PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Invensys
- Triconex
- 4000098-516
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
4000098-516 Termination interface cable for the Tricon safety instrumented system
Triconex 4000098-516 is a Termination interface cable used with the Tricon safety instrumented system. The complete order reference identifies the required hardware and must be matched to the installed chassis, baseplate, cable or field termination.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 4000098-516
Manufacturer documentation places the Termination Interface Cable in practical safety applications. The three cases below describe different operating tasks in which 4000098-516 performs its documented product-family role with the configured companion equipment.
- 01 · CHEMICAL & PETROCHEMICAL
Stabilize burner management with Termination Interface
As part of the fuel trains, flame signals and purge equipment, 4000098-516 provides its specified system function as a Termination Interface Cable. During startup permissive check, the system uses this function to confirm permissives before enabling the hazardous step, helping it prevent fuel admission before purge conditions are met. - 02 · POWER GENERATION
Stabilize boiler protection with Termination Interface
For the coordinated operation of the furnace-pressure, level and final-element circuits, 4000098-516 operates in its approved product-family role as a Termination Interface Cable. During unsafe combustion condition, the system uses this function to execute the approved master-fuel-trip logic, helping it limit escalation of the boiler event. - 03 · OIL & GAS
Regulate pipeline isolation with Termination Interface
Inside the line-pressure inputs and sectionalizing valves, 4000098-516 operates in its approved product-family role as a Termination Interface Cable. During confirmed line event, the system uses this function to isolate the affected transfer section, helping it contain the event within the intended section.
Technical specifications for 4000098-516
-
Product Model4000098-516
-
Product ParametersTermination interface cable
-
In stock1 unit
-
ManufacturerInvensys
-
Product ClassFactory-terminated interface cable
-
Order Reference4000098-516
-
System PlatformTricon safety controller
-
Cable FunctionTermination assembly connection
-
Nominal Length10 ft / 3.05 m
-
Conductor ArrangementIndustrial multi-core signal bundle
-
Connector StyleKeyed Triconex system plugs
-
Shield ConstructionOverall EMI-protection screen
-
Signal DirectionBidirectional field interface path
-
Installation ZoneProtected control cabinet routing
-
Bend RequirementNo sharp bends or tensile load
-
Separation RuleRoute apart from power conductors
-
Termination CheckLatch both mating connectors
-
Identification RuleRetain endpoint cable labels
-
Replacement ControlMatch complete assembly suffix
View all additional
Alternative Names
4000098-516
Triconex 4000098-516
Invensys 4000098-516
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match 4000098-516 to the installed Triconex configuration
Triconex 4000098-516 is a Termination interface cable for the Tricon safety instrumented system. Verify the complete product identity and controller generation before integration.
Match all mating modules, baseplates, termination panels, cables, field power and signal assignments. Preserve approved project records.
Complete the manufacturer-recommended diagnostics and site functional test after installation.
Features:
- Exact product identity: 4000098-516
- Product class: Termination interface cable
- Model-specific values listed in the specifications
The Triconex 4000098-516 requires its ratings, wiring and installed configuration to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the full replacement identity before commissioning
Replace Triconex 4000098-516 only after matching the complete order reference, hardware revision, connector or terminal arrangement and installed function.
Record the existing slot, cable and field-terminal labels before removal. Transfer only configuration data approved for the exact hardware and project.
After installation, verify power, communications, every connected point, alarm response and the complete safety function.
Features:
- Match the complete 4000098-516 identifier
- Compare revision, connectors and mating hardware
- Test diagnostics and field operation before service
The Triconex 4000098-516 requires replacement verification against the installed hardware and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Available documents must be matched to the complete 4000098-516 identity, installed system and applicable revision.
Features:
- Model-specific data sheet prepared for 4000098-516
- Manufacturer guide reference identified before order
- Installation steps follow Triconex maintenance controls
Documentation for Triconex 4000098-516 must match the installed system and revision; confirm manual availability in the written quotation.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
- 01
Shipping & delivery
- DispatchEligible stock: same / next day
- CarriersDHL, FedEx or UPS
- Ship fromXiamen, China
- Packed size14 × 13.8 × 8.5 cm
- Shipping weight0.74 kg
- 02
Payment & customs
- PaymentBank transfer (T/T)
- CurrenciesUSD · EUR · GBP · RMB
- Credit cardsNot accepted
- HS reference8544422900
- OriginUnited States
- 03
Warranty & returns
- Warranty12 months from AMIKON
- InspectionLabel, condition and packing checks
- ReturnsPrior RMA authorisation required
- CompatibilityConfirm before order
- OEM warrantyDoes not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
Part checked
Full suffix recordedCondition checked
Label and appearancePacking checked
Antistatic protectionTracking supplied
Established couriersSandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 4000098-516
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which two endpoints does cable assembly 4000098-516 connect?
For the Factory-terminated interface cable, product class is Factory-terminated interface cable. Confirm this identity against the installed nameplate and cabinet records. -
What does the -516 suffix identify on this termination cable?
For the Factory-terminated interface cable, system platform is Tricon safety controller. Use the manufacturer value when checking the existing hardware and field circuit. -
How should both connector labels be captured before disconnection?
For the Factory-terminated interface cable, nominal length is 10 ft / 3.05 m. Record the actual installation before any connector, module or terminal is moved. -
Why must this interface cable be separated from power conductors?
For the Factory-terminated interface cable, shield construction is Overall EMI-protection screen. Keep the documented arrangement intact and correct any discrepancy before energising. -
What bend and pulling limits protect the multi-core signal bundle?
For the Factory-terminated interface cable, bend requirement is No sharp bends or tensile load. Review the indicated condition together with active controller diagnostics. -
How are the keyed Triconex plugs checked for full engagement?
For the Factory-terminated interface cable, termination check is Latch both mating connectors. Do not assume interchangeability from appearance; the complete configuration must agree. -
Which shield condition should be inspected along the 10 ft assembly?
For the Factory-terminated interface cable, identification rule is Retain endpoint cable labels. Retain the result in the maintenance record for the affected safety function. -
What continuity test is appropriate after routing 4000098-516?
For the Factory-terminated interface cable, replacement control is Match complete assembly suffix. Complete the stated commissioning check before returning the equipment to service.
READY TO VERIFY YOUR PART?
Get a 4000098-516 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
