PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Invensys
- Triconex
- AD4000189-530
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
AD4000189-530 High-density cable assembly for the Tricon safety instrumented system
Triconex AD4000189-530 is a High-density cable assembly used with the Tricon safety instrumented system. The complete order reference identifies the required hardware and must be matched to the installed chassis, baseplate, cable or field termination.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
Manufacturer documentation lists the applicable electrical, signal and installation characteristics. Verify the nameplate, hardware revision, connector layout and project records before replacement.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for AD4000189-530
Manufacturer documentation places the High-Density Cable Assembly in practical safety applications. The three cases below describe different operating tasks in which AD4000189-530 performs its documented product-family role with the configured companion equipment.
- 01 · POWER GENERATION
Control fuel-gas isolation with High Density process control
During operation of the gas-pressure signals and double-block valves, AD4000189-530 performs its assigned control role as a High-Density Cable Assembly. During confirmed fuel-system trip, the system uses this function to close the documented isolation path, helping it stop fuel flow to the protected equipment. - 02 · OIL & GAS
Sequence wellhead shutdown with High Density process control
In the automation chain for the pressure transmitters and shutdown valves, AD4000189-530 operates in its approved product-family role as a High-Density Cable Assembly. During trip demand, the system uses this function to evaluate the approved cause-and-effect inputs, helping it limit continued hydrocarbon release. - 03 · CHEMICAL & PETROCHEMICAL
Route high-pressure reactor protection with High Density
Within the pressure channels and depressuring valves, AD4000189-530 performs its assigned control role as a High-Density Cable Assembly. During confirmed high-pressure demand, the system uses this function to apply the approved voting logic to the protection channels, helping it reduce the protected vessel toward safe pressure.
Technical specifications for AD4000189-530
-
Product ModelAD4000189-530
-
Product ParametersHigh-density cable assembly
-
In stock1 unit
-
ManufacturerInvensys
-
Product ClassHigh-density cable assembly
-
System PlatformTricon safety instrumented system
-
Order ReferenceAD4000189-530
-
Interface ArrangementPrewired Tricon termination connection
-
Nominal Cable Length30 ft / 9.1 m
-
Conductor Configuration25 pairs × 22 AWG
-
Voltage Rating300 V
-
Current RatingSignal-level multi-pair service
-
Characteristic ImpedanceTwisted-pair signal geometry
-
Electrical IsolationFactory-tested multi-pair insulation
-
Operating Temperature−40–75 °C
-
Storage Temperature−40–80 °C
-
Relative Humidity5–95% noncondensing
-
Shielding ConstructionOverall industrial cable shield
-
Flame PerformanceFT4; AWM 2464
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match AD4000189-530 to the installed Triconex configuration
Triconex AD4000189-530 is a High-density cable assembly for the Tricon safety instrumented system. Verify the complete product identity and controller generation before integration.
Match all mating modules, baseplates, termination panels, cables, field power and signal assignments. Preserve approved project records.
Complete the manufacturer-recommended diagnostics and site functional test after installation.
Features:
- Exact product identity: AD4000189-530
- Product class: High-density cable assembly
- Model-specific values listed in the specifications
The Triconex AD4000189-530 requires its ratings, wiring and installed configuration to be checked before system integration and commissioning.
INTERCHANGEABILITY
Verify the full replacement identity before commissioning
Replace Triconex AD4000189-530 only after matching the complete order reference, hardware revision, connector or terminal arrangement and installed function.
Record the existing slot, cable and field-terminal labels before removal. Transfer only configuration data approved for the exact hardware and project.
After installation, verify power, communications, every connected point, alarm response and the complete safety function.
Features:
- Match the complete AD4000189-530 identifier
- Compare revision, connectors and mating hardware
- Test diagnostics and field operation before service
The Triconex AD4000189-530 requires replacement verification against the installed hardware and project documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Available documents must be matched to the complete AD4000189-530 identity, installed system and applicable revision.Features:
- Model-specific data sheet prepared for AD4000189-530
- Manufacturer guide reference identified before order
- Installation steps follow Triconex maintenance controls
Documentation for Triconex AD4000189-530 must match the installed system and revision; confirm manual availability in the written quotation.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
- 01
Shipping & delivery
- DispatchEligible stock: same / next day
- CarriersDHL, FedEx or UPS
- Ship fromXiamen, China
- Packed size36 × 32 × 10.5 cm
- Shipping weight3.65 kg
- 02
Payment & customs
- PaymentBank transfer (T/T)
- CurrenciesUSD · EUR · GBP · RMB
- Credit cardsNot accepted
- HS reference8544422900
- OriginUnited States
- 03
Warranty & returns
- Warranty12 months from AMIKON
- InspectionLabel, condition and packing checks
- ReturnsPrior RMA authorisation required
- CompatibilityConfirm before order
- OEM warrantyDoes not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
Part checked
Full suffix recordedCondition checked
Label and appearancePacking checked
Antistatic protectionTracking supplied
Established couriersSandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about AD4000189-530
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should Voltage Rating be interpreted when selecting AD4000189-530?
For AD4000189-530, the manufacturer reference states Voltage Rating as 300 V; use that value with the complete nameplate and installed system. -
What installation decision is controlled by Characteristic Impedance on AD4000189-530?
Plan the AD4000189-530 connection around Twisted-pair signal geometry for Characteristic Impedance, then verify its mating hardware and terminal assignment before installation. -
Which commissioning check confirms the stated Operating Temperature for AD4000189-530?
On AD4000189-530, measure or diagnose the applicable channel and confirm it agrees with −40–75 °C, the documented Operating Temperature for this hardware. -
Why must maintenance staff verify Relative Humidity before replacing AD4000189-530?
A mismatch in Relative Humidity can change AD4000189-530 compatibility or field behavior; the required reference for this product is 5–95% noncondensing. -
What field condition must remain within the Flame Performance specification for AD4000189-530?
Keep the circuit connected to AD4000189-530 within FT4; AWM 2464 for Flame Performance and investigate any reading outside the manufacturer specification. -
How does the published System Platform affect wiring or system compatibility for AD4000189-530?
The AD4000189-530 System Platform entry is Tricon safety instrumented system; apply it when checking cables, baseplates, field power and the approved project configuration. -
What record should be compared with the Interface Arrangement value before AD4000189-530 is energised?
Before powering AD4000189-530, compare the site drawing, nameplate and maintenance record against Prewired Tricon termination connection for Interface Arrangement. -
Which post-installation test relates directly to Conductor Configuration on AD4000189-530?
After installing AD4000189-530, test the related point, port or circuit against 25 pairs × 22 AWG, then record the Conductor Configuration result.
READY TO VERIFY YOUR PART?
Get a AD4000189-530 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
