PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
OP-1500 OptiMate operator panel
Optimation OP-1500 is a OptiMate operator panel for OptiMate operator interfaces. It provides the documented interface, electrical characteristics and control role associated with its exact hardware identity.
Match the complete model, revision and connector arrangement before replacement. Preserve the installed configuration, verify all affected signal paths and complete controlled functional testing before returning the process to service.
Match the complete model, revision and connector arrangement before replacement. Preserve the installed configuration, verify all affected signal paths and complete controlled functional testing before returning the process to service.
BEFORE YOU BUY
Confirm the complete optimate operator panel
ACTUAL APPLICATIONS
Application context for OP-1500
OP-1500 is a OptiMate operator panel used within OptiMate operator interfaces. Its documented power budget is 5 VA at 8 to 30 V DC, while power connector is Keyed two-position terminal block. It supports assembly cell status entry, mixing process recipe selection and pump station status review across the listed industries.
-
01 · INDUSTRIAL MANUFACTURING
Production Operator Control and Machine Visualization
Assembly Cell Status EntryPackaging Area Setpoint Selection -
02 · FOOD & BEVERAGE
Batch Operator Control and Sequence Monitoring
Mixing Process Recipe SelectionPackaging Line Status Review -
03 · WATER & WASTEWATER
Utility Operator Control and Process Visualization
Pump Station Status ReviewTreatment Process Setpoint Entry
Technical specifications for OP-1500
-
Product ModelOP-1500
-
Product ParametersOptiMate operator panel
-
In stock1 unit
-
ManufacturerOpti Mate
-
Power budget5 VA at 8 to 30 V DC
-
Power connectorKeyed two-position terminal block
-
Minimum supply voltage8 V DC
-
Maximum supply voltage32 V DC
-
DiagnosticsLCD operator message and LED status
View all additional
Alternative Names
OP-1500
OptiMate operator interfaces OptiMate operator panel
operator interfaces 5 VA at 8 to 30 V DC power budget
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate OP-1500 optimate operator panel
OP-1500 is a OptiMate operator panel for OptiMate operator interfaces. Before connection, confirm the complete model identity and installed hardware position, then compare the documented power budget of 5 VA at 8 to 30 V DC with the existing configuration and connected circuits.
Plan the integration around the published power connector of Keyed two-position terminal block. Preserve terminal assignments, addressing, communication settings and adjacent hardware relationships, and check every connection against the applicable drawing or product documentation before energising the assembly.
During commissioning, verify the stated minimum supply voltage of 8 V DC together with status indications and controller diagnostics. Test each affected signal or communication path under controlled conditions and archive the verified model, configuration and functional-test results.
Features:
- Provides power budget: 5 VA at 8 to 30 V DC
- Supports power connector: Keyed two-position terminal block
- Uses the documented optimate operator panel interface
The OP-1500 optimate operator panel requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify OP-1500 optimate operator panel
Use the complete OP-1500 designation when selecting a replacement OptiMate operator panel. Confirm that the replacement reproduces the documented power budget of 5 VA at 8 to 30 V DC; visually similar assemblies can differ in revision, interface allocation or electrical limits.
Before removal, photograph the label, connector positions, terminal numbering and adjacent slot arrangement. Compare the published power connector of Keyed two-position terminal block, and retain the installed addressing, scaling, network, safety and project records that apply to this exact article.
After fitting the verified replacement, restore the approved configuration and confirm the specified minimum supply voltage of 8 V DC. Check power-up indications and every affected input, output or communication path before service, then document the final identity and test results.
Features:
- Retains the documented optimate operator panel role
- Requires exact model and connector verification
- Supports controlled testing after exchange
The OP-1500 optimate operator panel requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Documents power budget for this article
- Records power connector for configuration review
- Identifies minimum supply voltage for maintenance checks
Documentation for the OP-1500 optimate operator panel must be checked for document applicability before installation or commissioning.
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24 × 10 × 5.5 cm
-
Shipping weight0.55 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about OP-1500
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the OptiMate operator panel OP-1500?
OP-1500 is a OptiMate operator panel identified for its documented industrial control family. -
Which power budget applies to the OptiMate operator panel OP-1500?
The documented power budget for OP-1500 is 5 VA at 8 to 30 V DC; verify the complete article before use. -
Which power connector applies to the OptiMate operator panel OP-1500?
The documented power connector for OP-1500 is Keyed two-position terminal block; verify the complete article before use. -
Which minimum supply voltage applies to the OptiMate operator panel OP-1500?
The documented minimum supply voltage for OP-1500 is 8 V DC; verify the complete article before use. -
Which maximum supply voltage applies to the OptiMate operator panel OP-1500?
The documented maximum supply voltage for OP-1500 is 32 V DC; verify the complete article before use. -
Can the OptiMate operator panel OP-1500 replace a similar article?
Compare the complete OP-1500 identity, revision, connectors and documented ratings before treating another article as interchangeable. -
What should be inspected when the OptiMate operator panel OP-1500 arrives?
Inspect the OP-1500 label, enclosure, connectors, terminals and supplied accessories against the written quotation. -
What should be recorded after replacing the OptiMate operator panel OP-1500?
Record the installed OP-1500 identity, position, connections, configuration and final functional-test results.
READY TO VERIFY YOUR PART?
Get a OP-1500 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
