PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
FBM207C Fieldbus I/O module
Foxboro FBM207C is a Fieldbus I/O module in the Foxboro I/A Series DCS. It is used to perform the assigned signal, control or interface function in the installed equipment.
Its documented configuration includes i/o function of Voltage/contact input, channel configuration of 16 inputs, signal range of Voltage monitor / contact sense, and module fieldbus of Redundant 2 Mbps. During operation, the Fieldbus I/O module performs its assigned Fieldbus I/O module function through the documented power, signal and communication interfaces.
Its documented configuration includes i/o function of Voltage/contact input, channel configuration of 16 inputs, signal range of Voltage monitor / contact sense, and module fieldbus of Redundant 2 Mbps. During operation, the Fieldbus I/O module performs its assigned Fieldbus I/O module function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete Fieldbus I/O module
ACTUAL APPLICATIONS
Where FBM207C Fits Across Major Industry Sectors
Uses span chemicals, food and water, subject to verified compatibility, operating conditions and project requirements.
-
01 · CHEMICAL PROCESSING
Silicone Material Production and Specialty Chemical Manufacturing
Silicone material production and blending for industrial manufacturing markets.Specialty chemical formulation and processing for commercial product manufacturing. -
02 · FOOD & BEVERAGE
Food Ingredient Processing and Commercial Beverage Manufacturing
Food ingredient production and processing for commercial food manufacturing.Beverage production and batch processing for consumer retail markets. -
03 · WATER & WASTEWATER
Water Treatment and Industrial Wastewater Processing Operations
Water treatment and supply for industrial and municipal services.Wastewater processing and treatment within commercial and industrial operations.
Technical specifications for FBM207C
-
Product ModelFBM207C
-
Spare ModelP0917GY
-
Product ParametersFieldbus I/O module
-
In stock1 unit
-
ManufacturerInvensys
-
I/O FunctionVoltage/contact input
-
Channel Configuration16 inputs
-
Signal RangeVoltage monitor / contact sense
-
Module FieldbusRedundant 2 Mbps
-
Supply Voltage24 V DC
-
MountingModular baseplate
-
Operating Temperature-20 to +70 °C
-
Module Series200 Series FBM
-
System PlatformFoxboro DCS
View all additional
Alternative Names
FBM207C
Foxboro Fieldbus I/O module
Foxboro I/A Series DCS Fieldbus I/O module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match FBM207C to the installed Foxboro I/A Series DCS
Foxboro FBM207C is a Fieldbus I/O module for Foxboro I/A Series DCS. Its exact article identity determines the supported field, control or communication function and the approved companion hardware.
Engineering should compare i/o function (Voltage/contact input), channel arrangement (16 inputs) and field signal (Voltage monitor / contact sense) with the installed system design.
Use the applicable manufacturer documentation for wiring and configuration. Validate communication, signal conversion or control response with the connected equipment before returning the process to service.
Features:
- Exact identity: FBM207C
- Product class: Fieldbus I/O module
- Family: Foxboro I/A Series DCS
The Foxboro FBM207C requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete FBM207C identity before exchange
Replace FBM207C only after matching the complete article identity, Fieldbus I/O module, installed Foxboro I/A Series DCS role and documented hardware revision. Similar housings or related family numbers do not establish interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Record addresses, parameters and current diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Run the documented functional test and retain the acceptance record.
Features:
- Exact identity: FBM207C
- Product class: Fieldbus I/O module
- Family check: Foxboro I/A Series DCS
The Foxboro FBM207C requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for FBM207C
- Foxboro Foxboro I/A Series DCS references reviewed
- Exact Foxboro identity required before service
Documentation for Foxboro FBM207C must match the installed equipment; confirm document applicability before service.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size4.5 × 11 × 11.5 cm
-
Shipping weight0.32 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85389091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about FBM207C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should the exact FBM207C be identified for a quotation?
Provide the complete FBM207C label, quantity, clear nameplate and connector photographs, installed Foxboro I/A Series DCS system and destination country. -
Can another Foxboro part directly replace FBM207C?
Do not decide from appearance or a partial code. Match the complete identity, Fieldbus I/O module, field interface, hardware revision, connections and configured system role. -
What should be recorded before removing FBM207C?
Photograph each cable, connector, terminal, shield, earth point and adjacent module, then record addresses, parameters and active diagnostics. -
Which arrival checks apply to FBM207C?
Check the exact label, housing or board condition, connector keying, terminals, supplied accessories and packing before disturbing the installed unit. -
How should FBM207C be commissioned after installation?
Confirm the documented supply and wiring, restore the controlled configuration, review status diagnostics and test every affected signal or communication path. -
Which system information is needed before ordering FBM207C?
Confirm the installed Foxboro I/A Series DCS, controller or baseplate, termination hardware, field signal or protocol, hardware revision and current configuration. -
What compatibility checks are required for FBM207C?
Compare the complete suffix, electrical or signal class, connector arrangement, mounting position, system software and companion hardware. -
What service record should be retained for FBM207C?
Keep the original connection record, configuration backup, inspection findings, test measurements, diagnostics and final acceptance result.
READY TO VERIFY YOUR PART?
Get a FBM207C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
