Close Menu
Get Parts Quote
Name
Company *
WhatsApp / WeChat (For Faster Quote) *
Email *
Address
City
State / Province / Region
Zipcode
Country
Quantity *
Part Number *
Manufacturer
Preferred Condition
Additional Information
Cancel
Nautibus VME-PROF-M
Nautibus VME-PROF-M
Nautibus VME-PROF-M
Nautibus VME-PROF-M
Nautibus VME-PROF-M
Nautibus VME-PROF-M
· Product image is representative; revision or series may vary. Contact us to request a specific version.

VME-PROF-M

VMEbus PROFIBUS DP master interface

Shipping Information

  • For inventory products, we support same day shipping upon payment.
  • For urgent needs, we offer same-day shipping on most items for orders placed before 2:00 PM UTC+8 Simply mention your preferred next-day shipping when place the order, and your order will be prioritized to minimize downtime.
  • For indent items, typical turnaround is 1-3 weeks, depending on parts availability and scarcity.
Customs & Documentation
We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
Payment
Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
Product Condition
Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
Quantity
Mobile *
Country/Region *
E-mail *
Company
Content *
(gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)
For more information on how your data is processed and stored by Amikong please read our privacy policy.
  • 20+

    years in automation
  • ISO 9001

    certified quality system
  • 12 months

    amikon warranty
  • 2-hour reply

    from your account manager
  • Success Story

    solutions in action
PRODUCT DESCRIPTION

VME-PROF-M VMEbus PROFIBUS DP master interface

Nautibus VME-PROF-M links a VMEbus host with PROFIBUS DP I/O through a galvanically isolated RS485 master interface. The A24/D16 slave connection exposes a 64 kB dual-port memory window for exchange with the host application.

The interface supports PROFIBUS rates up to 12 Mbit/s and free-running DP-V0 or fixed-cycle DP-V2 transfer. An RS232 configuration port is used with DPKonfig and slave GSD files to define the network, process-data layout and bus timing.
ACTUAL APPLICATIONS

Application fields for VME-PROF-M

These broad application fields reflect the documented function and technical characteristics of VME-PROF-M.
  • 01 · INDUSTRIAL MANUFACTURING

    Discrete Manufacturing and Continuous Product Processing

    Industrial component production and continuous material manufacturingAssembly production and precision product manufacturing processes
  • 02 · METALS & MINING

    Primary Metals and Mineral Material Production

    Primary metal production and mineral raw material processingNonferrous metal production and mineral product manufacturing
  • 03 · AUTOMOTIVE MANUFACTURING

    Vehicle Production and Automotive Component Manufacturing

    Vehicle body production and automotive component manufacturingAutomotive electronics production and precision parts manufacturing

Technical specifications for VME-PROF-M

  • Product Model
    VME-PROF-M
  • Product Parameters
    VMEbus PROFIBUS DP master interface
  • Manufacturer
    Nautibus
  • VMEbus interface
    A24, D16 slave
  • Dual-port memory
    64 kB
  • RAM
    128 kB
  • Flash memory
    512 kB bootblock Flash EPROM
  • Processor
    32-bit
  • PROFIBUS interface
    1 RS485; galvanically isolated
  • Maximum PROFIBUS speed
    12 Mbit/s
  • Serial configuration interface
    1 RS232
  • Protocol
    PROFIBUS DP Master 1; EN 50170
  • Input telegram
    244 bytes maximum per slave
  • Output telegram
    244 bytes maximum per slave
  • 5 V current
    700 mA typical
  • Operating temperature
    0–50 °C
  • Storage temperature
    −25 to +70 °C
  • Address window
    64 kB; S1/S2 HEX switches
View all additional

Alternative Names

VME-PROF-M VMEbus PROFIBUS DP VMEbus PROFIBUS DP master interface
SYSTEM & REPLACEMENT CHECK

Information needed before ordering

Three direct checks to secure your system integration and minimize ordering risks.

Information

System integration Replacement check Manuals & support
SYSTEM INTEGRATION

Integrate VME-PROF-M within VMEbus PROFIBUS DP

Reserve the 64 kB VME address window and set its base address with HEX switches S1 and S2. Install the run jumper as required by the application and secure both front-panel screws for grounding, with the VME system switched off during installation.
Use the RS232 null-modem configuration connection and DPKonfig with the GSD files for every slave. Add each slave module in its actual hardware order and check the assigned dual-port RAM offsets against the host program.
Select a baud rate compatible with the cable length and slowest slave, then set a robust DP cycle and watchdog relationship. The manual places data-control time above twice the DP cycle and below half the slave watchdog time; verify startup without exposing the process to unintended outputs.

Features:

  • VMEbus interface: A24, D16 slave
  • Dual-port memory: 64 kB
  • VMEbus PROFIBUS DP
Use VME-PROF-M only within the documented VMEbus PROFIBUS DP arrangement and applicable installation instructions.
INTERCHANGEABILITY

Replace VME-PROF-M within VMEbus PROFIBUS DP

Save the existing DPKonfig project as a DP1 file and retain the GSD files, slave addresses and module order. Record the VME base-address switches, run jumper and firmware identification before removing the interface.
Match VME-PROF-M rather than assuming that the shorter VME-PROF-M3 front-panel format is identical. Reproduce the address window, process-data offsets, baud rate and timing settings needed by the existing VME host and slaves.
Load the approved project and check the interface indications and slave data-exchange state. Verify input and output offsets, watchdog behaviour and configured Autoclear response under a controlled process condition before returning the network to service.

Features:

  • VMEbus interface: A24, D16 slave
  • Dual-port memory: 64 kB
  • VMEbus PROFIBUS DP
Use VME-PROF-M only within the documented VMEbus PROFIBUS DP arrangement and applicable installation instructions.
DOCUMENTATION STATUS

Browse the Manuals, Datasheets, Official Documents, Links

Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.

Features:

  • Exact-model technical data for VME-PROF-M
  • Document applicability checked against the complete identity
  • Directory links by subcategory and brand
Documentation for VME-PROF-M must match the installed product identity and supplied configuration.

Also searched as

Important notice

Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION

Commercial terms without hidden steps

Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
  • 01

    Shipping & delivery

    Dispatch
    Eligible stock: same / next day
    Carriers
    DHL, FedEx or UPS
    Ship from
    Xiamen, China
    Product size
    2.00 x 18.60 x 26.10 cm
    Net weight
    0.18 kg
  • 02

    Payment & customs

    Payment
    Bank transfer (T/T)
    Currencies
    USD · EUR · GBP · RMB
    Credit cards
    Not accepted
    HS reference
    8517623990
    Origin
    Germany
  • 03

    Warranty & returns

    Warranty
    12 months from AMIKON
    Inspection
    Label, condition and packing checks
    Returns
    Prior RMA authorisation required
    Compatibility
    Confirm before order
    OEM warranty
    Does not apply
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
  • Part checked

    Full suffix recorded
  • Condition checked

    Label and appearance
  • Packing checked

    Antistatic protection
  • Tracking supplied

    Established couriers
  • Sandy Lin

    Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS

Questions buyers ask about VME-PROF-M

Direct answers about identity, compatibility, stock, warranty, payment and shipping.
  • Which VME access mode does VME-PROF-M use?

    It is an A24/D16 VMEbus slave with a 64 kB dual-port memory window.
  • Can it be configured by a PROFIBUS Class 2 master?

    The manual states that configuration by a Class 2 master is not supported.
  • Which files are required for replacement setup?

    Retain the DPKonfig DP1 project and the GSD files for every configured slave.
  • What is the maximum PROFIBUS rate?

    The interface supports up to 12 Mbit/s; the actual network rate must also suit slaves and cable length.
  • How are process-data addresses retained?

    Preserve the configured slave order and dual-port RAM offsets used by the VME host application.
  • Does VME-PROF-M3 have the same front-panel format?

    No. The manual identifies VME-PROF-M as a 3HE board with a 6HE/4TE front plate and M3 as 3HE/4TE.
  • Which power rails are required?

    The manual specifies +5 V at typically 700 mA; +5 V standby and ±12 V are not required.
  • What information should accompany a spare enquiry?

    Supply the exact M or M3 marking, firmware, front-panel photograph, VME address settings and required delivery date.
READY TO VERIFY YOUR PART?

Get a VME-PROF-M quote with price, lead time and revision check.

Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product

Product Browsing History