1B serial communication i/o pack requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify IS220PSCAH1B serial communication i/o pack
Identify the complete IS220PSCAH1B nameplate and the installed Mark VIe configuration before replacement. Match all connectors and the documented electrical ratings.
The pack provides six configurable serial transceiver channels and two Ethernet network connections. RS-232, RS-422 and half-duplex RS-485 field standards are supported through the configured terminal board. The H1B power limits differ from H1A; verify the terminal board, serial protocol, DC supply and network configuration before commissioning.
After fitting IS220PSCAH1B, restore the recorded configuration and verify every affected signal or communication path. Retain diagnostic results and the acceptance record.
Features:
- Supply voltage minimum: 22.5 V DC
- Nominal supply selections: 24 or 28 V DC
- Supply voltage maximum: 28.6 V DC
The IS220PSCAH1B serial communication i/o pack requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the IS220PSCAH1B serial communication i/o pack must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8.2 × 12.2 × 6cm
-
Shipping weight0.36kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about IS220PSCAH1B
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How many serial channels are available on the PSCA pack?
IS220PSCAH1B has six independently configurable serial transceiver channels. -
Which serial electrical standards can PSCA use?
IS220PSCAH1B supports RS-232, RS-422 and RS-485 half-duplex as documented for the configured channel. -
Can the H1A minimum supply limit be applied to H1B?
No. The manufacturer identifies a 22.5 V DC minimum for IS220PSCAH1B; H1A has a different minimum. -
Which SSCA terminal boards are approved with H1B?
The manufacturer lists IS200SSCAH1A and IS200SSCAH2A as the accessory boards for IS220PSCAH1B. -
What maximum DC supply must be respected?
The documented IS220PSCAH1B maximum supply is 28.6 V DC, with maximum current 0.36 A. -
How is a local communication fault investigated?
Use the IS220PSCAH1B diagnostic indications and documented local service interface while comparing serial and network settings with the accepted configuration. -
What field-network details identify a PSCA spare enquiry?
Provide IS220PSCAH1B, SSCA board code, serial protocol/electrical mode, controller network and installed revision. -
What should be checked on arrival of a serial I/O pack?
Check the IS220PSCAH1B label, power connector and terminal-board mating connection, then verify serial and IONet communication before return to service.
READY TO VERIFY YOUR PART?
Get a IS220PSCAH1B quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
IS220PSCAH1BSerial Communication I/O PackManufacturer: General ElectricView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
