PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- SICK
- WT24-2B210
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
WT24-2B210 photoelectric sensor
SICK WT24-2B210 is a W24 photoelectric proximity sensor for detecting objects without physical contact. It combines the optical emitter, receiver and switching electronics in a robust industrial sensor housing.
The sensor operates from a 10 to 30 V DC supply and provides a PNP switching output for the connected control circuit. Its optical alignment, switching threshold and connector arrangement support repeatable presence detection at the configured sensing position.
The sensor operates from a 10 to 30 V DC supply and provides a PNP switching output for the connected control circuit. Its optical alignment, switching threshold and connector arrangement support repeatable presence detection at the configured sensing position.
BEFORE YOU BUY
Confirm the complete WT24-2B210 identity
ACTUAL APPLICATIONS
Application fields for WT24-2B210
Three broad application areas are listed for WT24-2B210, with two concise application fields under each heading.
-
01 · PACKAGING INSPECTION
Consumer Packaging and Quality Inspection
Consumer packaging inspection and quality assuranceLabel verification and finished product checking -
02 · MATERIAL FLOW
Material Flow and Production Coordination
Material flow and production line coordinationComponent handling and assembly process tracking -
03 · WAREHOUSE LOGISTICS
Warehouse Logistics and Order Distribution
Warehouse logistics and order distribution activitiesInventory movement and shipment verification programs
Technical specifications for WT24-2B210
-
Product ModelWT24-2B210
-
Product ParametersPhotoelectric sensor
-
In stock1 unit
-
ManufacturerSICK
-
Sensing range100 to 2,500 mm
-
Supply voltage10 to 30 V DC
-
Switching frequency1,000 Hz
-
Response time≤500 µs
-
Maximum output current100 mA
-
Current consumption50 mA
-
Test inputTE to 0 V switches transmitter off
-
Operating temperature-40 to +60 °C
-
Storage temperature-40 to +75 °C
-
Sensor familySICK W24
View all additional
Alternative Names
WT24 2B210
SICK W24 photoelectric sensor
SICK photoelectric sensor
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate WT24-2B210 with its documented hardware and interface limits
WT24-2B210 is documented with sensing range 100 to 2,500 mm and supply voltage 10 to 30 V DC. Install it only in the matching rack, carrier, base unit, mounting position or product family specified by the manufacturer.
For integration, apply switching frequency 1,000 Hz, response time ≤500 µs, and maximum output current 100 mA. Keep the supply, load, interface and environmental conditions within these official limits.
Configure and verify current consumption 50 mA, test input TE to 0 V switches transmitter off, and operating temperature -40 to +60 °C. Complete the documented parameterization, diagnostics and functional checks before releasing the assembly for operation.
Features:
- Sensing range: 100 to 2,500 mm
- Switching frequency: 1,000 Hz
- Current consumption: 50 mA
The WT24-2B210 requires verified system integration using the official electrical, interface, installation and diagnostic data before operation.
REPLACEMENT CHECK
Verify the complete WT24-2B210 configuration before replacement
Before exchanging WT24-2B210, record the complete article number and compare sensing range 100 to 2,500 mm, supply voltage 10 to 30 V DC, and switching frequency 1,000 Hz with the installed unit.
Photograph the installed wiring, connectors, coding elements and mounting position. Preserve response time ≤500 µs, maximum output current 100 mA, and current consumption 50 mA when transferring the approved configuration.
After replacement, restore the documented parameters and verify test input TE to 0 V switches transmitter off together with operating temperature -40 to +60 °C. Run the applicable diagnostics, communication, signal or load test before returning the equipment to service.
Features:
- Exact identity: WT24-2B210
- Supply voltage: 10 to 30 V DC
- Maximum output current: 100 mA
Replacement of WT24-2B210 requires confirmation of the complete identity, installed wiring, parameter set and official functional checks before service.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Exact-model technical data for WT24-2B210
- Applicable SICK documentation
- Directory links by subcategory and brand
Documentation for WT24-2B210 must match the complete installed product identity, the documented SICK W24 configuration and the supplied photoelectric sensor before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size11.8 × 4.8 × 6.5 cm
-
Shipping weight0.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85365019
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about WT24-2B210
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which identity details must match WT24-2B210?
Confirm the full WT24-2B210 marking, WT24 execution, SICK W24 family and the documented 10-30 V DC characteristic. -
Which installed connections should be recorded for WT24-2B210?
Record the PNP switching output connection, keyed terminals, mounting position, adjacent components and all fitted accessories before removal. -
How is compatibility of WT24-2B210 checked?
Compare article number, product family, rated characteristic, mechanical format and interface arrangement with the approved equipment list. -
What should maintenance inspect on WT24-2B210?
Inspect the nameplate, housing, connectors, contacts, mounting hardware and visible condition before installation. -
Can a similar catalog number replace WT24-2B210?
Only after every suffix, electrical rating, connector arrangement, hardware revision and functional requirement has been confirmed. -
Which tests follow installation of WT24-2B210?
Complete controlled power-up, diagnostics and all affected functional checks before returning the equipment to service. -
What should a distributor include when quoting WT24-2B210?
Include WT24-2B210, quantity, WT24 execution, required 10-30 V DC characteristic, destination, requested delivery date and clear nameplate photographs. -
What should MRO receiving inspect for WT24-2B210?
Check the complete WT24-2B210 marking, manufacturer label, PNP switching output interface, connector and housing condition, quantity, accessories and documents against the purchase order.
READY TO VERIFY YOUR PART?
Get a WT24-2B210 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
