PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Phytron
- 1-STEP-DRIVE-5A-48V
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
1-STEP-DRIVE-5A-48V Integrated stepper motor controller
Phytron 1-STEP-DRIVE-5A-48V is a Phytron stepper-motor controller with an integrated power stage for a SIMATIC ET 200S station. It drives two-phase stepper motors from a 24–48 V DC supply with phase current up to 5 A peak.
Fine current adjustment and microstep division up to 1/512 support the configured positioning profile. The module is integrated through the supplied STEP 7 or TIA Portal configuration files, with selectable chopper frequencies and separate limits for motor and signal cable runs.
Fine current adjustment and microstep division up to 1/512 support the configured positioning profile. The module is integrated through the supplied STEP 7 or TIA Portal configuration files, with selectable chopper frequencies and separate limits for motor and signal cable runs.
BEFORE YOU BUY
Confirm the complete 1-STEP-DRIVE-5A-48V identity
ACTUAL APPLICATIONS
Application fields for 1-STEP-DRIVE-5A-48V
These broad application fields reflect the documented function and technical characteristics of 1-STEP-DRIVE-5A-48V.
-
01 · METALS
Ferrous Metals and Nonferrous Minerals
Ferrous metals and primary mineral resourcesNonferrous metals and specialty mineral resources -
02 · LOGISTICS
Warehousing and Commercial Distribution
Warehousing and commercial goods distribution networksFreight logistics and commercial distribution channels -
03 · TRANSPORT
Rail Transport and Urban Mobility
Passenger rail transport and urban mobilityFreight transport and regional rail networks
Technical specifications for 1-STEP-DRIVE-5A-48V
-
Product Model1-STEP-DRIVE-5A-48V
-
Product ParametersIntegrated stepper motor controller
-
In stock8 units
-
ManufacturerPhytron
-
Motor phases2
-
Motor lead arrangements4 / 6 / 8 leads
-
Motor supply24 to 48 V DC
-
Maximum phase current5 A peak
-
Current-setting increment20 mA
-
Maximum microstep division1/512
-
Maximum step frequency510000 steps/s
-
Chopper frequencies18 / 20 / 22 / 25 kHz
-
Maximum supply current3 A at 5 A peak phase current
-
Digital inputs2
-
Maximum shielded motor cable50 m
-
Maximum shielded input cable100 m
-
Overtemperature threshold85 °C
-
Short-circuit thresholdAbove 10 A
-
Configuration environmentSTEP 7 / TIA Portal
View all additional
Alternative Names
1-STEP-DRIVE-5A-48V
Phytron 1-STEP-DRIVE
Integrated stepper motor controller
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 1-STEP-DRIVE-5A-48V within Phytron 1-STEP-DRIVE
Integrate the Phytron module into a supported ET 200S station using the supplied configuration files. Assign the positioning function in STEP 7 or TIA Portal and use the appropriate functional block for the selected engineering version.
Connect a compatible two-phase stepper motor with the specified four-, six- or eight-lead arrangement. Set the phase current to the motor requirement within the 5 A peak limit and supply the power stage with 24–48 V DC.
Select microstep division and chopper frequency for the required movement profile. Keep shielded motor cable within 50 m and shielded input cable within 100 m, and verify protection indications during commissioning.
Features:
- Motor phases: 2
- Motor lead arrangements: 4 / 6 / 8 leads
- Phytron 1-STEP-DRIVE
Use 1-STEP-DRIVE-5A-48V only within the documented Phytron 1-STEP-DRIVE arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace 1-STEP-DRIVE-5A-48V within Phytron 1-STEP-DRIVE
Save the motion parameters, phase-current setting and motor-lead arrangement. Isolate the motor supply and station circuit before disconnecting the module, and label phase and input leads clearly.
Retain the Phytron 1-STEP-DRIVE 5 A/48 V specification and compatible ET 200S mounting arrangement. Check the current setting and motor connection before restoring the saved positioning configuration.
Commission the axis under controlled conditions and verify direction, reference behaviour and commanded travel. Check for overtemperature or short-circuit indications and confirm the mechanical travel limits before release.
Features:
- Configuration environment: STEP 7 / TIA Portal
- Mating terminals and installed configuration
- Post-exchange functional validation
Use 1-STEP-DRIVE-5A-48V only within the documented Phytron 1-STEP-DRIVE arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Exact-model technical data for 1-STEP-DRIVE-5A-48V
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for 1-STEP-DRIVE-5A-48V must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size3.00 x 8.10 x 5.00 cm
-
Net weight0.08 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504403090
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1-STEP-DRIVE-5A-48V
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Who manufactures 1-STEP-DRIVE-5A-48V?
1-STEP-DRIVE-5A-48V is manufactured by Phytron for integration with the SIMATIC ET 200S platform. -
What motor supply does 1-STEP-DRIVE-5A-48V require?
1-STEP-DRIVE-5A-48V uses a 24–48 V DC motor supply and supports up to 5 A peak phase current. -
Which motors can 1-STEP-DRIVE-5A-48V drive?
1-STEP-DRIVE-5A-48V supports two-phase stepper motors with the specified four-, six- or eight-lead arrangements. -
What microstep division is available on 1-STEP-DRIVE-5A-48V?
The maximum specified microstep division for 1-STEP-DRIVE-5A-48V is 1/512. -
Which cable lengths are specified for 1-STEP-DRIVE-5A-48V?
1-STEP-DRIVE-5A-48V permits up to 50 m shielded motor cable and 100 m shielded input cable. -
What must be restored after changing 1-STEP-DRIVE-5A-48V?
Restore the 1-STEP-DRIVE-5A-48V phase-current setting, microstep selection, motion parameters and motor-lead arrangement, then validate direction and travel. -
What brand should be used on an 1-STEP-DRIVE-5A-48V purchase order?
Specify Phytron 1-STEP-DRIVE-5A-48V, while identifying SIMATIC ET 200S as the host platform rather than the module manufacturer. -
What software details should accompany an 1-STEP-DRIVE-5A-48V enquiry?
State the STEP 7 or TIA Portal version and required configuration files or functional-block scope for 1-STEP-DRIVE-5A-48V.
READY TO VERIFY YOUR PART?
Get a 1-STEP-DRIVE-5A-48V quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
1-STEP-DRIVE-5A-48VIntegrated stepper motor controllerManufacturer: PhytronView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
